The Particleboard is laminated. Clean and low productivity lines. The traditional mates bed has smooth lines, 2 large drawers, and rounded edges. Useful storage: The drawers on the side of the bed are ideal for storing and organizing items in the unused space under the bed. No box spring is required. This bed is economical and charming, and you can place your mattress on top of the frame. The bed is made in North America with non-toxic laminated particleboard, which complies with all North American safety standards. 5-year limited warranty They stand behind this bed with drawers and a full 5-year limited warranty. It's necessary for assembly to be required. A queen size bed can hold 500 pounds. Ships in several boxes.
👤It has been a few years. I have had this bed for over two years and it holds up well. I sleep on it every night because it has undergone a lot of use and abuse. I'm 200 lbs. My 300lb friend has slept on it a few times, and for the most part, it has not been a problem. The only problem I have had with this bed is that the wood boards that go under the mattress started to break and fall where I sleep the most. I flipped them and it was a good fix for a while, but eventually it snapped and left my mattress sagging. I went to Home Depot with a good board in hand, measured it up, and got some plywood cut to the same dimensions for cheap, and shouldn't have a problem again.
👤When the bed was delivered, I questioned if it was just one box. The driver told me twice that there was nothing else. I could not build this bed with just a few pieces because it was too large. They helped me quickly order another bed. On the day after, it was discovered that another box was left on the truck and was to be delivered that day. I had to refuse delivery once the 2nd bed arrived 3 days later because I had to cancel the reorder. I put together the bed by myself, since I already put together the matching headboard. My daughter lives too far away to get the power screwdriver back, so I lent it to her, even though it was not needed for the bed. I didn't know that the muscles of my body were hurting after fastening many long screws. The instructions were easy to understand, but I still wish that a written explanation was available. The rails for the drawers on the bed frame were the most difficult issue to resolve. It was hard to see which way they were going. I love this bed. It is sturdy and in perfect order. I was surprised that there were no holes on the bed to attach the headboard. I decided to leave it alone since the bed is very heavy and I have a corner place.
👤I figured it out 3 hours after I saw the instructions, which only show black and white pictures. I was a little worried about missing nails or a huge chip on the parts, but overall I was very impressed with how sturdy and neat this look was. Since my bed is finished, I don't see where the chip part is, so I only saw 2 tiny chips that are not that big. It doesn't feel like it will break apart after sitting in it. I would buy another one of the bad reviews if I could.
👤I assumed that the quality of the bed was not great because it was easy to assemble. The bed is like putting your mattress on the floor, because it doesn't have the support for it. This is a cheap bed. I was surprised that for the price, I didn't see the same quality as Ikea, but since I was not able to find stock in my area, I decided to go with this one. I was a bit disappointed.
The Naples queen bed is made of poplar hardwood and engineered wood and has an Off white finish. Assembly with bolts is required. The product dimensions are 87” L x 64.75” W x 52” H. The mattress is not included. Comes with a clear coat finish to help protect against wear and tear from normal use. Ships in several boxes. Ships in several boxes.
👤I am very upset by the images and description of this bed. This bed is not white, it is cream, off white, antique, not sure what to say, but not white. I took advantage of the financing on the large order and will either have to paint a brand new piece of furniture or deal with the mess that will be caused by returning it. Completely false advertising and very edited photos. Attached is a photo with daylight bulbs and white walls.
👤The bed is beautiful. The pictures don't do it justice. My daughter needed a new bed to replace her twin bed. I searched for something that would match her furniture. The bed is listed as white, but it's actually more of a cream color, which is exactly what I was looking for. I wanted to make sure people were aware.
👤The bed was a nice guest bed for about a year, but one day the side rail cracked and the bed fell down, breaking two support legs as well. The bed is described as being more sturdy than it is, but many of the substantive parts are not hardwood or reinforced, which is not acceptable for a nearly $400 bed. The sides were warned about by other reviews. I contacted the company to inquire about getting replacement parts, but after nearly a week of back and forth, they finally said that they don't sell replacement parts, and neither do any suppliers, so if any piece of the bed breaks beyond a month, you can get a new one. We will either fix the bed or replace it. I will not buy this brand again.
👤We had high hopes for this bed. There were many problems. The first was that it was supposed to be in three separate boxes. Amazon says it comes in one box. Two boxes were given to us. The side rails were missing. Try to explain that to the customer service rep in another country. The front of the headboard had a large piece of it chipping out. The picture and description show that it is a yellowy-cream color. We returned it once we got the number of boxes.
