The mattress is sold separately. It is suitable for most of the bed frames. Adding support to your bed and mattress can protect it from damage and sagging. The bed frame has holes, so it's easy to install. If the bed frame has no holes, tighten the screws and attach the bed frame with a brackets and auxiliary plate. The support legs are made with high-quality steel to prevent rust and corrosion, Leg bottom is non-slip and wear resistant, and it has better grip. The complete hardware includes 2pcs height from 7.08" to 13.38", a height support leg, and a supplementary plate. The design is a cost effective way to maintain your expensive bed base. Saving money on bed repairs and mattress replacements can be accomplished by using the bed frame support legs.
👤Did not have instructions. Everything should always have instructions even though it should be self explanatory. They do not extend. I would know if I'm doing something wrong or if it's faulty with instructions.
👤Inexpensive repair for a bed frame. The plastic part was used to support the king bed frame. The mattress was sinking due to a broken part.
👤It is easy to install and support my antique bed with bed hooks at each end. The bed felt unsafe and it was squeaking. I was worried that one of the supports would break. No Squeaks are very sturdy now.
👤It was used on a king bed. These are easy to install but not cheap and will probably last longer than the bed frame.
👤This item works well for what it is intended for. The only problem is that I had to spend more money to get the right hardware.
👤I spent a lot of money on a bed. The support legs were not working well. This caused the water to sink. I was going to replace the entire bed, but I discovered these to try. It was the only problem. Saved us.
👤I couldn't fit the bed frame in the right size.
👤It's easy to install. It was done within minutes. I didn't have to replace the entire frame.
It is easy to exaggerate. The bedrail can be put on either side of the bed. It can be assembled in minutes without using tools. A handy push-button release valve quickly deflates toddler bed bumper to lightweight and space-saving size. It comes with a travel bag that can be used for packing in your suitcase, popping into your car or in carry-on for plane trip. It's ideal for at- home use. The next generation of portable bed bumpers for toddlers are designed by the CUTTING EDGE NON-SLIP DESIGN team. The safety flap extension uses child's weight to anchor the toddler bumper firmly in place, unlike bumpers that rely on thin non-skid strips to maintain position. It assures the most active sleeper a safe night's sleep while you rest nearby with peace of mind. A great design that doesn't leave you breathless, is designed to inflate in seconds for a full and tight bumper. Saves your breath for your child. You can sleep on the go and at home with their sleep safe and sound on the go and at home products. Both you and your child will be safe wherever you go. It's the perfect tool for a big kid bed. Children's well-being always comes first at hiccapop. They take it upon ourselves to rigorously test and retest their products for optimal safety after all the regulations have been met.
👤I bought a hotel and cruise for our summer trips and it worked out perfect. It is easy to inflate and deflate. It was rolled up great and put in a pouch for our luggage and stays put on the bed. It has nonslip dots on the bottom. I was able to wipe it clean after my 2yo peed through his diaper and some got on the bumper. We used it to share a bed with my 2yo and 5yo. My 5yo uses a rail and 2yo still has a crib, but it works. I found my 2yo upside down or sideways every morning, but never at night or on the floor. Very happy! We didn't have to bring a playpen or ask for a king so we could share a bed. We were able to get connecting rooms on the cruise and they were able to sleep in their own room. Very happy and recommend.
👤I loved this product. When we traveled to visit family, we bought this set for our 4 year old. It was convenient that a bag is included for storage, and they packed very easily, taking up very little room/weight in out suitcase. We arrived late and had to get our dude ready for bed. I was exhausted from traveling and was not happy about having to figure out how to use something new. The instructions were very clear. The first bumper was fully inflated after about four easy breaths. The inflation process can't be compared to inflating a beach ball or inner tube, because you have to push your air into them. The bumpers were inflated so that there was no stress on the lungs. I was amazed and in awe of the simplicity. After you inflate it, zip it up, and position it underneath the fitted sheet, you can light it. The bed we used was positioned next to a window. My husband and I climbed over the bumper to get my son to look out the window or read a book. We did not have to re-inflate it. I thought we would have to re-inflate it at least a few times over the course of the vacay, especially with all the action it saw. We had to pack it up. The process was as easy as removing the bag and putting the air out. These have been one of my favorites. Family travel purchases. Well done!
