The extra support design makes the bed safer and firm. Faster and smarter delivery are possible if you minimize packaging. Sturdy design includes steel and wood construction, multiple points bed-legs, and widened wooden slats, which make the bed stronger and more stable. The bed frame foundation is free from squeaking and sliding, quiet noise-free, non-shake, and is protected from structural twisting. All hardware and tools included/Headboard compatible can be set up in minutes. 14 inches of storage space under the mattresses is allowed. 14 inches of storage space under the mattresses is allowed.
👤I spent a long time looking for a bed and reading reviews to find one that wouldn't fall apart. I was looking for something that wouldn't make a noise and also had space for storage beneath the bed. This bed is perfect. It was easy to put together. It is easy to move without ruining my floors, but it does not move around while you are on it. It was too tall to use a box spring with it, but with a normal mattress it feels even more comfortable. If you want something simple and affordable, I recommend this. My husband and daughter sleep on this.
👤It was the most horrible experience on Amazon yet. I got a frame that wasn't the one displayed. The screw holes didn't line up, it was almost like it was left over from the package, and once you put one screw in the other it was less than an inch off.
👤The frame is solid. The hardware and welds are strong. I bought this for my son. I had it up for about a week and so far it's been great. The frame supports his weight, and also provides 70 lbs of a plush mattress, which is excellent in quality. I was a little hesitant before ordering because of what another reviewer had said. I don't think they're made of hardwood, but I think they'll last if you don't use the bed as a wrestling ring. They are 314 inch long and 12 inch thick. They have some flexibility, but won't break the way the weight is distributed. Some websites say that the slats should not be more than 3 inches apart. I will attest that the slats seem to be supporting the mattress without issue, because they are placed 4 inches apart. I think I can always get more slats made, but I don't think it will happen. If the situation gets worse, you can always put a bunkie board between the frame and the mattress, but it seems to support the mattress just fine. The only criticism I have is that the nuts and bolts should be labeled so that they correspond with the instructions. I think they should be lettered like the parts of the frame. I had to study the bolts and diagram a few minutes to make sure they were where I wanted them. The foam coverings on the legs don't fit in my opinion. I had to get them to fit on the legs. It would have been nice to have foam that slides on the legs without tearing up, but I'll try not to. This frame is a good one. I will revise my feedback if something changes. It's easy to put together and it's a great value. The bed is too high for most people and you don't need box springs with this mattress. Fourteen inches high, plus your mattress height, is plenty of height. Storage containers will clear the frame. I bought some metal frames that didn't work. Even with the wooden slats, it seems like it's going to last forever.
Product 1: Strong and Sturdy 1.6 inch profile wood slat mattress support. It's ideal for use with platform beds. Product 1: Fast and easy assembly. Product 1 provides additional support for Spring, hybrid, and memory foam mattresses. Product 1. Non-slip tape on the wooden slats prevents your mattress from moving, and foam padded tape is added to the steel frame for noise-free use. Product 2: Steel construction with easy locking system. Product 2 is easy to assemble. There were no tools needed. Product 2. Not for use with mattress only. The box spring and matress are sold separately. The box spring and matress are sold separately.
👤May 2021. I ordered another king size product because I like this one so much and I can't wait for my mattress to arrive. The review was done in Feb. A box spring is required because I accidentally got a low profile bed frame. I ordered Zinus 1.6" to give it enough support, but not too high off the ground. I can't wait to sleep on it after it comes full grown.
👤I rarely review things, but I enjoyed this so much. I wanted to replace Ikea slats on my bed. Non flexible slats work better with memory foam mattresses. They fit in the bed frame. The assembly was easy to do. A pleasant product.
👤It seems like it should be able to hold a lot of weight. I stood in the middle of the center support beam when it was in my frame. There are enough slats that I don't worry about them failing to support a reasonable weight. The queen size bunkie board has an overall dimensions of 78.2 inches by 59.3 inches. The queen size is 80 inches by 60 inches. The open space between my slats is precisely 2.4 inches and the width of each slat is precisely 2.8 inches. There is an open space between the last slat on each end and the frame on my board. The bars are 0.7 inches wide. The overall length is 14x2.8. This is used with the P56 9-leg bed frame. It was easy to assemble in the frame. It's very stable now, because I secured it to the brackets with zip ties. I can confirm that the other components of my bed work together.