👤My granddaughter's bedroom is at our house. It was delivered in three large boxes. I realized immediately that I would be doing some assembly. It was a very simple process with great directions and everything was engineered to fit perfectly. I had the entire bed frame assembled and 888-282-0465 was 888-282-0465. I am very happy with the purchase and would not buy from this seller again. It looks great, is strong and sturdy, and enhances the look of the room.
👤It is heavy, comes in three boxes and there is at least 20 feet of packing materials, but on the front of the headboard there is a small area that is not painted, so if you are looking for stark white don't believe that. I am going to the hardware store to get some wood to cut two more slats for the bed because I am about to put it together. I am 5'2 130 and don't think the slats will hold my mattress and box. If you have a heavy mattress, you might want to keep this in mind. The foam mattress has only three slats. I couldn't get the same bed in my town for less than 699.00, but I think it was a good deal. The color is not as white as you might think.
You can maximize space in your bedroom with minimalist style. Steel slats can be used to support a mattress. The mattress has a unique design to keep it from slipping. There is more under bed storage and no box spring required. It is easy to set up with no tools required. The dimensions for the mattress/box spring are 79.5 x 59.5 inches. Under bed clearance is 16.25-inch slats.
👤I read through 17 pages of questions while investigating this on Amazon. I will try to answer the 10 questions that are on the 17 pages so that you don't have to read the answers. We bought the king bed version and are using it with a 13” memory foam mattress. This is the first review. I will update in a month. The shipping weight is 59 pounds. The box is 42” x 21” It was packed well for shipping. They were vague about when it would arrive. We ordered it on Thursday and it arrived on Wednesday, a day earlier than the shipping confirmation said. The assembly is happening The instructions are easy to understand because they are in pictograph form. You don't really need the words when they are written in English. There are six long metal pieces that make up the perimeter of the bed and an eighth one that goes down the middle. The legs open on the three long pieces. The four pieces that make up the top and bottom are bolted together. The instructions are easy to understand. Don't start attaching them until you lay all the pieces out. The instructions say "A1*1" and "A*1" but they don't say "B" and "B1" to indicate there is. If you look closely at the diagram, you will see that the A and B pieces have slots for a headboard, but the B does not. It took my wife and I less than 15 minutes to assemble it. The pieces are not heavy. Lifting the mattress up onto the frame was the hardest part. There are two long bolts and 12 short bolts. The Allen wrench and nut wrench are the only tools required. Everything was easy to attach. The metal slats are snapped into the holders. Four slats have red dots on them. The slots have small tongues on the end that open into small openings. There are 9 metal slats on each side of the bed. Each slat is 12 inch wide on top and 8 inches apart from each other. The top of the slats is below the frame. This provides a lip to hold your mattress in place and it fits our king memory foam mattress very snug so that it won't move. You don't need a box spring if you use a mattress. The frame is 18 inches high, so the mattress and box spring are very high. The top of the 13 inch memory foam mattress is almost 32 inches off the floor. If you have a traditional mattress, you can put it on the slats. If you have a memory foam mattress without a box spring, you should put something in between to keep the foam from squeezing through the slats. You can use a sheet of cardboard, butparticle board, peg board, thin plywood, and anything else will work. If you want to put in something like that, be aware that the inside dimensions of that lip are 75.5” x 79.5” so you need something slightly smaller than that. Cut it in half to fit in your truck or SUV. My wife and I decided not to put anything between the slats and the memory foam. We bought something to go in between when we read the question answers for 1/3 of the memory foam owners. The memory foam leaking between the slats was reported by 1/3 of the people, and so far on the first day we don't think it will be a problem. There are hardwood floors. There are nice hardwood floors in our house. My wife didn't trust the plastic caps on the frame that protect the floor, so she bought rubber squares to put under the feet. The king bed version has 9 feet so you need 9 square rubber pads. You can go without a dust ruffle if you don't put anything under the bed. The metal is artistic. It is black metal with square corners. You should hide the frame if you are going to store things under the bed. The frame is 18 inches high so a traditional dust ruffle is too short. A woman answering a question said she attached fabric panels to the frame with a stick on the Velcro. We plan to do that. It was very quiet once assembled. The bed did not move when I was laying on it and I was over the 300 pound mark. There was a small squeak if I shook back and forth and got on all fours. Most of the question answerers and reviewers said that there is no squeak with heavy people doing the horizontal mambo. The bed is shaking for certain activities and there is a quiet squeak. I don't think anyone would hear it if they were 40 feet away. It was a slight disappointment. It doesn't change my rating since almost any bed would have more of a squeak than this.