👤My husband was rolling out of bed after he broke his hip. He is afraid of bed rails. This product works with people of all ages. When we can visit our children and grandsons, we will be able to pop this into the suitcase. I did not inflate it completely because I knew that he would have to sit on it to get up even if I did. The barriers wake him up and make him scoop further away from the edge of the bed to remain safe. I ordered the memory foam version of the bumpers and there's no worry about it being too heavy when you have to get up. Our queen size bed sheets aren't deep enough to add bumper coverage, so I'm worried. I've been able to find a solution by buying a king size fitted sheet and Tucking it in more, but now I have to cut off a portion of the flat sheet so it isn't too big. Buying a different size sheet is a small price to pay for knowing he is safe and that this is the best product I found to assist the elderly. I sent the product to his doctors, caregivers, family members and neighbors. The VA was encouraged to issue this within their equipment by me. I could easily see it replacing bedrails. The product is the best ever.
The foam bed bumpers through provide gentle touch as a subconscious signal to remind your toddlers that they are close to danger and should move away. High-density memory foam provides a soft touch to kids while also firm enough to prevent them from falling off the bed. The cover is made of cotton and Silicone. The child bed bumper is easy to install. To allow the foam to rebound, open the vacuum package. Put it on the mattress. Third, cover the fitted sheet. The standard size is 52" x 6.5" x 4.5". The bumper on the bed is great for toddlers. It's ideal for an infant. Foam is CertiPUR-US certified for safety and performance. Quality is what stands out in sleep bed bumpers. If you are not 100% satisfied, you will get a 30 day refund. Foam is CertiPUR-US certified for safety and performance. Quality is what stands out in sleep bed bumpers. If you are not 100% satisfied, you will get a 30 day refund.
👤I gave it before I wrote this review. Our 10 month old was a gymnast, she would get her arms and legs stuck in the bars. We tried everything to keep her limbs inside. She wasn't sleeping well because she was constantly moving around throughout the night. She slept like a baby after using this product. Most babies don't sleep well and that's why that's a saying. She stayed in one spot and woke up happy and refreshed. I was concerned when I opened the box because they were so flat. They were laid out on the floor and within 20 minutes they were a normal size. There was no smell from the shipment. It's a little hard to put the sheet on but it's worth it.
👤My daughter is 2.5 years old. Not a twin, not high off the floor. I was not sure if these would work in a small bed, but they are great. Even though there is a half rail, she falls out of bed every night. She looked like she wanted to fall out of her sleep when we used these. She fell asleep on it. It works on a crib size mattress. It's easier for me to sit on them when I comfort her because they are memory foam and feel good. Her dad asked jokingly if he could buy some for himself because they looked so comfortable with her sleeping between them. When I first opened them, there was a smell of something synthetic. I washed the covers and the smell dissipated after I aired them out. One of the best purchases I've made in a while. My child loves them and doesn't fall out of bed.
👤My son is now sleeping on his own mattress at 1 year old. The bed rail bumpers are perfect. There is a full sized mattress on the floor for him. A full size sheet is still over the top. They are memory form. They are tall enough to keep him from rolling off the bed, but when he is awake he can throw his leg over the pad and it will compress, causing him to fall down. If we have to lay down with him, they are comfortable to lay against or use as a pillow. We got these instead of the mesh bed rails.
👤I don't write many reviews, but this one is worth it. I'm excited about this product, but it's the little things that bother me. I ninja-roll out of my son's bed with these because they are comfortable and stay in place. They don't move. I don't have to fix them every day. I have a different company's version that does not include the outer covering. They are awful. They do their job. I have to fight with them all the time. My daughter's bed has all of them in it. I wish I'd bought these for my daughter's bed last year. I can't justify replacing them since hers do the job. Buy these!
It is easy to install: connect the upper and lower connecting tube first, then install the two sides of the upper and lower connecting tube into the slots of the lifting rod, after that lock the left and right lift rob and the base, and pull the mesh. If you have a problem with the installation, please contact them immediately, they will help you in time. The Safe Bed Rail Guard is 27 inches tall. Their product supports vertical lifting and depends on the thickness of the mattress. The child is hard to climb out and fall from, so you should not let your baby fall from the bed. The small bag can hold toys and other small things. Measure your bed before you buy it. Premium harmful material is made from non-toxic materials. The frame and padding are made of strong steel and can protect the baby. It's suitable for any type of bed, including kid bed, leather bed, solid wood bed, built-in bed, flatbed, thick mattresses bed, and other large-size beds. There is only one side rail per package. If you want to surround 3 walls, you need to buy side rails. They will solve problems within 24 hours if you contact them freely. They will solve problems within 24 hours if you contact them freely.