👤I ordered a queen size and it seemed like a full one. This wouldn't work for a queen size if it weren't for the original bed slates. The solution is solid but the size seems a bit off.
👤I don't give out 5 star reviews very often. This was a great experience. I bought this frame to convert my existing frame so I could lower the height of the bed for my mother, who recently broke her hip. The package was in excellent condition when it arrived. I used a razor blade to cut along the tape to open the box on the ground. It was the best way for me to do it, as the pieces were clearly marked and visible, as they sat in the open box on the floor. The numbering system is great. I didn't need to look at the directions. Match the numbers and assemble. It was easier for me to start by laying one of the rails on top of my frame. This allowed me to keep the rails in place, but also verify their size, which was a perfect fit in my case. Assembly is simple with Zinus. They included a mini ratchet with the allen wrench, so there was no need for any other tools. The hardware included was of the highest quality, pre-fitted with washers and lock washers to keep the frame nice and tight, when assembled properly. It comes with two sets of wooden slats that are pre-folded. What could be simpler? All you have to do is line up the first slat with the velcro, already in place, on one end of the frame, and then move down the frame to the center, applying each slat in place. Each group of slats is held in place by a strip of velcro along the end of the slats. They are not measuring, no fuss. It was assembled in a few minutes. There are a few extra tips. My original frame was a 1/3 frame, so it's not all boxed in for this insert to sit on. I used a self tapping metal screw to secure the frame and insert in place after I drilled one pilot hole on each side of the foot end. This is only a precautionary measure to prevent the metal insert from sliding on top of the frame. I'm not sure if this would ever happen, but it's better than sorry. 2. I started at the other end of the insert frame and worked my way to the middle of the second set of slats. The alignment of the slats was perfect. To place the last slat in place, you must step out from the middle of the insert frame. I didn't need to use the extra bolts that were included in Zinus. This product is easy to use and earns 5 stars. I'm really happy!
If you prefer a clean, simplistic look in the bedroom, it doesn't mean you have to sacrifice durability; the steel Trisha platform bed supports your mattress without stealing focus. 7-inch platform height is perfect for taller mattresses or for those who prefer their bed lower to the ground; twin size supports a maximum weight capacity of 350 lbs, while all other sizes can support up to 700 lbs. Reliable wood slats are designed to support and extend the life of your latex, memory foam or spring mattress without the need for a box spring. It is easy to assemble, all parts, tools, and instructions are shipped straight to your door in one efficiently packed box, and set-up takes less than an hour with a friend's help. The mattress is sold separately. The mattress is sold separately.
👤If you have a lot of tools, easy assembly takes about 30 min. The geometry was perfect, and it was surprisingly made. Instructions were easy to understand and the packaging was protected.
👤I have had it for almost 2 years and no problems. Frame has been able to store many boxes underneath with no problem. If you have a robotic vacuum and oversized top sheets, you'll need to pick the corners of the comforter/sheets from the floor so the Roomba doesn't get stuck. So far, so good! A great bed frame. It allows our little 10 lbs pomeranian to jump on and off the bed as she pleases throughout the night, and it eliminates our worry of her falling off the bed. Our bed frame is a low platform one and allows our Roomba under it. The assembly took less than an hour and included unpacking and cleaning up packaging. All parts have step numbers on them and are easy to assemble. If the bed frame doesn't hold up our weight, we may need to update the mattress with a new one.
👤The frame makes a squeaking sound when it's been a month. The bed will cause squeaks, non-stop squeaks, but so far there are no squeaks during sleep or moderate movements. I don't understand why the bed is squeaking since it has never been under more than 200 lbs. This is not half of the bed frame's maximum capacity. The bed has never been jumped on or abused and I assembled it correctly, it's simple as can be. I decided to keep the bed and try to repair it. I'll use Loctite Thread Locker to reset the bolts. I might use candle wax to coat the surface area in each of the corners where the frame bolts together and at the same time there is a 2 inch metal overlap of the interlocking frame pieces. The rubber washers could help prevent the bolt's head from squeaking. I'm prepared to replace the bolts with self-tapping screw-in bolts for a tighter fit. The last resort would be to have the frame welded into one piece and do away with the bolts. I believe I'll get a quiet bed, which is what my old wood-framed box spring bed provided when it was elevated by hidden concrete blocks instead of using a conventional bed frame, and I always attach my bed head board to the wall to prevent it from squeaking. I like a platform bed without a box spring, and I found out about it with this steel bed frame. It gives a lot of support. I'm going to try to make it work, but I can't recommend this frame because of its moderate squeaks.