The queen's outer dimensions are 86" L x 63" W and 51" H. There is a linen shirt with clothes. It's easy to impersonate. No box spring required! Brand new, comes in two boxes. Light Grey Silvery. Light Grey Silvery.
👤I will update if I hear back from the seller and they resolve the issue. The bed is in terrible condition. I'm not happy with how it looks. The material across the front is not stretched well and has a bigwrinkle in the middle which makes it look terrible. There is a nail on the top of the thing and the bottom part is coming apart. There is a small hole on the left side. My husband will have to take the entire front piece off to try and fix it. I used the piece to put the back of the wall because the fabric on the one side slat has a tear in it. If I don't hear back from the company soon, I will disassemble and buy elsewhere. The bed is sturdy and looks like it has been used for a while. Assembly was easy once you lable the parts correctly, please contact me asap.
👤The bed my boyfriend built for me was quite heavy for one person, some pieces came damaged, scratched metal legs and the wood cracked at the edges. I don't think this will last very long if you are expecting to move often and need to reassemble it. It is very sturdy. I have slept on this once and so far it is quite comfortable. They give you the tools to build the frame, but you won't. The wood has grooves in it that need to be drilled down.
👤I think the color is more of a beige than a gray, but it's still a nice neutral color with no weird blue or green colors that can be a problem with a lot of gray colors. There is a lot of room for storage bins. You can't beat the price. It arrived in less than 48 hours. One of the best deals I've ever seen on Amazon.
👤I love this bed frame. It is not prime. I was concerned about the shipping. It arrived here in perfect condition. It took my girlfriend and I about 20 minutes to put it together. It wasn't hard. If you're thinking about this bed frame, do it.
👤This is a two person job. The instructions were easy to follow. It came in two separate boxes, so don't be alarmed if one comes and the other doesn't. It was hard to tell the color of the photos online but the color is a perfect light gray/silver color. Very happy with the purchase.
👤I have been holding off on posting a review until I had a chance to use the bed. It was easy to put together with another person and it doesn't make any noise from the wood and metal. The bed is very low to the floor. If you want something low to the ground, this bed is for you. I don't know if the bed plank will support a box spring, which is counterintuitive to buying a bed for not needing a box spring. It isn't a platform as I wanted, but still a good bed for a great price.
The open footrail design is comfortable. Solid Hardwood with Non-Toxic Finish is Sustainably Sourced. It is designed for lasting Durability. There is a feature that adjusts the Headboard. The mattress sold separately is supported by the hardwood slat kit. The mattress sold separately is supported by the hardwood slat kit.
👤I give it a 4.5 out of 5, but that superficial scratch on the headboard is not what I want it to be. I will probably try to fit it with a little white paint, but that is not what I want it to be. It is perfect other than that. I thought the boxes were pretty good since one of them was damaged but nothing was missing, there were extra screws and bolts in all the boxes, and I live in Hawaii and everything gets damaged on its way here, so I thought it was pretty good. My boyfriend put it up in about an hour. I was very worried about the reviews but I am very happy with the results and would definitely recommend this bed. We will update if something goes wrong.
👤I was worried about the bed frame, but I think it came out well for the price and my small room. It was shipped in three boxes and all of them were of good quality. I did it myself and didn't need help. There was a small crack on the wood, which was out of sight. I had wood glue on hand so I ran a bit over it to be safe. A few of the screws have already been stripped. I had more from previous purchases. I'm plus size. I read in the comments that it wasn't sturdy, but it's done pretty good for me being almost 300 lbs. I like how it looks against the wall in my small room.
👤Two of the boxes were well protected and the other was not. There are cracks in the slats. The quality of finish and paint in the other two boxes was poor. Multiple scratches repaired poorly, crack in the side rail appeared to be repaired for looks on the outside only but not fixed - should have been thrown away at the factory. The bed was made in Indonesia. The reviews of other products from this company were very similar. Will contact the factory tomorrow.
👤The platform bed is very well made. I bought it for a latex mattress and I wish Atlantic Furniture would make the slats closer together, even if they have to raise the price slightly. Atlantic's response when I called was that it's made for their mattresses, which are not latex, and the slat spacing is larger than recommended for a latex mattress. I don't think it's a good idea to not make the latex mattress compatible out of the box. It's highly recommended, especially the Twin XL size.