👤It's good, but it could be better. The pros are 1. You get what is advertised. It looks good. It is not flopping around. I like the look. 3. Love the fact that it stays up and down, rather than the look of some that open like a flap. I like to keep it down when not in use. The cons are 1. I don't like large advertising logos. I don't think I need to advertise the product if I paid for it. It looks cheap instead of being part of the furniture. 2. The pocket is on the outside. Design flaw? I would like to keep a pair of diapers, extra binky's, and possibly my manual pump, but the problem is that I'm walking up baby. There is no use for the pocket on the outside. 3. The Y strap is not very good. It doesn't have much to hold on to. Had it had a fitted sheet that went around the corners of the mattress, it would be much stronger and more effective. 4. Not as strong as I would like. It needs all 3 to be sturdy and cost 180$. You can't really rise it up in bed, so you have to be tucked in and have someone on the outside look after it. Single moms with husbands working over night shifts will struggle to tuck me in because my husband likes to. 6. If you want a matching side, you're going to have to pay 20 dollars more. I bought it at 59 dollars and it went up to 64 dollars. I took an additional star off because of this.
👤Really pleased with this! The rails have a piece that screws to connect each rail to another which holds it well, but we were unable to screw into our frame because we couldn't find a piece of wood. It wouldn't be sturdy if it were just one or two, but the 3 hold each other well. It is strong when I lean on it. It comes with straps underneath if you don't want to screw it to the base but the instructions were not clear on how to do this and it wasn't tight enough to hold the rails in place. We decided to set them up, put the mattress on top, and connect them all to each other. The daughter is 7 months old and has no problems. I don't have to worry about her falling off the bed because she can sleep.
👤Initially, we put it under the box spring and the mattress, but we decided to use the y straps because it was not very sturdy. We decided to keep it. The buttons to move the side up and down did not work properly in the following weeks and this morning the hinge between the two sides came undone. I walked into my room with my daughter because the hinge on the product malfunctioned. I do not recommend anyone purchase this product. It is unsafe in my opinion. Will be trying different brands of railing.
The TotCraft Bed safety Rail Guard works with any type of bed that has slats, box spring or wooden base. It's also suitable for cribs, double twins, king size beds, single mattresses, toddler beds, Tempurpedic beds, Bunk beds, full size beds, Twin beds, Double mattress and Twin mattress. The metal rods and mesh fabric are made of non toxic materials. The patented fold down feature allows this bedrail to fold down and out of the way when getting in and out of bed. Installation is very easy as shown in the video and manual. The mesh fabric is machine washed. Money back guaranteed if you don't like it, you can get your money back. Click on "visit the TotCraft store" to watch more testimonials on TotCraft infant bed rail. Click on "visit the TotCraft store" to watch more testimonials on TotCraft infant bed rail.
👤I really wanted to like the fold down feature but there is a big gap. My baby was not happy when his hand got stuck. My daughter can get into the gap. Imagine if the baby gets stuck. It is dangerous. I will return it and find a bar in the middle like we already had.
👤The product isn't intended for toddler bed/cribs. I watched the online instructions because they are not good. After attaching the guard rail to my son's bed, we discovered that it would tip over if he leaned on it at all. We attached twist ties to his bed frame to hold the rail in place. Our son loves that he can get out of bed now that this worked for us. It is not intended for toddler cribs and beds.
👤We share a king bed with a baby. It's not meant to keep them from climbing over. The videos provided on the page helped make it easy to install. When our son is ready to sleep on his own, we will transfer him to the big boy bed. You can secure it in a variety of ways.
👤The larger version is the default picture when you see this product. When the selection is short, it doesn't change to show the long one. It's too easy to order the short one when you want the long one if you're in a hurry. Two extension pipes and a cover are different between the two models. Do you think customer service would allow me to buy two pipes and a cover and pay for them, instead of having to return and re-order when the time is short? Nope. There are several other vendors on Amazon that sell the same thing at the same price. I found out after the fact. Pick another seller.
👤I decided to buy a bed rail for my 3 year old after she hurt her arm when she fell from her toddler bed. I bought this rail because I couldn't find the right one for the toddler bed. The guard rail perfectly fits the bed, I went for cheaper ones that didn't fit it. The installation video was easy to put together. The product looks like it is made of sturdy materials, and I think it serves its purpose. I think it's a great idea.
