loft design opens up floor space It's ideal for low ceilings. Solid New Zealand pine wood bed frame is superior quality. The finish is non-toxic. The bed's 400 lbs weight capacity safely holds kids and adults. Adding wood slats and metal support bar adds reinforcement. The total footprint is 81.5" L x 59.5" W x 68.5" H. Matching hardware for all colors is part of modern design. The ladder can be put on the left or right during assembly.
👤Thoroughly pleased! My baby boy loves his new bed. The bed came in two boxes, one around 150 lbs and the other around 30 lbs. I bought the clay. The DONCO Kids Low Study Loft Bed, Dark Cappuccino is a good choice for a few reasons. I took wine breaks. The desk took 20 minutes to install. Everything else I did on my own, including connecting side rails, only needed help from someone. It took some time for all the hardware and wood to be accounted for. The instructions are very easy to understand. Two issues were encountered by me. I had to swap pieces 19&20 as they were backwards. I didn't want to damage the desk or the corner screws, so I didn't add one of them. It's pretty sturdy. I didn't secure all of the wood slats on the bed frame because it was in a temporary location. The corner brackets for the desk are solid and can be done without. I chose a 8inch mattress, but it thinks you could get away with a 10inch. The order from the wood/paint has dissipated in the past 24 hours. There was no real damage to the wood, just a small nick on one of the shelves and one side of the desk was discolored. He will put a sheet over the front so he can still have a secret cave to play in, but this is a great buy. I would suggest this bed. I was hesitant to buy as it had not been reviewed.
👤I bought a loft bed for my 7 year old because he wanted one so badly. I bought this one because... The guardrail of the bed is higher than other products. 2. The middle of tall loft and low loft gives the bed a high enough space for a play area. 3. I found 3 pieces of parts that were broken on delivery, but Amazon replaced them right away. It is easy to assemble with two adults. It looks nice. Even when my baby goes up and moves the entire bed. It is not that we didn't tighten screws, it's the structural issue. I need to find a way to bolt it to the wall. I wouldn't have bought it if I knew this.
👤It is easy to assemble.
👤For Christmas, we bought this bed for our daughter. The bed is easy to assemble. It did not hold up to normal use. My little girl fell when the step gave out. I think you get what you pay for, but I think I should have gotten more for what I paid. It was very disappointing. I don't think I would buy again. I have a few days left to return it. It is not doable. I had to disassemble the giant bed in order to get her old bed back. We don't know how we are going to fix it. I guess I have to think of something.
👤The loft bed is very nice. It was easy to assemble, but needs two people. The wood is good and does not pose a risk of falling apart or collapsing. I was looking for something that could hold an adult and a child. This was the limit. It will not come crashing down if we climb up with our kid. It doesn't need to be anchored to the wall nor does it need to shake when you move, but it does shake a little when you are on it. The shelves are nice. The shelves and ladder can be put on either side. You have to make that decision when you build it. There are shelves on the right and a ladder on the left. If you want it that way, you can put the ladder and shelves on the same side. The twin mattress we bought was too thick. We got an 8” mattress after returning. I wouldn't recommend anything more than 8. We are happy with the purchase.
The wood frame is not meant for use with a mattress. Product dimensions are 74.5” L x 53.5” W x 12” H. The weight limit is 500 lbs. The side rails on the bed frames are thicker than the ones on the standard frames, making them compatible with people who need more weight support. Non-slip tape on the wooden slats prevents your mattress from moving, and foam padded tape is added to the steel frame for noise-free use. Easy to assemble and no box spring is needed. The location is recommended indoors.
👤The beams broke. The beams are made of smaller pieces of wood.