👤The bed is good for the price. The frame is lightweight and has a clean look. I am really pleased. The wooden slats were held in place with the help of the Velcro tape. The wooden slats are lined with sticky tape to help keep your mattress in place. 30 minutes was the time it took to unpack and assemble. The instructions were easy to follow and the parts were clearly labeled. The fabrication was a bit off. The support posts under the center beam were removed 1/3” from the floor once the frame was assembled, causing the beam to bow slightly once weight was set onto the frame. The side beams and footer didn't align well on all four corners, which put additional tension on the bolts. I tried to get the bolt in with the allen wrench, but it was too weak. There are better beds out there. Not at this price.
Sturdy and durable steel. If you want to upgrade your bed frame and box spring, you can do so with this simple-to-build and easy-to-maneuver mattress foundation. The design is made of durable steel and has multiple points of contact with the floor and plastic caps to protect it. All sizes of mattress can be rest on top of the steel slatted platform, but narrow twin, twin and twin XL sizes can support up to 750 lbs. It takes less than an hour to setup with all the tools, parts and instructions packed into one Compack shipping box. The mattress is sold separately.
👤I used brackets to hold my mattress in place. Attached is a picture.
👤The welds on the middle section have separated in 3 different places. Poor quality of frame really disappointed me. The company did not respond to warranty requests by February of this year. There are a lot of comments to the negative reviews of the company stating that there is a 5 year warrant and email and phone number. I have not received a response from the company to my original review. The customer support email address does not respond to email when the 800 number goes straight to voicemail.
👤I love this bed frame. The mattress sliding was one of the reviews I saw. I added hot glue to the slats to give them some grip, instead of putting the mattress on them. Works well.
👤I bought this for my nephew. His mom called me last night and said the frame broke. The description makes these seem to be impervious. I asked my sister how it broke, and she said he sat on one end to put on his shoes and it broke. My nephew is a teen who is around 120 lbs, so he wasn't the issue. The beds are covered for 5 years if the damage was caused by faulty manufacturing. Will wait to see what happens. If the bed frame is not replaced, will be very disappointed. Will update with my case later. There is an update. ZINUS agreed to replace the bed frame after sending them an email with purchase invoice and pictures of where it broke. The bed frame arrived today. I am very satisfied with their service. I will not buy a new bed frame from them again. Thanks ZINUS!
👤This was purchased in the spring of 2016 It was great for a while, but at the end of 2016 it started to fall apart. I don't have sex in the bed, I just hang out or sleep in it, and I don't jump or flop on it. The bars started to fall off of the little metal lips. There was nothing to hold up the bars after they snapped off. I have had to duct tape it several times. It is sinking in the middle. I will have to tape it up once a week at a bar. The bed frame is not good. I would rather sleep on the floor.
👤The bed frame is ok for basic use. There are 2 negative comments I have. You can feel the steel rod when you sit on the bed, because the frame is 6 inches wide. I bought a foam mattress. When the weight is distributed, it's ok to lie flat. I am going to put a support on it. If you are not careful, the corner will hit your leg. My leg was injured. This reminds me to put something down. It is easy to assemble, does not rattle, supports my weight and serves my basic needs, I just added a board from Lowes that costs $7. It is better now.
The metal frame looks great on its own or as part of a pair in your guest room or kids' bedroom, with its sleek and compact silhouette. Under bed theft. The under bed space on this platform is perfect for storing extra odds and ends. Reliable metal slats are designed to support and extend the life of your latex, memory foam or spring mattress without the need for a box spring. It takes less than 30 minutes to assemble with all the parts, tools and instructions in one efficiently packed box. The mattress is sold separately and supports a maximum weight capacity of 350 lbs. The mattress is sold separately and supports a maximum weight capacity of 350 lbs.