👤This is what I needed for my son's bed. This will give me a piece of mind that he won't roll out of bed. The fabric is mesh so he can breathe. I like that it folds down when not in the bed. It is the right size, so that if he wakes up before me, he can get out without trying to climb over. This bed rail is very nice.
👤I bought this for my 19 month old and it looks great. The cat ear design makes the bed look better when used. It took me less than 10 minutes to install it. It folds down against the bed when not in use. It works perfectly on the Queen size bed we have, and it doesn't raise the mattress like the one I got from Hiccapop. It's amazing that I could uninstall it and install it on another crib bed. This product is very good.
Helping child transition. The metal and fabric bed rail will give you and your toddler a sense of security as they transition to sleeping in an adult bed. The size is large. The rail is 21” tall and is able to accommodate thicker mattresses. It works with mattress and box spring sets, or with platform beds with a solid base. TheFOLDS DOWN: The hinges allow you to fold the rail so you can sit at your child's side or change the sheets without removing it. Stopping and being safe. The product is in line with current standards. The frame is made of metal. It is easy to exaggerate. The bedrail can be put on either side of the bed. It can be assembled in minutes without using tools. It is easy to exaggerate. The bedrail can be put on either side of the bed. It can be assembled in minutes without using tools.
👤We got this for our child to be able to climb off the crib when he wakes up, but during sleep he may fall off. The full length of the crib doesn't provide enough room for climbing out of the crib, so it ends up being too long for that purpose. I understand that this is not the purpose of the item, so no starts are deducted for that. If someone else wanted to use it, I wanted to mention it. The major negative is that it is hard to fold down, the latches are hard to lift, and it stays below horizontal level, preventing you from coming close to the bed. It should be completely down so it would not be a problem for anyone to see. The way this product was designed made it easy to pull up a couple of chairs with their backs towards the bed and it was just as easy to use.
👤This bed rail is not well designed. The materials seem good but the assembly is terrible. The directions are not very clear so you have to guess. The steps did not work correctly with my product, as I did follow the directions. The screen had to go on the opposite direction because it looked like I had a different frame. The biggest issue came on the legs. There is a peg hole on the wrong side of the leg. I had to put the legs in opposite directions. I tried to flip one leg over to face, but the lock was really loose and I couldn't do it. We will return it. I wanted a simple solution to keep my child in bed. Don't over complicate Summer brand, it should be easy.
👤I didn't notice that you needed a box spring or that the bottom of your mattress had to be flush with the bed rail. I can't really use it because my mattress sits lower than the bed rail and the straps aren't long enough to accommodate this. Assembly and the cover were both pain to stretch all the way over, and I thought that was because of the pins. I was frustrated when I couldn't use the darn thing. I'm not sure how I messed up the assembly, but I couldn't get the thing to fold down. I can't get the thing to be disassembled to return it. I think that was a waste of money.
👤The product was awful. If the plastic pieces are sticking out of the opposite side of the mattress and the belts are tight, it stays in place. When you change the sheets, what happens? It is difficult to get the plastic back in place. If that side of the bed is against the wall, it would be in most cases where you only use the bedrail on one side. If the bedrail isn't in place, the child can easily push it off in their sleep or get caught in it. A dangerous product.
👤It was bigger than I anticipated. Almost all of the crib/toddler bed size mattress was blocked by it. This may be good for some people. It made it hard for my toddler to get out. It was difficult for me to open the pins. I don't understand why the gate needs to go down. A toddler cannot slide down it to get out. It wasn't easy to install and didn't stay in place.
The function:711 is perfect for attaching a newer metal bed frame to an older headboard that requires a hook or claw style attachment. The offset mounting design of the brackets makes it easy to install. The dimensions of the modification plate are: Height: 7-1/4", Width: 2, Depth: 1-1/8", slots long: 3 -1/4", Overall Bracket Depth: 1-3/4", 2.5mm thick for more headboard stability, thicker steel than other brands. Heavy-duty steel with a protective yellow zinc coating can resist rust. The brackets, 8 screws, and 4 nuts were included. If you need to attach the footboard to the frame, you can purchase 2 of these items. The brackets, 8 screws, and 4 nuts were included. If you need to attach the footboard to the frame, you can purchase 2 of these items.
👤The photos show the attaching bolt going both ways, away from the headboard. It would be much easier to assemble with a bolthead, not aPhillips head, if there wasn't aPhillips head on one end. It works other than that.