👤Don't buy! The platform doesn't meet the requirements of many bedding manufacturers. The slats are more than 3 inches apart. The product doesn't meet its intended purpose and according to the manufacturer of my mattress and a large retail chain in New England the product doesn't adequately support a mattress without additional support and it's use will void your warranty. I spent a lot of time researching to find the right product and from the picture it looked like the slats were close enough, but they are not. It is well made, contrary to some reviews. The people who complain about the center posts bending are most likely moving the bed without lifting it. The worst part of it all is that Zinus's customer support is the worst. I asked if they could send me without charge or even charge me for additional slats. After a month of phone calls where I was told they would send slats, I finally got an out right refusal to send me or sell extra slats. Amazon should investigate this on their own and pull the product or advise buyers that they will need to do additional work on this product once they receive it to bring it to minimum standards. There is an update. See the response from the customer service company. They are horrible. Their answer was either ignorant or a lie. You are the judge. They were given a chance to respond to their claim before I wrote this. The measurement you see is correct because the system is very controlled and can not be messed with. I would not be writing this if it was 3. The angle of the picture makes a difference. The distance between each slats contact point is just over three feet, but this photo shows that their claim is incorrect.
👤The slats on this unit are attached to each other on a strip of velcro. I contacted Zinus to make sure I could buy more slats to keep the frame together. I am buying a very heavy latex mattress and it is recommended. I was told that I could purchase additional slats. I invested in the frame and latex mattress based on that guarantee. I was told I could buy them from an outside source, such as slats. Lowes, Home Depot, or your local hardware store. Say what? The slats are made from1/4" thick solid wood with a tape that affixes to the bed frame. Local stores don't sell these. It is possible to cut down a small piece of plywood. They told me that it would be illegal to sell them to me as they don't have a price for them. They should be sent to me for free as they broke their promise. After several emails and dropping the CEO's name, another rep apologized and offered to send them for free. That was great news, until I received them. The new slats were shorter than the old ones. They wouldn't span the width of the bed. They fall out if you see the picture. I can't believe they have a poor quality control system. Customer service will no longer acknowledge me after I asked for a response twice. If you want to take your chances with properly manufactured slats, this may be for you. I would not recommend this company's products or customer service.
If you prefer a clean, simplistic look in the bedroom, it doesn't mean you have to sacrifice durability; the steel Trisha platform bed supports your mattress without stealing focus. 7-inch platform height is perfect for taller mattresses or for those who prefer their bed lower to the ground; twin size supports a maximum weight capacity of 350 lbs, while all other sizes can support up to 700 lbs. Reliable wood slats are designed to support and extend the life of your latex, memory foam or spring mattress without the need for a box spring. It is easy to assemble, all parts, tools, and instructions are shipped straight to your door in one efficiently packed box, and set-up takes less than an hour with a friend's help. The mattress is sold separately. The mattress is sold separately.
👤If you have a lot of tools, easy assembly takes about 30 min. The geometry was perfect, and it was surprisingly made. Instructions were easy to understand and the packaging was protected.
👤I have had it for almost 2 years and no problems. Frame has been able to store many boxes underneath with no problem. If you have a robotic vacuum and oversized top sheets, you'll need to pick the corners of the comforter/sheets from the floor so the Roomba doesn't get stuck. So far, so good! A great bed frame. It allows our little 10 lbs pomeranian to jump on and off the bed as she pleases throughout the night, and it eliminates our worry of her falling off the bed. Our bed frame is a low platform one and allows our Roomba under it. The assembly took less than an hour and included unpacking and cleaning up packaging. All parts have step numbers on them and are easy to assemble. If the bed frame doesn't hold up our weight, we may need to update the mattress with a new one.
