Best Platform Bed Queen Size with Headboard Wood

Headboard 7 Dec 2022 10+ Comments Open

1. AmazonBasics Modern Industrial Design Headboard

AmazonBasics Modern Industrial Design Headboard

The queen-size metal bed frame is sleek and strong for ultimate sleeping comfort. The metal frame is noise-free because it has 10 wood slats, non-slip tape on slats, plastic feet, foam-padded tape and non-loosening screws. The hook-and-loop configuration makes it easy to raise or lower the headboard to accommodate different heights. The bed frame has a vertical clearance of 12 inches from the floor to the bottom of the rail. The bed frame holds up to 500 pounds of combined weight and is backed by an Amazon Basics 5-year limited warranty. The bed frame holds up to 500 pounds of combined weight and is backed by an Amazon Basics 5-year limited warranty.

Brand: Amazon Basics

👤I decided to read a few of the reviews on here because many seem to have the same issue that I had, but many others did not. I had slats that didn't fit and a beam that didn't line up. I was so angry with the outcome that I went back and read that the foot of the bed frame legs may be backwards. It all fit like it was supposed to when they took them off. The only issue with this is that I thought I put them on the right way, but they were not. The bed frame is great and there is a hiccup out of the way. Thank you for your help writing about this.

👤The bed is very sturdy and doesn't make any noise. The under bed storage is fine for me, and you can adjust the height of the mattress with the help of Velcro tape. Assembly! slats don't fit at all, I made a mistake. I checked the user manual before I returned it. The left and right bed legs were reversed. That is why! I reassemble the bed legs and they fit. Hopefully you don't waste time on this like I did. It is a nice bed.

👤The middle beam is not long enough to be easy to assemble. The beam had to be tied to the frame. The wood planks that are close to the foot of the bed are lying on the frame because they weren't cut to the same length. Please look at the photos asap. When my daughter was home, I spent 200 dollars on a bed. Had to use an air mattress. I would like a refund.

👤I ordered two of them. The first never made it to me, but I suppose that isn't Amazon's fault. The second was shipped at no cost. I think I got what I paid for with this one. My main complaint is that the components should be measured correctly so that they fit correctly. They didn't with the bed I received. One cross beam was a full inch and a half too short. I am a part time gun smith and armorer. I usually have no problem with assembling anything. There is a I am not sure if this would have lasted for most Americans. I have a pair of hunting dogs that are almost 100 lbs. It seems like it doesn't seem like it will last long. I lost one in shipping and didn't want to send it back. I hope I can find a new frame at one of the local stores.

👤The bed frame is very sturdy. The slats seem to not fit at the bottom of the bed. I realized the front legs needed to be changed thanks to another reviewer. It's not our fault that they were labelled wrong. If you have a problem, switch the parts. The frame is very quiet and feels solid after this.

👤The description did. The cross beams were secured with Velcro. The headboard does not stay attached after the failure of ricol.

2. AmazonBasics Foldable Platform Under Bed Storage

AmazonBasics Foldable Platform Under Bed Storage

The product has a weight of 26.3 pounds. It is designed for people who weigh up to 250 pounds. Twin platform bed frame has a supportive foundation for a spring, hybrid or memory foam mattress. There was no box spring needed. The frame is easy to store and move in tight spaces with the folding mechanism. Extra under-the-bed storage space with a vertical clearance of 13 inches is provided. No tools are required for a fast and easy setup. The steel has a sleek black finish. The steel has a sleek black finish.

Brand: Amazon Basics

👤The basics platform of Amazon is doing it's job but has a design flaw. The edges of the rods should be covered with a smooth surface. I put my new mattress on this platform. It ripped off my new mattress at all the sharp edges, voiding my warranty. If you place smooth cloth over the platform to save your mattress, please think of this scenario. I also bought a mattress cover. I placed the mattress to see if it fits. It ripped off my mattress.

👤I was surprised that the bed frame was as cheap as it was, but I am pleasantly surprised that it is holding up. I bought this to go with my new King sized memory foam mattress, I am 120 lbs and my boyfriend is 170 lbs, and we have had no problems with our sleep. I have not experienced any creaking in the bed or the frame. I was able to carry it by myself down the stairs to the bedroom because it was a bit heavy. My younger brother helped me set it up. He helped me pull the thing out of the box and cut some zip ties, but I could have done it myself. It is very easy to pull out the box and unfold the frame, you just need to snap some corners together. If this helped you, please give it a thumbs up, I am trying to get better at writing reviews.

👤I have a deep cut on my thumb when I pulled the bed frame out of the box, there is a sharp metal jutting from the rounded corner where you grab it to pull it out. More people can get serious injuries from this if the product is not better. I wanted to post a picture of my thumb but decided against it because Amazon might not post my review.

👤I've never said this before, but Amazon finally got something right with one of their products. I was expecting short posts after reading reviews. It took me more time to get the package in my house and unpack than it did to assemble the frame and make my bed. It was simple to unfold four auto-locking legs and then use two bolts and two odd little spacers to secure the frame pieces together. I was able to throw my box spring. The bed is tall. Without a box spring, the top of my mattress is above the window I sleep next to. I suppose I could get out a measuring tape, but it would take a lot of effort. Ignore the fact that this only supports sleepers up to 240 pounds. That should have been more than 2200 pounds. I am a fat boy and this thing doesn't move or groan.