👤The holes for the pegs were too short or too long. I had two major cracks in the headboard. I asked the carpeter if it was my installation error, and he said that cheap furniture is often made half baked. It looked like a great deal. We moved to Hawaii so I'm going to have to pay more to get the bed back. Too late. We covered the cracks with stickers, but that's not what I had in mind when I bought it.
Sturdy and durable steel. If you want to upgrade your bed frame and box spring, you can do so with this simple-to-build and easy-to-maneuver mattress foundation. The design is made of durable steel and has multiple points of contact with the floor and plastic caps to protect it. All sizes of mattress can be rest on top of the steel slatted platform, but narrow twin, twin and twin XL sizes can support up to 750 lbs. It takes less than an hour to setup with all the tools, parts and instructions packed into one Compack shipping box. The mattress is sold separately.
👤I used brackets to hold my mattress in place. Attached is a picture.
👤The welds on the middle section have separated in 3 different places. Poor quality of frame really disappointed me. The company did not respond to warranty requests by February of this year. There are a lot of comments to the negative reviews of the company stating that there is a 5 year warrant and email and phone number. I have not received a response from the company to my original review. The customer support email address does not respond to email when the 800 number goes straight to voicemail.
👤I love this bed frame. The mattress sliding was one of the reviews I saw. I added hot glue to the slats to give them some grip, instead of putting the mattress on them. Works well.
👤I bought this for my nephew. His mom called me last night and said the frame broke. The description makes these seem to be impervious. I asked my sister how it broke, and she said he sat on one end to put on his shoes and it broke. My nephew is a teen who is around 120 lbs, so he wasn't the issue. The beds are covered for 5 years if the damage was caused by faulty manufacturing. Will wait to see what happens. If the bed frame is not replaced, will be very disappointed. Will update with my case later. There is an update. ZINUS agreed to replace the bed frame after sending them an email with purchase invoice and pictures of where it broke. The bed frame arrived today. I am very satisfied with their service. I will not buy a new bed frame from them again. Thanks ZINUS!
👤This was purchased in the spring of 2016 It was great for a while, but at the end of 2016 it started to fall apart. I don't have sex in the bed, I just hang out or sleep in it, and I don't jump or flop on it. The bars started to fall off of the little metal lips. There was nothing to hold up the bars after they snapped off. I have had to duct tape it several times. It is sinking in the middle. I will have to tape it up once a week at a bar. The bed frame is not good. I would rather sleep on the floor.
👤The bed frame is ok for basic use. There are 2 negative comments I have. You can feel the steel rod when you sit on the bed, because the frame is 6 inches wide. I bought a foam mattress. When the weight is distributed, it's ok to lie flat. I am going to put a support on it. If you are not careful, the corner will hit your leg. My leg was injured. This reminds me to put something down. It is easy to assemble, does not rattle, supports my weight and serves my basic needs, I just added a board from Lowes that costs $7. It is better now.
The queen's outer dimensions are 87" L x 64" W and 51" H. It's easy to impersonate. No box spring required! Brand new, comes in two boxes. Brand new, comes in two boxes.
👤The bed is beautiful, but the description of being 51 inches tall is a total lie. The total height of the bed is only 45 inches. If it was only 1 inch off, I would be okay, but 6 inches off is not a mistake. It is a lie to get buyers to buy.
👤My fiancée and I bought a bed for our apartment. It was in 2 different boxes. If you have at least 2 people helping, it's really good for the price.
👤The title is 51. It looks like a child's bed because it is 45 degrees. The seller asked for pictures to be sent. There has been no response for several days.
👤This bed is short. I had a different bed in my cart before I bought this one because of the photo and the false advertising, but I wouldn't have bought it if I had known. It is at 3:37 AM. I am angry. The headboard has been found to have BED BUGS. D O N O T ORDER FROM HERE. The bed was filthy and dusty when I received it. It passed over my head and I thought it was from shipping. I have never had a child like a 1 year old boy. I had a bed bug. There are bugs in between the circles. I have seen 3 large ones and one small one. I put the bed together on my mattress. I had it tonight. I fully inspected the bed after finding another on my cover. I was disgusted by the fact that they are all in the same place, so I inspected the back as well. I have a lot of photos. This is completely baffling. I have to buy a new mattress and have a professional come out to fix it.