👤The frame makes a squeaking sound when it's been a month. The bed will cause squeaks, non-stop squeaks, but so far there are no squeaks during sleep or moderate movements. I don't understand why the bed is squeaking since it has never been under more than 200 lbs. This is not half of the bed frame's maximum capacity. The bed has never been jumped on or abused and I assembled it correctly, it's simple as can be. I decided to keep the bed and try to repair it. I'll use Loctite Thread Locker to reset the bolts. I might use candle wax to coat the surface area in each of the corners where the frame bolts together and at the same time there is a 2 inch metal overlap of the interlocking frame pieces. The rubber washers could help prevent the bolt's head from squeaking. I'm prepared to replace the bolts with self-tapping screw-in bolts for a tighter fit. The last resort would be to have the frame welded into one piece and do away with the bolts. I believe I'll get a quiet bed, which is what my old wood-framed box spring bed provided when it was elevated by hidden concrete blocks instead of using a conventional bed frame, and I always attach my bed head board to the wall to prevent it from squeaking. I like a platform bed without a box spring, and I found out about it with this steel bed frame. It gives a lot of support. I'm going to try to make it work, but I can't recommend this frame because of its moderate squeaks.
👤The bed is good for the price. The frame is lightweight and has a clean look. I am really pleased. The wooden slats were held in place with the help of the Velcro tape. The wooden slats are lined with sticky tape to help keep your mattress in place. 30 minutes was the time it took to unpack and assemble. The instructions were easy to follow and the parts were clearly labeled. The fabrication was a bit off. The support posts under the center beam were removed 1/3” from the floor once the frame was assembled, causing the beam to bow slightly once weight was set onto the frame. The side beams and footer didn't align well on all four corners, which put additional tension on the bolts. I tried to get the bolt in with the allen wrench, but it was too weak. There are better beds out there. Not at this price.
Sturdy and durable steel. If you want to upgrade your bed frame and box spring, you can do so with this simple-to-build and easy-to-maneuver mattress foundation. The design is made of durable steel and has multiple points of contact with the floor and plastic caps to protect it. All sizes of mattress can be rest on top of the steel slatted platform, but narrow twin, twin and twin XL sizes can support up to 750 lbs. It takes less than an hour to setup with all the tools, parts and instructions packed into one Compack shipping box. The mattress is sold separately.
👤I used brackets to hold my mattress in place. Attached is a picture.
👤The welds on the middle section have separated in 3 different places. Poor quality of frame really disappointed me. The company did not respond to warranty requests by February of this year. There are a lot of comments to the negative reviews of the company stating that there is a 5 year warrant and email and phone number. I have not received a response from the company to my original review. The customer support email address does not respond to email when the 800 number goes straight to voicemail.
👤I love this bed frame. The mattress sliding was one of the reviews I saw. I added hot glue to the slats to give them some grip, instead of putting the mattress on them. Works well.
👤I bought this for my nephew. His mom called me last night and said the frame broke. The description makes these seem to be impervious. I asked my sister how it broke, and she said he sat on one end to put on his shoes and it broke. My nephew is a teen who is around 120 lbs, so he wasn't the issue. The beds are covered for 5 years if the damage was caused by faulty manufacturing. Will wait to see what happens. If the bed frame is not replaced, will be very disappointed. Will update with my case later. There is an update. ZINUS agreed to replace the bed frame after sending them an email with purchase invoice and pictures of where it broke. The bed frame arrived today. I am very satisfied with their service. I will not buy a new bed frame from them again. Thanks ZINUS!
👤This was purchased in the spring of 2016 It was great for a while, but at the end of 2016 it started to fall apart. I don't have sex in the bed, I just hang out or sleep in it, and I don't jump or flop on it. The bars started to fall off of the little metal lips. There was nothing to hold up the bars after they snapped off. I have had to duct tape it several times. It is sinking in the middle. I will have to tape it up once a week at a bar. The bed frame is not good. I would rather sleep on the floor.
👤The bed frame is ok for basic use. There are 2 negative comments I have. You can feel the steel rod when you sit on the bed, because the frame is 6 inches wide. I bought a foam mattress. When the weight is distributed, it's ok to lie flat. I am going to put a support on it. If you are not careful, the corner will hit your leg. My leg was injured. This reminds me to put something down. It is easy to assemble, does not rattle, supports my weight and serves my basic needs, I just added a board from Lowes that costs $7. It is better now.