👤We connected an old headboard to a new bed frame. It doesn't fit well. The screw was tightened as tight as it could go, but the headboard was wobbly and fell when someone got on the bed. My husband was able to modify it to keep it from moving around so much. I would have had to return the product if it had been me.
👤Thanks for being versatile. It was easy to use. Sturdy. There is a queen box, mattress and frame. Well done.
👤It is easy to install. It was sturdy and what I needed. It was very affordable and I saved $100.00.
👤I bought it for a king bed but it wasn't rigid enough. I returned it.
👤A challenge to figure it out. The work is ultimately done.
👤It took a long time to assemble and attach the headboard. I don't feel comfortable resting on it because it doesn't hold it securely. When we move around, the headboard swats.
Children's well-being always comes first at hiccapop. They take it upon ourselves to rigorously test and retest their products for optimal safety after all the regulations have been met. Mister and baby friendly! The bed rail is everything the metal rail isn't. They slide under the sheet to protect your active sleeper from nightly falls. They are easy to climb over and even sit on, so they make a great time for both parents and children. The dimensions are 52 x 7 x 5 Inches. STURDY, SAFE, and SECURE! The bed rail is non-skid. Enjoy the peace of mind that your child is protected from falling. Are you still in the process of toilet training? They have a water-resistant cover for you. Quality safety assurance! Their priority is safety, and it always comes first. The standard for performance and endurance is passed. The BumBumper toddler rail is non-toxic and can be trusted. In seconds! Your child can do it. Take the rail and put it under the sheet. You won't notice it until it's in place, no more clumsy metal guard sticking out like a sore thumb in the cute child décor! No longer necessary? Store for the next one by folding it. One size fits all. It works great on twin, full, queenking size mattresses. The bed gate is a perfect solution for bed safety issues for special needs or elderly individuals. Purchase is risk-free. Absolutely love it or get a full refund.
👤I was looking for a bumper that was tall because my kid is kind of a wild sleeper and he has been known to launch himself over pillows in his sleep. He hasn't slept in his big boy bed yet, but these seem to be tall enough.
👤When we were going to visit my sister, I bought these as a last minute item. I didn't want my 2 year old to fall out of bed. These are serious. They are very sturdy, thick, and stay in place. The fitted sheet kept popping off at night, but they didn't move. I used one on my side and it was comfortable to sleep against. She was not going to roll out of bed with these. My sister ordered some for her son because she liked them so much. A bed rail is not as convenient.
👤I bought this set of bumpers for my toddler so he wouldn't fall out. They are compressed into a box for shipping and there is a note that says to allow up to 72 hours for the foam to decompress. The first bumper did not completely collapse over the course of a week, but the second did. It would be nearly impossible to return these since I have no way of fitting them back into the original packaging. The only reason I'm rating 3 stars is because the bumper works perfectly, the second is useless because it isn't fully decompressed, and returning items is impossible since I have no way to fit them back into they box they came in. I would have to buy a large box to fit them in. If the item is great, you just have to decide if the risk is worth it.
👤These may be pool noodles. Huge waste of money. When we switched from the rail to the road my 3 year old fell out of bed for the first time. These do not fit under a fitter sheet, no matter how much we tried. We only used a twin bed because the bed is against the wall and we couldn't fit it under a fitter sheet or keep the quilt tucked in. It's a pointless product that slips and slides. We have couch pillows around her bed because this won't keep her safe when she falls again. They had an airtite seal. My toddler doesn't like it either. She hid it so she didn't have to use it.
👤I wouldn't recommend a twin size bed. The cushions are so thick that they take off 14 inches on each side.
👤These are perfect. My child did not want to leave the dock a tot bed, so I had to think about what I could do to make it work. I placed the bumpers under his bed sheet, placed a small pillow under his twin bed, and made a large dock. It worked well. My child is snug and cozy inside because our beds are pushed side by side. One of the bumpers did not puff up as much as the other, but it's still functional. It was not as full as the other. It works and is great for our needs.
The Extend-A-Rail can be adjusted from 20 to 30 inches with the push of a button. The bedside support bar is safe to support up to 300 pounds and provides independence when getting in and out of bed. For use with most traditional and platform beds, including Twin, Full, Queen, King, and California King, and with mattresses between 8 to 15 inches thick, but not for use on beds with extra soft mattresses. The rail frame will blend in with the style and comfortable feel of your home, making it the perfect bedroom addition, and for added storage, please see their available organizer pouch. The bed rail is easy to assemble and secure, and it includes all the necessary equipment.