👤The bed has exceeded my expectations. I was skeptical about buying a bed online. It arrived 2 days after it was ordered. It was packaged well and there was no damage. The directions were easy to follow. I used a power drill to assemble it in less than two hours. It's nice and quiet. I ordered the Oliver Smith 10in pillow top memory foam mattress after I was so pleased with this bed. For anyone interested. You should buy this bed.
👤I love this bed. It took about a week to get it. It was easy to put it together. The wood slats are still sturdy even though I didn't screw them down. The bed frame is great. This purchase was very happy with.
👤The bed is great looking. You should buy it for yourself, paint your bedroom black, and draw a pentagram under your bed, so you can work magick all night long when you're not around. There is a powerful force in the universe that can't be stopped. Purchase the bed and put the romance in necromancy.
👤I like the bed a lot. That is shorter than it says on the description. It is only 47” tall. It looks like it should be 60. I don't retur it only because it's asabled and I don't want to go true the hassle again, but here and everywhere.
The queen's outer dimensions are 89" L x 69" W and 51" H. There is a fabric pillowcase bed. It's easy to impersonate. No box spring required! Brand new, comes in two boxes. Black Velour is high quality. Ships in several boxes. Ships in several boxes.
👤Love is love. It looks better in person. Pictures don't do justice. I have the black queen. It's easy to put together. I didn't have enough bolts, I didn't know if I lost them or if they didn't send enough. I made it work. You will need a power drill to drill in the FWI. The velvet is easy to clean. It is not too high or low to the ground. At the same time, it is sexy. I love it! I ordered it on July 13 and it arrived on July 16. 3 damn days. FedEx left it at my door. I love this bed. Will update later.
👤A quality bed frame costs $308. I bought the king. The velour makes it feel very fancy. Buy this bed. I bought it on Tuesday and it was supposed to be delivered the next day. It was very easy to put it together. It took about an hour. It would take 30 minutes if someone helped.
👤Such high quality! It's easy to put together. I am small and short. The slats are screwed in with a drill instead of clicking. The whole thing is nearly 100 lbs and doesn't budge when I shake it. Absolutely worth the money. I have had the bed for two months now and I am very happy. The mattress does not move. Great support.
👤The box was terrible from the moment we opened it. There are burns in the upholstery. We had already given away the old bed so we were going to just deal with it because I couldn't drag the box to ups. The slats and the foot board were missing. It looks like we were sent a used bed. We have nothing to sleep on and I have to take off work and meet ups to get my refund on this. It's not a good look.
👤The bed is a great deal. It took two hours for us to put it together. Instructions are relatively clear. The quality is amazing for the price. Definitely recommend.
👤The bed was easy to put together, but the leg on the footboard was broken. It seems sturdy, even though he put it together regardless. Will only contact the seller if my husband is angry that it was broken. He took it to daughter's condo. It was broken. He said he hopes it stays together. It seems to be a sturdy bed, it has a nice feel, it looks good, and all. You should check all the parts before putting them together. Who wants to take it to the post office to return it? It's a pity.
👤If you want to put together a project that looks good, you should use a drill for the last part or you will be stuck with screws by hand for 30 minutes. Very strong as well.
👤I loved it! It is better than the picture. It is a velvet texture. It's a little difficult to assemble. I am not good with building stuff.
The product's dimensions are (L)79. 5 inches x 59. 5 inches x (H) 12 inches/ delivered in smart compact packaging The low profile design has corners. Required tools are included and assembled in minutes. Queen platform bed frame with steel slat mattress foundation is all you need. Heavy duty steel construction is noise free and stable.
👤I have slept with a mattress on the floor for the majority of the past seven years after three bad experiences with bed frames from Ikea, one of which snapped when I sat on it. Most frames can't handle the weight of a single body of this mass plus the weight of a mattress due to stress points and poor manufacturing. I waited a couple of months to give feedback on this piece, and I can tell you that this frame is the one. 1) There is no sound. There are two more The weight distribution is amazing because the foundation is supported with welding. There are 3 more The middle bar and legs have not cracked, bent, or warped, and at the 30-day mark when I removed the mattress to tighten up the bolts for preventive maintenance, they had hardly loosened at all, indicating very little frame motion impact with my body weight. I live with a disability that is kicking my a** due to balance and coordination issues, and even as my weight continues to go down, the ability to get in and out of bed is easier and safer. It is so much better to leave physical therapy and go to bed higher off the floor than it is to have to worry about something snapping. Don't hesitate. It looks good, too.