The frame surrounds the mattress to prevent it from slipping. All the required hardware and tools are included. The dimensions are 56. 38 x 77 38 x 14 25 inches. The mattress and box dimensions are 53 x 74 x 5 inches. Fast furniture delivery and a limited manufacturer warranty.
👤The wood looks great, it is solid as a rock. We put a 200lb purple mattress on top. I slept on top of 11 legs. I broke my toe on one of the side legs and took one star off. That has nothing to do with the quality and I am upset about it.
👤The bed frame is cute and affordable, but it is not comfortable. I didn't need to purchase a box spring because I bought a new mattress and bed frame. There is a clear line in the middle of the mattress where the bed frame center beam is and the sides where my partner and I sleep. I wake up with sore hips and back. The mattress was taken off the bed frame and put on the floor. We slept this way for a couple of months and I didn't have any pain. If I buy a box spring for this bed, it will be so high off the ground that I will have to jump to get onto it, so I will be buying a new bed frame. The screws were so loose that the legs were about to fall off when it was pushed back up against the wall.
👤The bed frame I have had for a month is already falling apart. The screws and washers are not secure. The legs are wobbly. It seemed great at first, but after a month it's worthless. I need to buy a new bed frame. The buyer should beware.
👤I am very pleased with the bed frames I ordered. They are made of real wood and look like the pictures. I haven't found the right one. I put sliders under all nine legs to be able to move it around since they are very heavy after assembly. Customer service was able to get the washers out to us.
👤Very happy with the purchase! The box was pretty beat up. I was a little worried at first. Everything was undamaged due to correct packaging. The bed was easy to build and the parts are of good quality. I was pleasantly surprised.
👤The frame was put together without the hardware. I have tried calling the manufacturers phone numbers several times and left call back messages, but no reply from the manufacturer. It was very frustrating. I was able to purchase some from Amazon after I received a parcel payment. I don't know how to measure and fit brackets and bolts. I took the refund to make sure I got something for my money, but I was disappointed that the manufacturers avoided my purchase and the importance of missing pieces. I have a box of bed frame pieces lying in my bedroom floor that I have no use for. It was disappointing that the manufacturers warranty or instructions manual was not included. I was going to get my bed off the floor and I thought I could afford it. It's a good thing!
👤It was easy to drag the box from the front door to the bedroom by myself, because it was in a long narrow box. The instructions were easy to follow and everything fit together. I am confident in it's strength. I have cement floors in my bedroom. I would recommend placing a rug underneath the bed since most floors are flat all the way across. I put some cardboard under the legs of the bed in case the floor wasn't completely flat. I didn't want to put too much pressure on any single point. When you push against the bed, the frame slides on the floor, but it's not the fault of the bed, it's the fault of being placed on a cement floor. A rug or felt pads would probably fix that problem for me. It's unfair to give a product negative reviews because something might not work for me. I think some reviewers would give a negative review because the bed slides on cement flooring, but that is not the fault of the bed. I think this bed is very strong. I bought a bunky board to go in the opposite direction of the slats.
A modern design with clean lines is covered in linen. There are four drawers that lock in place. There is no need for a box spring or additional foundation in the bicyle slat support system. The center legs and metal side rails provide additional support. It is assembled quickly and ships in one box. The queen bed has a weight limit of 500 lbs. The drawer is 35"L x 23.5"W x 6.5"H. The shipping dimensions are 64"L x 39"W x6"H. The net weight was 113.5 lbs. The box weight is 127 lbs.
👤Think again if you think you found a diamond. You get what you pay for with this bed. The drawers are made of plastic. The drawers are not attached to the bed, so they float around. The upholstery is not done well. It is just bad. It looks worse than ikea. I would buy ikea over this for the same price.