👤Here's what you're doing wrong if you think the slats are too short. When you put the middle bars in, don't push one end all the way up against the bed frame and then screw it in on one side. It won't fit the other side if you do that. The middle bars should be in the center of the frame. It won't look or feel like it's sturdy yet, but it will after you put the screws. Put your screws in on both ends and screw them in just enough. Take turns on one side and on the other side. The middle bars will fit just fine if the screws' threads are pulled tight. The other slats will reach across once the middle bars are tight. I was about to call customer service when I realized what I had done. I hope this helps someone else out.
👤I'm a huge islander. The bed frame supports me. I assume the frame likes me because I haven't received any restraining orders. It received 4 stars instead of 5 because of this. It was easy to put together, except for some of the work that was less than standard and required new holes to be drilled. Every single person in my family knocked their shins on it after we put this together. It's funny if you're the first person.
👤My budget is limited because I'm a college student. There are only a few things to say about this bed. The price was within my range. It was easy to build and took less than an hour to build. My mattress fit perfectly. It's minimalist design allows for plenty of storage space beneath it. Highly recommend!
👤I love how cheap it is. The metal is strong. It was easy to set up. If you can read or look around the bars you can see that some of the bars aren't reaching, that's surprising to me. You just have to read the instructions. Trust me. The frame is great. I have a mattress and box spring. I prefer a box spring, you don't need one. The bed frame is strong. I have had 4 cousins that weigh more than 120 pounds each, and a dog that weighs 175. The bed is strong. The bed has a lot of space under it. This bed is recommended all around.
👤It was easy to put together. Don't tighten everything before you get it put together, take your time. Don't strong arm it so tight you can't get it out of your head. The device that comes with it is very generous. Thank you for the tool. The box was easy to open. I put the bed together quickly. I put it together after I was hurt and sick. The average person will take about an hour and a half. If you have helped, you will probably get it done quicker. The stickers are easy to pull off, and the black is solid. If I have to move, I'm tempted to leave them on. It's easy to move. You can store stuff under your bed if the height is good. I don't recommend that. If you live in a small room, you will. 2 or 3 people can sit on the bed, and it won't break. The average weight is 100-150 pounds. I would recommend this product to my friends and family. It's nice not to have a box spring. The bed is not low. I was afraid of that. If you have bad knees, you want a slightly higher bed. This is fine for most people. I had to change the rating to three stars because the bed keeps slipping off the frame if you put the tire bed against a wall on the long side. I have to adjust to it all the time.
You should protect your floor. Are you worried about scratches and damages to your hardwood floors? Don't be! The modern bed frame center slat support leg has a smooth plastic glide that ensures proper weight distribution and is perfect for both carpet and hard floors. What are you waiting for? Place your order now and keep your bed slats and mattress like new. If you have a bedstead steel tube that is more than 1.18 inches, this product won't work. If the steel tube is less than 1.18 inches, you must fill it with material. Before buying, please check and measure the legs. The size is 5.8in, 7.8in, and9.8in. Saving money on bed repairs and mattress replacements can be accomplished by using the bed frame support legs. The design is a cost effective way to maintain your expensive bed base. The material is plastic and metal.
👤Ignore the 1 star review first. I don't know what they mean by lighting. The center support legs on a bed frame can be replaced with a set of two legs. The replacement center support legs for our queen bed frame are very sturdy. They were easy to install. I just needed a wrench and a screwdriver to replace the ones I took off. It's easy! Each leg has a broad base and is a sturdy square leg. The video shows the difference between the junk support legs that came with the bed and the sturdy new ones listed here. Measure your old support legs to make sure they fit your bed frame. Measure the height of the leg. There are different sizes in this listing. It's important to order the right size for the replacement. Instructions to be included in packaging is the only thing that could improve. I looked at the pictures on Amazon. It might be so simple that none are needed.
👤I had to lower the bed. I bought a set to check them out. They were perfect. I ordered a 2nd set because I needed 4 support legs. There was a bolt missing in the 2nd set. I gave it a 4 rating because of that.
👤It is not the right part.
👤The legs tilt when you move the frame left to right.