👤The product is excellent. We bought it for my elderly wife because she would not want to roll off the bed at night. It serves a double purpose by providing a stable aid that she can grab hold of to get out of bed. She has a history of falling and the unit has provided her with a lot of emotional security. The design was thought through. The medal is sturdy and can be expanded. It has a tie that can be easily reached across the bed under the mattress to keep the metal frame from sliding out. My wife is not at risk of slipping between the frame and the edge of the mattress. We give it five stars for anyone else who might need it.
👤I was hoping this product would help my husband recover from the fall. I was worried that a king size mattress would make the Bed Rail more difficult to maintain. There is a Attach and tighten the strap after a short time. The rail was strong and ready to help him get into the bed. The item was the same color as the Antique Bronze Headboard we owned. I found this ready made and not a custom design. It helps me to help him when he is already in bed. This is a must have for bed safety.
👤I knew I needed a side rail that was big enough to protect me but wouldn't obstruct getting in and out of bed, because I had fallen out of bed and injured myself several times. The answer was the ABLE LIFE BEDSIDE EXTEND-A-RAI. My husband did it in 5 minutes. The rail doesn't stop me from getting into and out of bed. I don't have to worry about falling out of bed anymore because the rail is there when I get restless.
👤If you have a fancy bed that you can use a remote control to adjust, then this will not work for it. This needs box springs because you won't have box springs. Box springs are needed for most rails. If you have that type of bed, do not get this. If you have a regular bed with box springs, it should work. I recommend that you call your local medical equipment store and explain to them what you need so they can look at your bed and provide options.
👤The product is very sturdy and easy to install. At night, I try and sleep walk. The rail is perfect. It prevents me from falling out of bed or it makes it hard for me to leave the bed. I have bounced off of it a few times and I weigh 233 lbs., but it stays in place. The small button on the top of the rail can be used to extend or withdraw the rail. As your motor skills are impaired while sleep walking, I have not bypassed this simple but effective design. The size of the bed and changing linen makes it easy to work around, as it fits against the mattress.
Trust in numbers has been achieved over 500,000 units sold. The first advancement in bed rails in 50 years is Hiccapop Bed Bumpers. They are more comfortable for your child. CertiPUR-US FOAM is made without flame retardants and heavy metals. It is tested by independent accredited testing labs. Trust the best. The washable cover is non-skid and stays firmly in place. hiccapop bumpers are the perfect size and height to allow ample room for your little one to stretch out while sleeping. Toddler beds, twin, full, double, queen and king beds are all compatible with hiccapop bumpers. Do not use on top bunks. In seconds, they fit under all the deep-fitting sheets. Soft washable cover with silicone beaded non-skid fabric stays firmly in place. If you spread the fabric flap under the fitted sheet, your child's weight will hold the bumper in place while she sleeps. The hiccapop bumpers install safely in seconds. All federal safety standards for bedrails are passed. A 100% LIFETIME GUARANTEE is backed by an unmatched quality. All federal safety standards for bedrails are passed. A 100% LIFETIME GUARANTEE is backed by an unmatched quality.
👤These things beat using a traditional bed rail. It's much softer, easier to set up and portable. The kids can't climb over to get in bed because it's too high, but it's enough to keep them from rolling off. The bumper is tight under some sheet sets, but we didn't experience any issues. No problem if you have a thinner mattress or deep pocket sheets. They have a tendency to scoot further towards the edge of the bed despite having a non skid bottom. Fixable with a few safety pins. I think a rubber bottom might work better. I received this product at a discount in exchange for my honest, unbiased review, which is exactly what you're reading. If this review has helped you, please click the "yes" button.
👤I was torn between the bed bumper and the bed rail. I was nervous about how it would work. I want my 2 year old to be safe when she goes from a crib to a twin bed. I'm very glad I took the gamble with this approach. I put it on the mattress underneath the sheet and the mattress protectors and it stays in place. It goes about 1/3 of the length down the twin mattress. I was not prepared for the recommendation to use fitted sheets. Even though they weren't deep fitted, my sheets worked well. I was still worried about it being tall enough to keep her safe, but it has worked so well that I was still nervous. We haven't had any issues at all. The customer service of this company has been great. They contacted me to make sure I was happy and to make sure everything was going well.