👤The bed is great for the price. The bed is lightly padded. The bed is made of metal and bolts. The slats are secured with plastic and break easily. If you install them correctly and don't try to pull them out of the frame, then they are fine. Most beds have slats that aren't secured. The drawers are covered with a metal frame and a fabric drawer front that matches the head and footboard. The drawer is not on a track, but it has a bolt that slides into a hole on the side rail of the bed and secures it in place. I have provided some pictures. The reviews on the drawers almost convinced me to not buy this bed. The drawers will be used for clothing and should hold up well if used correctly. The max is 40 lbs per drawer. I wouldn't push it too far. I bought another bed because I was very pleased with this one.
👤The photos were damaged during the unpacking. The box it was in was undamaged. It is disappointing that the tear in the fabric is visible when built. The bed is a nice addition to our guest room and the color allows for many different room designs.
👤I needed help moving the box, but once opened, one person could do it. I bought the storage and the look. Roll out the drawers for easy access. They hold a lot more than I expected. I wanted a higher bed so I bought a pillow top mattress. I can use my King size sheets under the mattress, which is an unexpected plus. I was very pleased with the bed.
👤I like the color of the bed, but I was disappointed that the slats held the mattress up. Four of the plastic caps which attach the slats were broken, and the slats themselves are not finished, meaning another layer between them and the mattress. The drawers are flimsy, clear plastic over metal frames. It's serving it's purpose for the time being, and I appreciated the shipment of extra hardware for construction, but I was a bit disappointed.
👤I love this bed frame. I was able to get the boxes into my place by myself, but I had to think outside of the box. The frame was easy to put together, it took us about an hour. It was missing some parts, but they were replaced quickly. The bed is sturdy and does not make a nose when moving around on it. I made this purchase on Wayfair and thought I'd leave a review here as well.
👤The bed is exactly what it is in the picture. Put it together. The instructions were clear. It would be difficult to make a mistake. It took me three hours to put it together. It's not hard to put together. There is no reason to fear putting this piece of furniture together.
The Particleboard is laminated. Clean and low productivity lines. The traditional mates bed has smooth lines, 2 large drawers, and rounded edges. Useful storage: The drawers on the side of the bed are ideal for storing and organizing items in the unused space under the bed. No box spring is required. This bed is economical and charming, and you can place your mattress on top of the frame. The bed is made in North America with non-toxic laminated particleboard, which complies with all North American safety standards. 5-year limited warranty They stand behind this bed with drawers and a full 5-year limited warranty. It's necessary for assembly to be required. A queen size bed can hold 500 pounds. Ships in several boxes.
👤It has been a few years. I have had this bed for over two years and it holds up well. I sleep on it every night because it has undergone a lot of use and abuse. I'm 200 lbs. My 300lb friend has slept on it a few times, and for the most part, it has not been a problem. The only problem I have had with this bed is that the wood boards that go under the mattress started to break and fall where I sleep the most. I flipped them and it was a good fix for a while, but eventually it snapped and left my mattress sagging. I went to Home Depot with a good board in hand, measured it up, and got some plywood cut to the same dimensions for cheap, and shouldn't have a problem again.
👤When the bed was delivered, I questioned if it was just one box. The driver told me twice that there was nothing else. I could not build this bed with just a few pieces because it was too large. They helped me quickly order another bed. On the day after, it was discovered that another box was left on the truck and was to be delivered that day. I had to refuse delivery once the 2nd bed arrived 3 days later because I had to cancel the reorder. I put together the bed by myself, since I already put together the matching headboard. My daughter lives too far away to get the power screwdriver back, so I lent it to her, even though it was not needed for the bed. I didn't know that the muscles of my body were hurting after fastening many long screws. The instructions were easy to understand, but I still wish that a written explanation was available. The rails for the drawers on the bed frame were the most difficult issue to resolve. It was hard to see which way they were going. I love this bed. It is sturdy and in perfect order. I was surprised that there were no holes on the bed to attach the headboard. I decided to leave it alone since the bed is very heavy and I have a corner place.