The fabric upholstery has a steel framework. Good looks and conflagration style. The Shalini makes a stunningly chic addition to your bedroom and is made of sturdy construction and diamond pattern stitching. The Twin size supports a maximum weight capacity of 350 pounds, while all other sizes can support up to 700 pounds. slats are not required for a box spring, and they can be used for both twin and full sizes. Everything you need is packed into a single box and shipped straight to your door, and all the parts, tools and instructions are located in the compartment of the headboard for easy assembly in under an hour. The mattress is sold separately. The furniture finish is wooden slats. There is a bed frame inside.
👤This is the second bed frame I have purchased. I bought this bed after reading all of the positive reviews. The website said it could take five days to receive it. I got it in two. I had a hard time getting this huge box up the stairs in my apartment building, but I did manage to get it up 5 flights of stairs. The bed is sturdy and the wooden plank are held in place by the straps. The bed can hold some weight. My partner is 6'7 I'm 5'6 159. It holds up. Assembly was easy because of the instructions. My bed is not big enough for a lot of under bed space. I was pleased with the look, feel and quality. I moved my bed so that you could see the size. I have a full size mattress set that does not require a box spring. You took the time to read my review. I hope you found it useful.
👤The bed frame was easy to set up, but I found out the headboard was not bug free. This has been a problem for other customers and I wish I'd read more of the reviews. I'm currently sleeping on my couch as I wait for the treatments to come so I can get back to sleep. I think it is a nice bed frame and headboard, but not worth the risk of getting bed bugs or paying for an exterminator.
👤Don't do it! There is more to the frame than you can see. The last reviews I saw about the bedbug were a year ago. I assumed the seller fixed it. I ordered the bed frame and loved it for a while, but then I started getting itchy bumps and my hands were on fire from all the bites. Don't do it because it hurts so bad. I used bedbug killers and spray but didn't work. I've spent 40 on drugs, vitamins, and creams trying to heal the itching and it's only a short-term fix. I thought I could roast them off the bed by using a UV light. That hasn't worked. The issue of the bed is still there because of all the reviews a year ago. They are telling you not to do it. Its not worth it!
👤The bed is a good value. It was easy to put together. The time was 45 minutes. All pieces fit together. The Allen wrench was included. There were no other tools needed. The instructions were sufficient. Not great but good. The bed is strong. The mattress is perfect. It is not a fancy bed. The pictures depict the product. You should adjust your expectations. It has been almost a year since there have been any issues. I'm 6' 3 and it supports me very well. There was no creaking or noise. It is also very stable. It stays put on the floor. I didn't use the strips on the slats. The mattress stays in place. I would do it again. A friend of mine bought the queen size version a couple of months ago and is happy with it. I have the same experience so far. The parts are kept inside the headboard during shipping. To see it, be sure to open it. This feature is great for moving. The king size mattresses are 76 x 80. If you are short on one side, you should rotation your mattress 90 degrees. It is very quiet during those private moments. At 33 months, there is an update. I was starting to hear some creaking. All Allen bolts were tightened back up. The fabric on the bed is holding up.
You can maximize space in your bedroom with minimalist style. Steel slats can be used to support a mattress. The mattress has a unique design to keep it from slipping. There is more under bed storage and no box spring required. It is easy to set up with no tools required. The dimensions for the mattress/box spring are 79.5 x 59.5 inches. Under bed clearance is 16.25-inch slats.