👤I liked that this product was soft enough that my son wasn't bumping it and hurting himself, it was just ok for a year. I should have seen the red flags because this item does not hurt anything, it was always moving under the sheet, but I never thought it would be dangerous. The bumper moved off the top of the mattress but under the sheet. It was normally placed when my son was asleep but it happened after he was awake. My 3-year old son woke up at night and stood up on his bed, but when he looked at the bumper on the mattress, he fell and needed stitches. It would have been better if he left the bed. I'm throwing it in the trash. Will never use again.
👤I opened this at 5:08pm today. I'm excited to use this for my son. I will wait about two hours before I measure it again, because I am letting it rise to 4.5". The left side of the bumper seemed to be flat, and I was concerned that the start of the roll was at the ends of the bumper. I'm hoping it will rise. The right side seems to be doing well. I'm not going to put this under the mattress protectors until it rises to where I need it to be. It fills the length of the crib beautifully. I was a little surprised that my product is $3 cheaper with free shipping, after I registered my product on the company's website. You wouldn't receive the 2 day Prime Shipping, but I've already paid for it. I was a little disappointed that it was still cheaper, but I think it should be offered for $22 with Prime shipping on Amazon. I'll be back in a few hours to see how it goes. There is an update. It has been 2 hours. I adjusted the measurement to 4 inches. We are a bit short of what we should be. The left side perked up more. I measured it at 3.5. The right side was the same height as when I unpackaged it. I'm not sure if I should be concerned or not. It wasn't fully inflated to where it needs to be. I put it under the mattress protectors and the fitted sheet. My son's mattress has a fabric cover, but it doesn't have a plastic one. The bumper slid around towards the center of the mattress not over the edge. My son was able to get in and out of the crib. I'm crossing my fingers that he doesn't fall out of the crib tonight. We are currently in the middle of a move and I am going to put some pillows and blankets on the floor beneath him. I was shocked to see that this isn't intended to be used on a toddler bed, I just read the tag and it was obvious. It isn't recommended at all. Maybe I didn't read something I should have. I will use at my own risk. I hope it goes well.
The metal frame can be used for all mattress types. The bed frame is easy to install. The package is easy to assemble. The clearance under the frame of the Modern Bedroom Furniture is C12.7 inches. The metal frame of the twin bed base can hold up to 220.4lb. The bed features a strong support for a relaxing sleep. The box spring replacement size is 77. There is a one-year limited warranty on the X 36" X 34.8". The box spring replacement size is 77. There is a one-year limited warranty on the X 36" X 34.8".
👤I didn't expect what I got when I bought this frame. I didn't have time to send it back or replace it once it arrived. The box was good and just the quality of the manufacturer. I opened it. The frame was sealed up and there were brown smudges on it from being packaged. The slide was broken in the box. The paint job is not good. There is silver showing through in some spots, chips in several place that are noticable, a dent where paint is starting to crack, welding jobs is really bad, and the square screw bolts are too long and stick half and inch out of the sides of the frame. It looks like a cheap bed. Even if I could find a better quality at the same price, I would still pay for it. I was embarrassed by this company and would definitely not recommend it. I had to make sure that the sides I put were where the mattress would cover the paint chips. Terrible. I usually leave a positive review for a product. I leave positive ones. This is the cake.
👤This bed was used for an extra holiday guest. I don't think it's strong enough for a daily use and wouldn't buy it for a kid. It took more time than expected to assemble it. I didn't expect it to be so small.
👤Sturdy frame! It's a little difficult to put together. It is possible. Would definitely buy again. It's perfect for a small room.
👤You have to know what you're doing when you buy 2 for my son's room. I didn't need the instructions for the second one. It is very easy to build and study.
👤It was easy to put together.
👤Both my girls love theirs and they were easy to assemble. I grabbed a few screws from a local hardware store, and only have one complaint. It's easy to fix.
👤My son's room is going to be redesign. It is easy to assemble and sturdy. He and I love it.
Platform bed rails for full size bed products from Ironwork. In this article about platform bed rails for full size bed you can see why people choose the product. Hiccapop and Shinnwa are also good brands to look for when you are finding platform bed rails for full size bed.
Ironwork, Hiccapop and Shinnwa are some of the best brands that chosen by people for platform bed rails for full size bed. Find the detail in this article. Nobranded, Totcraft and Summer Infant are also brands that their products are worth to check.