👤I figured it out 3 hours after I saw the instructions, which only show black and white pictures. I was a little worried about missing nails or a huge chip on the parts, but overall I was very impressed with how sturdy and neat this look was. Since my bed is finished, I don't see where the chip part is, so I only saw 2 tiny chips that are not that big. It doesn't feel like it will break apart after sitting in it. I would buy another one of the bad reviews if I could.
👤I assumed that the quality of the bed was not great because it was easy to assemble. The bed is like putting your mattress on the floor, because it doesn't have the support for it. This is a cheap bed. I was surprised that for the price, I didn't see the same quality as Ikea, but since I was not able to find stock in my area, I decided to go with this one. I was a bit disappointed.
Product dimensions are 75" L x 54" W x 14" H. It is designed for people who weigh up to 250 pounds. The platform bed frame has a supportive foundation for a mattress. There was no box spring needed. The frame is easy to store and move in tight spaces with the folding mechanism. Extra under-the-bed storage space with a vertical clearance of 13 inches is provided. Extra under-the-bed storage space with a vertical clearance of 13 inches is provided.
👤The basics platform of Amazon is doing it's job but has a design flaw. The edges of the rods should be covered with a smooth surface. I put my new mattress on this platform. It ripped off my new mattress at all the sharp edges, voiding my warranty. If you place smooth cloth over the platform to save your mattress, please think of this scenario. I also bought a mattress cover. I placed the mattress to see if it fits. It ripped off my mattress.
👤I was surprised that the bed frame was as cheap as it was, but I am pleasantly surprised that it is holding up. I bought this to go with my new King sized memory foam mattress, I am 120 lbs and my boyfriend is 170 lbs, and we have had no problems with our sleep. I have not experienced any creaking in the bed or the frame. I was able to carry it by myself down the stairs to the bedroom because it was a bit heavy. My younger brother helped me set it up. He helped me pull the thing out of the box and cut some zip ties, but I could have done it myself. It is very easy to pull out the box and unfold the frame, you just need to snap some corners together. If this helped you, please give it a thumbs up, I am trying to get better at writing reviews.
👤I have a deep cut on my thumb when I pulled the bed frame out of the box, there is a sharp metal jutting from the rounded corner where you grab it to pull it out. More people can get serious injuries from this if the product is not better. I wanted to post a picture of my thumb but decided against it because Amazon might not post my review.
👤I've never said this before, but Amazon finally got something right with one of their products. I was expecting short posts after reading reviews. It took me more time to get the package in my house and unpack than it did to assemble the frame and make my bed. It was simple to unfold four auto-locking legs and then use two bolts and two odd little spacers to secure the frame pieces together. I was able to throw my box spring. The bed is tall. Without a box spring, the top of my mattress is above the window I sleep next to. I suppose I could get out a measuring tape, but it would take a lot of effort. Ignore the fact that this only supports sleepers up to 240 pounds. That should have been more than 2200 pounds. I am a fat boy and this thing doesn't move or groan.
👤It's easy to set up but there are two issues to be aware of. My full size mattress slipped because there was no lip to hold it in place. My queen size is heavy and has a soft bottom. The side legs are only half an inch and you'll kick them into bed if you do that nightly. I wrapped the legs in bubble wrap. I still kick them, but it doesn't hurt. I made corner "collars" that are the size and shape of the plastic corner protectors found on standard box springs to keep the full size mattress in place. The platform bed had holes for the headboard. If the manufacturer included foam tubes and snap on plastic collars, they would get five stars. They get three. I get the other two.
Strong wood slat mattress support. The mattress and frame are sold separately. The frame is made of black faux leather. It is available in Queen, King. There is a 5 year limited warranty.
👤Whoever came up with the idea of "contents inside the headboard" is a legend. The idea for the slats is a legend. The faux cow is a hero. Great bed, will buy it again.