👤I read through 17 pages of questions while investigating this on Amazon. I will try to answer the 10 questions that are on the 17 pages so that you don't have to read the answers. We bought the king bed version and are using it with a 13” memory foam mattress. This is the first review. I will update in a month. The shipping weight is 59 pounds. The box is 42” x 21” It was packed well for shipping. They were vague about when it would arrive. We ordered it on Thursday and it arrived on Wednesday, a day earlier than the shipping confirmation said. The assembly is happening The instructions are easy to understand because they are in pictograph form. You don't really need the words when they are written in English. There are six long metal pieces that make up the perimeter of the bed and an eighth one that goes down the middle. The legs open on the three long pieces. The four pieces that make up the top and bottom are bolted together. The instructions are easy to understand. Don't start attaching them until you lay all the pieces out. The instructions say "A1*1" and "A*1" but they don't say "B" and "B1" to indicate there is. If you look closely at the diagram, you will see that the A and B pieces have slots for a headboard, but the B does not. It took my wife and I less than 15 minutes to assemble it. The pieces are not heavy. Lifting the mattress up onto the frame was the hardest part. There are two long bolts and 12 short bolts. The Allen wrench and nut wrench are the only tools required. Everything was easy to attach. The metal slats are snapped into the holders. Four slats have red dots on them. The slots have small tongues on the end that open into small openings. There are 9 metal slats on each side of the bed. Each slat is 12 inch wide on top and 8 inches apart from each other. The top of the slats is below the frame. This provides a lip to hold your mattress in place and it fits our king memory foam mattress very snug so that it won't move. You don't need a box spring if you use a mattress. The frame is 18 inches high, so the mattress and box spring are very high. The top of the 13 inch memory foam mattress is almost 32 inches off the floor. If you have a traditional mattress, you can put it on the slats. If you have a memory foam mattress without a box spring, you should put something in between to keep the foam from squeezing through the slats. You can use a sheet of cardboard, butparticle board, peg board, thin plywood, and anything else will work. If you want to put in something like that, be aware that the inside dimensions of that lip are 75.5” x 79.5” so you need something slightly smaller than that. Cut it in half to fit in your truck or SUV. My wife and I decided not to put anything between the slats and the memory foam. We bought something to go in between when we read the question answers for 1/3 of the memory foam owners. The memory foam leaking between the slats was reported by 1/3 of the people, and so far on the first day we don't think it will be a problem. There are hardwood floors. There are nice hardwood floors in our house. My wife didn't trust the plastic caps on the frame that protect the floor, so she bought rubber squares to put under the feet. The king bed version has 9 feet so you need 9 square rubber pads. You can go without a dust ruffle if you don't put anything under the bed. The metal is artistic. It is black metal with square corners. You should hide the frame if you are going to store things under the bed. The frame is 18 inches high so a traditional dust ruffle is too short. A woman answering a question said she attached fabric panels to the frame with a stick on the Velcro. We plan to do that. It was very quiet once assembled. The bed did not move when I was laying on it and I was over the 300 pound mark. There was a small squeak if I shook back and forth and got on all fours. Most of the question answerers and reviewers said that there is no squeak with heavy people doing the horizontal mambo. The bed is shaking for certain activities and there is a quiet squeak. I don't think anyone would hear it if they were 40 feet away. It was a slight disappointment. It doesn't change my rating since almost any bed would have more of a squeak than this.
Steel and plywood are durable. More than meets the eye to this modern, clean-lined foundation, it has more functions than it looks. A tall platform with generous underbed space is ideal for storing extra odds and ends, while all other sizes can support up to 700 lbs. slats are 2.5 - 3 inches apart and no box spring is needed. The Quick snap assembly system means no hassle, no setup, and everything is packed into one box and shipped straight to your door. The mattress is sold separately. The mattress is sold separately.
👤I had a previous good experience with one of their frames, this one seemed amazing, no bolts easy to put together tall, but it arrived quickly, and it was easy to put together. I tried calling the company multiple times and left a message, but they didn't respond.
👤The bed frame is dangerous. The Bed Frame lasted 3 months before collapsing. The "Extra Strong metal frame" completely broke at the "Quick snap" joints at the head of the bed while my girlfriend was sleeping. The legs put two holes in the wall. There were items under the bed that were damaged. We are thankful that our pets were not underneath when it happened. After calling the customer service line 10 times, no one has picked up or called me back, even though the product claims to have a 5 year warranty. This product is dangerous. Do not purchase it.
👤I bought the Quick Snap Plaform from Zinus. There is a I decided to post my experience here because I depend on Amazon reviews for many of my purchases. The frame was in a very small box. It was heavy. I dragged it into the house before unpacking it. The pieces were packaged well and labled when opening the box. It was not difficult to put the quick snap together. It was a snap. The slats rest upon a 'ledge' that is just enough to make them end up even with the top of the frame. The one thing that they do not mention is the idea of Velcro. The black straps holding the slats together are on one side of the Velcro and the other side is on the 'ledge'. The slats stay put once you put them down. Very cool. There is an option to use tape on the slats to prevent the mattress from moving. I like the height of 18. It's as easy to get out of bed as it is to get up.