👤The metal platform bed was put together. My mattress was on the ground. We couldn't agree on what type of frame we wanted, but he made it clear he wanted something very sturdy and Metal. When you first open the box, realize how strong it is. The materials were heavy. It took about an hour and a half to put it together. If you know how to count, the instructions are very easy. Ikea has their instructions, so it won't drive you crazy. The bed doesn't slide around because of sticky tape in the middle slots, but it does mean that you have to be precise with how you place the mattress on the frame. It's perfect for a person with bad knees. It looks like there is enough room underneath to hold a small amount of storage even though the frame is not going to be used for that. This will be the first night sleeping on the bed frame and I will review it later. So far, I'm very satisfied. I would have done 5 stars, but I want to see how it goes. So far, the frame is loving it. Even with some accidents, it held up well. This frame is a 4 out of 5. The only thing that is disappointing is that minor squeaking. If I tighten the bits and remove the bed, it would be fine. I don't see any major issues when I just move around the bed to sleep.
👤Needed a new frame and this looked good. Its strongest points are 1. It's superbly engineered. The platform for most likely any bed is designed by an expert. 2. It fits most King beds. On the up side: 1. Be careful when finishing. There are 4 slats that have two sided tape. Only the top tape must be torn off. This fact should be made clear. The tape came off after we pulled it off. We realized there were two tapes. That is the only flaw in the design. 2. This is a launch pad. That means you have a lot of work. The numbered pieces help with the installation of 36 bolts. If two people do the work, it's time consuming and helps. 3. It is heavy. It is a metal system that is well manufactured and engineerd. 4. No surprise. Don't try to push your vac under the bed. 5. Place it where you want it. It is not a mean task to move it about. The design ensures a stable platform with no movement. 6. The bed is very firm. The cross bars are the same thickness of plywood as the bottom frame. You may want to rethink this if you like a less firm bed. Will try to remove the slats. 7. The bed has become rock solid after two weeks. We will try to return it. This is the best structure for you. If you have become accustomed to a less firm structure, this may be disappointing. It is a shame because it seems well built. There are 8. It seems to me that if you want to return it, you are out of luck. You should be certain that you want this sight to be unseen because it is yours. Ours is going to a charity. Hopefully someone will use it. It is almost 90 pounds.
It was inspired by classic mid-century modern design. The acorn colored hardwood frame hints at subtle refinement. It's available in Queen or King. Sturdy frame construction is designed to last. The mattress and box spring are not included. The mattress and box spring are not included.
👤The Easmor on Wayfair has the same bed as this one. It's $100 cheaper. The bed is of good quality. I think I need to tighten the bolts after a while because it creaks a bit. The bed feels very stable and solid after I added some non-slip casters to the legs. I was able to assemble this bed by myself. It is heavy, and the boxes are heavy, but I carried it in pieces. The seller offered my 10% back in lieu of a return, even though it was slightly damaged. I accepted. I didn't want to go through the hassle of returning it because of the minor damage on the bed rail.
👤I like the look of the bed, but it has a couple unexpected issues. 1. The bolts that attach the posts are visible. I would have expected them to have a decorative plug to hide the hardware. I didn't recall seeing this in the photographs before buying the bed, but I can see them now. I will try to find a way to cover them. 2. The platform frame was installed upside down due to the lack of details on the piece. I had to disassemble the entire bed in order to fix it because the center slat support brace was at an angle. A simple sticker to mark this side up would have been helpful. 3. I need to find the appropriate glides or pads for the bottoms of the legs because the bed slides easily across my hardwood floors. You will need assistance putting the bed together.
👤I loved the West elm bed, but decided to save some money. Within 4 days, the two boxes arrived. The veneer on the bed can easily be scratched. The bed had pre marked screw holes. Before attaching brackets to the bed, make sure the feet on the middle beams are not touching the floor. I had to level the holes again because the feet on the beams did not touch the floor. The bed is beautiful but we don't want to build it for the price we paid. Customer service was helpful. As well, Crosley was helpful. There is a Also! I couldn't find a place that could tell me the measurement from floor to rail height. It fits the zip ikea storage containers nicely.
👤I wouldn't recommend this. I was hoping for something similar to the West elm version, but it's not there. The wood is more orange than the picture shows, and the design makes it look like a closet door from the 70s. None of the pictures show this. The wood is sturdy.