👤Shipping was fast. I received it two days after it was shipped. I got my new mattress the same day. Simple instructions. There were extra plastic pieces. The platform bed has wooden slats and plastic pieces, but it's cheaper than the wooden slats held on with the plastic pieces. The material is faux leather, but it's still beautiful and simple to look for on a budget. I wanted a bed that looked good and felt good without the price. It took 2 1/2 hours to put it all together. If you are bringing it upstairs, you should use a team lift. The packaging is heavy. I pushed it to the room after Fed Ex helped me bring it inside. I put it together myself. Can be done. The hexagonal tool is all that is needed. It had a strange smell. My mattress did the same. I was expecting the smell of the mattress. Maybe they will both disappear in a few days. With the help of Febrez. Thank you for the beautiful product! I will add any updates later. Aug 28th is the date of the edit. Pictures for everyone. When I am ready to move, I only have to loosen the bolts and remove the headboard. The rest can stay together. It makes moving easy. I don't have to take the whole thing apart.
👤This is the only purchase I bought for my new apartment. $200 for a king size platform bed. Great! The thing is solid. I'm just going to say that it's important that you don't make any noises in the oven when you're making a muffin. Soft touch all around which I loved. It's flat if it looks like the headboard curves in the picture. The only thing that could be improved is the bed. It would be nice if the headboard were a few inches taller, as there isn't that much room above a single pillow. What do you think about the cheapest bed on the market? This thing is amazing. Happy!
👤I bought this for my child. He sleeps in the bed at 130 lbs. There was no rough housing. When we moved to vacuum, this fell apart. It is less than a year old. The slats fell out when the metal frame bent in the middle. Very disappointed.
👤The item is better quality than you would expect. I noticed the headboard was slightly warped after putting it together, not enough to go through the trouble of disassemble and return, but an imperfection. I reached out to them in hopes that they would send me a new bed. I didn't think they would. They didn't bother to reply to my email, so that bugs me. There was a small tear on the back side fabric of the bed, but that is against the wall, so it was not perfect. I would purchase again. I would suggest not destroying the carton until it is fully assembled and inspected.
Solid Pine Wood and Steel. The Suzanne Platform Bed is made with the finest quality materials and craftsmanship, and it's in a class all of its own. A strong steel frame is anchored with a support bar and extra middle legs to ensure ultimate stability and longevity; twin size can support up to 350 lbs, while all other sizes can support up to 700 lbs. The sturdy wooden slats are fastened to the frame with a box spring and are 2.95 inches apart. It's too early. There is an assembly. It will never happen. Everything you need for painless setup is packed into a single box and shipped straight to your door, with all the parts, tools and instructions included for easy assembly that takes less than an hour. The mattress is sold separately.
👤I was surprised that it got here in less time than I expected. I realized that it was impossible to assemble it because one of the pieces had been welded backwards so that one hole was on the wrong side. When I tried to call and get through to anyone, I was unsuccessful, so I sent an email and it took a week for them to reply asking for my order confirmation. I waited another week to get a response, telling us that we would have to contact Amazon. I decided to take matters into my own hands because I was sick of seeing it in pieces on the floor in my bedroom. I bought drill bits for metal and drilled a hole in it myself, instead of going through another customer service battle. You would never be able to see the hole because it is hidden. It looked like it was real and was a sturdy product for the price. Just pray that you get the correct pieces and that you don't have to deal with customer service.
👤This frame is really nice. This is a temporary solution until we move out of our apartment and buy a place. It would be decent enough to last a year or so, but didn't have high expectations for build quality or fit/finish. How good can a king size frame be? It's pretty great. I was struck by how large the box was. The metal components are solid and the wood panels are a decent size and thickness, so it weighed more than I expected. Yes, they're real wood. I was able to assemble the frame by myself in around half an hour, because the construction of the frame and how it screws together seems well engineered. It was not difficult for me to do it, even though I would have been even faster. The way it's built, you can disassemble it in a few bigger pieces, so it should be easy to move. The instructions are very clear and there are very little steps. The bed feels very solid after it is assembled. If you were wondering, vigorous activity doesn't cause the headboard to hit the wall. The footboard does not rise as high as it appears in the photos, which is a plus for me. We have a Tuft and Needle mattress with a memory foam top that is about level with the footboard. I don't like high footboards, so that's a win for me. We got a better bed frame than we expected, but we're not sure if we'll replace it any time soon. It looks nice and is sturdy. It has a mild industrial look without being overly trendy.