👤I wanted to sleep in this bed. The bed is broken after about 5 months. It seemed to dig into wood floors, so I would recommend a carpet underneath. The middle support screwed in tight, but the weld joint broke, and all of them did. I'm only 140 lbs. and it's rolling with weight. I can move it with one hand. The weld joints in this picture could not have been done properly from the factory. Someone is going to get hurt.
👤The bed was the same from the beginning. It would be a complaint if I had one. I also hit my toes. That's just my own stupidity. I think I was the first reviewer. I might have gotten mine early enough in the production run that everything was still being treated with care. Reviewers of all sizes seem to have differing opinions. I am a queen. It has seen its share of action, but it hasn't budged. I was accused of receiving compensation for the review. Nope! My money and opinions. I bought this bed because we live in a small house with limited storage and it gives us plenty of room underneath. I don't think bed skirts are meant to have one. I have a twin with a bed in my son's room. He's had his for 3 years. It's sad to think that a great product has turned into a bad one. Good luck to all! There is an update on 8-20-2017. As I receive responses to questions I've asked about similar models, I always need to update this. Rock solid and silent. I'm not sure what makes me so special. It's true. I would buy this one again. We have both memory foam and coil spring mattresses on this frame. The thing is still solid after about 5 months. It's hard to believe when you consider the ease of assembly. When we play with our little dogs, we jump around on it every night. You eat ice cream and watch tv in bed. It's not as if a wobble or squeak is a thing. I think I'm going to buy a twin for my son. Please know that my reviews are real, and that I am not a fake. I am not affiliated with this company or Amazon. --- I have only had it for a short time, but it is awesome. It's easy to put together. The only skills required are the ability to count to 7 and the ability to swing a hammer. It is a tight fit, but it should be. If you've ever been to a warehouse store where the rack and bins are large pieces of square tube steel, you'll know that this frame is made of that stuff. I was surprised at how strong and rigid this was. This frame is not made of rock, sway, bounce, or squeak. wink The only complaint I have is that the legs are all the way out to the corner. The frame is meant to be decorative so it can be seen. If you are coming from a bed frame that is more traditional, the legs tend to be tucked back. We have a skirt on that hides the under-stuff, so it doesn't help the toe situation. It was well shipped. There was no damage to the product or the box. I was able to move the box by myself. The package is heavy. The team lift was marked as "over 70 lbs". Plan ahead, have help to carry the box up the stairs or through tight spaces, or be prepared to take the contents one piece at a time. The queen set only consists of 5 pieces of steel and 2 bundles of slats, so it's not a huge task. The slats are bound together with Velcro ribbons, so they will have to be carried in 2 separate bundles. The majority of the weight here seems to be the slats. The head and foot are not the same. I'm not sure if the head will match up to every headboard we have there. Should you want to mount a headboard to this frame, you may have to get creative. I'm pretty sure if you buy a headboard from Zinus, it will work. You have to talk to Zinus about that. I am very pleased so far. The frame has exceeded expectations so far.
It's easy asSEMBLE. 5 year warranty guarantee, no tools required, easy to assemble. The bedstead has a fashionable appearance. The retro pedal is in perfect match with other furniture. The four slips of the panel can be used to keep the mattress from moving. The mattress is not provided. The method of welding platform structure and using fix screw is adopted in the design. The rubber strip in the middle of the bed plays a role of buffering and reducing noise, preventing the sound of the steel pole hitting the bed. You have no worries with a five-year warranty and free replacement parts. The package is easy to install and includes all the parts you need. It's very easy to install. Storage space under the frame is 13 inches, which gives you more space for you. There is a maximum support of 660 lbs.
👤I can't beat the price, it's exactly what I was looking for. It took around an hour to set it up. I noticed that some reviews had the bed on a hard floor without a rug, so we put a rug underneath and have not had any issues. I like the dark copper color of the metal.
👤We love this bed so much. It's easy to rearrange the room when I'm studying.
👤The bed is amazing. I am very happy.