👤The bed was in two large packages. The bed I bought is sturdy and looks great, but I like the color of it the most. The bed was AWFUL. Be warned. I had to get some custom cut hardware for my bed because the hardware that it comes with doesn't work for it, and there were 6 trash bags in the packaging which I am still cleaning out of my apartment. The side panels are an inch too short for the head and foot boards to attach to, so there are headless screws that attach the boards to the side panels. After spending two days trying to build a bed, I went to the hardware store twice and got them cut to the correct length. The middle support does not touch the ground. I figured with the weight of the mattress. Hopefully, it would be okay. The holes to attach the center beam to the head/foot boards do not line up with the hardware, and the center legs don't touch the ground, so they are not even in the right place. I'm hoping this isn't an issue over time, but I decided to ignore it because I was so exhausted from dealing with it. The bed was 3.5 stars due to the construction issues. I am happy that it was exactly what I was looking for.
The bed has a ribbed tufted headboard and a robust wood frame. Side rails and additional center legs are included. The drawers lock into place. It is perfect for your master, guest or teen bedroom. The slats adapt to the pressure exerted on them. There is no need for a box spring or foundation. Assembly is quick and easy. There are two boxes. There are three sizes available: Full, Queen and King. A limited warranty. Product dimensions The weight limit is 500 lbs. The net weight was 138.6 lbs. Box 1 is 80”L x 38”W x 4”H. Box 2 has a gross weight of 101 lbs.
👤I thought the mattress would sit in the frame, but it doesn't. There are gaps in the corners of my mattress. I was able to cover it with a bedspread. If you don't have an 8 inch mattress, you will have a tiny one. The blue linen I ordered looked like denim. I am so disappointed. I was hoping for a different look. I debated many different bed frames for months and finally decided on this one. I wish I had not. It was easy for me and my sister to put it together. It feels very sturdy after a night of sleep. I wish I liked it more.
👤I will be honest. The buyers are remorse is real. Everyone needs to know that this bed is not gray. At all. Not a lot. The bed is white. That was disappointing. The color is going to get filthy very quickly. The front of drawers are missing from the second issue. $400 bucks and the bed isn't complete. The drawers are made of plastic. The bed's back is not as tall as it appears. It is barely a day when the mattress is in. Wait, it gets better. Three large paper tags are put to the back of the bed. You have to thread by threat to cut off the fabric. I would send it back if it took less than 2 hours to assemble. The bed is $200. I am very disappointed.
👤It looks great. I wanted a mid century vibe. It is true to what I expected. A moss green. The quality is good. The box arrived without instructions or protectors for the floor. The flow to put this together is odd. When you are almost done with putting the legs on, you need two people to do it. I thought we were going to have the bed fall through the floor on the first night. It has been a while. It still creaks, but not as much. I thought it would be on the floor. The side tables are higher than it. We have a short mattress. The brass birds need to be up above the bed to finish the look on the wall.
👤The installation and putting together of this thing is a huge pain, and one wrong move can cause serious damage. Be careful. The slates are difficult to put together. I would spend more for something easier to put together with a higher placed back, as the bed is a decent looking one. The package arrived on time. If this was my main bed, I would send this back because the pictured product looked higher in the picture.
👤I thought the review would come later. One of the slats broke within 2 months of owning the bed. I did not assemble it wrong. The slats are in the correct orientation. My husband is very heavy. People are not jumping on the bed. An Ikea bed which is cheaper would last longer than 2 months, and they have a better return policy. I liked the style of the bed and didn't think much of the price. It is a cheap bed. The bed is not a full length beam. It is sections which are bolted together with metal parts. They added metal legs to make it stable. The slats that support the mattress are so thin and cheap that you can brake them with a karate chop. I'm stuck past my return window. I might post an update if I call the manufacturer. If you are buying a bed for display purposes, go for it. It looks like the versions that cost more. Be prepared to spend more money to make it last.
Queen platform bed frame with drawers products from South Shore. In this article about queen platform bed frame with drawers you can see why people choose the product. Home Styles and Olee Sleep are also good brands to look for when you are finding queen platform bed frame with drawers.
South Shore, Home Styles and Olee Sleep are some of the best brands that chosen by people for queen platform bed frame with drawers. Find the detail in this article. Home Life, Atlantic Furniture and Zinus are also brands that their products are worth to check.