👤The frame looks nice once assembled. There was an issue with the one we ordered. The hole on one side did not line up because it was soldered/drilled wrong. We double and triple checked the directions, pictures, and brought in a few friends and family just to get other opinions, hoping someone would point out what we were doing wrong. The product we received was welded/drilled wrong and we were left with a frame that could not be put together. With a half assembled frame and torn up packaging, we didn't want to deal with a return, so we made our measurements, got out the metal drill bits, and drilled an additional hole where there should have been one. The frame is strong. I can't recommend them because they haven't heard from the company or been able to contact them about the bad unit.
The metal bed frame has a minimalist design. The dimensions are 74.5 x 53.5 x 9 inches. All hardware, tools, and instructions are included in the assembly package. The wooden slats have tape on them. There is no box spring required.
👤The FACTS are in a nut shell because most people don't like to read long reviews. The product is good. It is worth the cost. Sturdy as well as holding people. This product is very good and I would highly recommend it.
👤Sturdy metal slats. There are two things you can do to hold a 100lb mattress and a large group of people. The mattress doesn't move between slats. Good purchase. Good price.
👤Inexpensive, easy to put together by yourself, does not require any extra tools, lower than the traditional height, sturdy, high enough for under bed storage, value for money, edges are rounded. The paint chips are cheap and the hardware is easy to use. Make sure you are okay with the height. This piece is great until you look at it in a different light. It's a good deal.
👤A great bed frame. If you are an adult or a couple, this is the frame for you. It bolts together in less than an hour. If you want a box spring, it has many slats to hold it. It has a complete box structure so you don't have pressure points digging in the floor. It doesn't move. From top to bottom, it supports you. The price is right for what you get. I will pass it on after the delivery person warned me. It is heavy. The steel used to support an adult American couple and mattress is not light. The parts are light enough for one person to carry. It is over kill for babies, little children and teenage girls. There were no rollers either. I use felt strips on my hardwood.
👤Excellent choice for mattress. It is easy to assemble in less than 10 minutes. Absolutely recommend this one!
👤I had to assemble it in 15 minutes. Didn't need to look at the instructions. You won't need to do that because it's so easy. The frame is strong and light. It holds my bed and my cat. The bars sit on the inside of the frame and I'm worried about the little spots to break. We will see how it goes, but as of now it is perfect. I highly recommend this.
👤My toes were hit so bad that it was hard to walk. I was worried that the bed frame wouldn't fit my weight. I used three hours to assemble the frame because I was stuck pushing the metals into the right place. It fit perfectly.
👤I could have completed this on my own, because it was so easy to assemble and my roommate and I put it together quickly. I should have paid more attention to the dimensions, but it will fit my needs for the time being. It came in quickly and we don't have any concerns about it.
👤My boyfriend and I are both on the bigger side. It took both of us to build the initial frame, but only one person was needed after that. It feels very sturdy.
👤This is the perfect stress foundation for me. I am very happy with theRITE HEIGHT from the floor. I would change the product for everyone.
Platform bed wood full products from Max & Lily. In this article about platform bed wood full you can see why people choose the product. Zinus and Olee Sleep are also good brands to look for when you are finding platform bed wood full.
Max & Lily, Zinus and Olee Sleep are some of the best brands that chosen by people for platform bed wood full. Find the detail in this article. Novogratz, South Shore and Amazon Basics are also brands that their products are worth to check.