👤I have a 9 inch mattress that is perfect for me. It would be too high if I added a box spring. It's great with my 9 inch memory foam mattress. Make sure the bed is tight when you put it together. I'm in love with this bed. This was a great purchase and I am very happy with it. It's very strong. We need furniture that is going to be used daily and that is metal, so we purchased this frame specifically. I wanted it to be easy to take apart and put together. The bed frame is it! It took about an hour to do it by myself. The price for something that looks nice, easy to put together, and built is amazing. You couldn't ask for more. I am very cautious of buying furniture online as our last bed frame failed to hold up even a year, but I am pleasantly surprised at how sturdy this frame is and I am worried about squeaking. If that happens, I'll update my review. I would recommend this to friends if I purchase it again.
👤It was easy to put together the frame. The iron was perfect because I wanted it to have a little contrast in our room which has a lot of wood. If it is on wood, I would suggest putting something under the legs or putting it on carpet.
👤My daughter put this bed together. After sleeping on airbeds since Hurricane Florence, it was wonderful to finally sleep on a normal bed. The metal slats are very strong and easy to install, thanks to the included parts and tools.
👤It was shipped in two days. It was easy to assemble, even without the best instructions. The price is very reasonable. You need a box spring with this bed to make sure the bed sits higher.
Go Minimalist - Less is more, especially with this modern and structural sound foundation that gives both strength and understated sophistication to your bedroom, two qualities that never go out of style. The twin size supports a maximum weight capacity of 350 lbs, while all other sizes can support up to 700 lbs, making it the perfect platform height for taller mattresses. slats are 3 - 3.4 inches apart and no box spring is needed to support latex, memory foam or spring mattress. All parts, tools and instructions are shipped straight to your door in one efficiently packed box for simple set-up that takes less than an hour with a friend's help. The mattress is sold separately. The mattress is sold separately.
👤The bed frame is out of Ikea. It was easy to assemble and sturdy. I'll show you how to make it the most efficient storage for a tiny studio apartment. Purchase some "White Rolling Plastic Storage Totes" at The Container Store. The 10-inch-high full-size bed frame can hold four 25- and 19-gallon jugs. The queen-size bed frame can hold eight of the 25-qt. The wheeled bins roll out like perfectly-fitting drawers if the lid is placed on the floor. You can replace a chest of drawers for two people with bins that act as drawers under the bed and take up no additional room space. The products should be sold in a bundle. When you're ready to move, put the bins on the lid and voila! You're packed!
👤The bed frame is King-size. Two average weight adults use it with a Tuft & Needle mattress on top. The bed in the middle no longer supports the two support bars in the middle. We have fun in bed, but it's not like we're monkeys. I've sent two support requests to the manufacturer, but no response. I can't recommend this bed because of the quality, poor customer service, and false warranty. No matter how cheap it is.
👤I bought this and it was missing a piece. I contacted Amazon and was told they couldn't do anything except have me return it. I have been trying. It has been scheduled to be picked up 3 times now, but no one has come to pick it up as scheduled. I am furious because Amazon putt8 g me through hell on this. This is not what I expected. I advise you not to buy this item because you will endure the same.
👤I decided to take a chance on this frame after reading good reviews of the other platform bed frames. The taller frame was better suited for the space I needed in the small apartment. The package arrived a day earlier than expected, and it took me less than twenty minutes to put the frame together. It is easy to disassemble if you need to move it. The wooden slats of the frame are not visible when the mattress is centered on the frame. The frame takes away about two inches of space, so a large suitcase that can fit a little but an actual plastic bin won't fit, is possible. The frame is sturdy, doesn't make any noise, and I've been very pleased with the purchase. Some reviewers mentioned that the bed frame was bending over time. I plan on editing this review if that happens, but so far, our frame has held up well for me and my spouse, a combined 300 lbs.
👤It's the easiest item I've ever assembled. It took 20 minutes. I could have been drunk on wine and pain pills. It comes in a big, long box with clear directions and screws with a key. Follow the numbers, link everything, throw down the wood slats and you and the Miss will be testing it's stability in no time at all. Great product!
Platform bed slats queen replacement products from Ziors. In this article about platform bed slats queen replacement you can see why people choose the product. Zinus and Kusrup are also good brands to look for when you are finding platform bed slats queen replacement.
Ziors, Zinus and Kusrup are some of the best brands that chosen by people for platform bed slats queen replacement. Find the detail in this article.