👤It's easy to set up but there are two issues to be aware of. My full size mattress slipped because there was no lip to hold it in place. My queen size is heavy and has a soft bottom. The side legs are only half an inch and you'll kick them into bed if you do that nightly. I wrapped the legs in bubble wrap. I still kick them, but it doesn't hurt. I made corner "collars" that are the size and shape of the plastic corner protectors found on standard box springs to keep the full size mattress in place. The platform bed had holes for the headboard. If the manufacturer included foam tubes and snap on plastic collars, they would get five stars. They get three. I get the other two.

3. VASAGLE Headboard Footboard Under Bed Storage

VASAGLE Headboard Footboard Under Bed Storage

The Particleboard is Melamine-faced. INVITE COZINESS Your: night. You can rest in your bed until the morning is bright and you wake up with a beam. The ultimate relaxation of being at home happens here with this made-with-care metal queen size bed frame. This heavy-duty platform bed is supported by a steel frame, reinforced by 9 metal legs, embellished with durable engineered wood panels, and strengthened by metal bars. There's a new style of love called postmodern-industrial-lover. The mix of rustic romance and metal charm is sure to make your bedroom feel more industrial and vintage. No problem! The space below can be used to cram storage baskets with extra pillows, blankets, and dream diaries out of sight, transforming your messy bedroom into a goodnight dreamland. It's simple! You might wonder how to assemble this giant when facing it. They provide you with numbered parts and illustrated instructions to make assembly easy.

Brand: Vasagle

👤It took a week to get to me, but that is the first world problem. The package is heavy because the wood and metal parts are not plastic. This bed has no plastic in it, which makes it feel heavy. I haven't sexed on it yet, but it seems free of sucks. The seller's wood matches the rest. The bed frame is good.

👤Looks good. It works perfectly on my purple queen size mattress. If you go at it hard, it will be very hard. Would recommend if you don't. There is enough room to store bins. Measure to size out storage containers. Headrest is strong enough to hold up against chill and read. I didn't get any strips for the rails to prevent the purple mattress from sliding on the frame. Not bad for guest bedroom, airbnb setup, etc.

👤We have several products from this company and have not been disappointed. The bed is sturdy and does not make noise. I love the style it goes well with my shelves, and the faux wood adds a nice modern feel. The middle legs are right where I can hit my feet. I wish they were closer to the middle of the frame because I have problems with my feet. I will try to wrap them in something that is discreet. I am very happy with my purchase.

👤It is a nice looking bed frame, it seems sturdy, and it went together in a straight forward manner. It arrived with a split from the top to the bottom of the wood panel on the inside of the foot board. I would return it if it weren't a hassle and I hadn't had it assembled.

👤I looked at a lot of different options before choosing this one for my son. I am so happy I did. I was very happy with my purchase. It is very sturdy and attractive, and it is easy to assemble, I put it together myself in about an hour and a half. I was worried that the fake wood wouldn't look right, but it looks great. You don't need a box spring with this one. The only small complaint I have is that the headboard is a little too tall. The bed is wonderful for the price.

👤I read a lot of reviews and maybe all of them were honest. I was scared that I would end up wasting money. The bed was easy to build and I did it alone. There is no damage to the frame. I saw a few people mention that, but mine was in perfect shape. The directions were easy to follow and everything was lined up nicely. I don't have a gap with the right mattress. We were able to thoroughly and adequately test it and it's pretty quiet and sturdy.

👤It's easy to put together. Quite strong as well. The mattress slides around more than I would like. If I push the mattress as I walk by, it will slide off, but mostly it happens when there's no weight on the mattress. It's not like a super lightweight mattress, it's pretty dense. The bed frame is made of metal. It would probably work if they added some skateboard tape or something similar that would add some grip to it. I can't complain about the price. It is easy to put together.

4. Olee Sleep Platform Foundation VC09BX01Q

Olee Sleep Platform Foundation VC09BX01Q

The metal bed frame has a minimalist design. The dimensions are 79.5 x 59.5 x 9 inches. All hardware, tools, and instructions are included in the assembly package. The wooden slats have tape on them. There is no box spring required.

Brand: Olee Sleep

👤The FACTS are in a nut shell because most people don't like to read long reviews. The product is good. It is worth the cost. Sturdy as well as holding people. This product is very good and I would highly recommend it.

👤Sturdy metal slats. There are two things you can do to hold a 100lb mattress and a large group of people. The mattress doesn't move between slats. Good purchase. Good price.

👤Inexpensive, easy to put together by yourself, does not require any extra tools, lower than the traditional height, sturdy, high enough for under bed storage, value for money, edges are rounded. The paint chips are cheap and the hardware is easy to use. Make sure you are okay with the height. This piece is great until you look at it in a different light. It's a good deal.

👤A great bed frame. If you are an adult or a couple, this is the frame for you. It bolts together in less than an hour. If you want a box spring, it has many slats to hold it. It has a complete box structure so you don't have pressure points digging in the floor. It doesn't move. From top to bottom, it supports you. The price is right for what you get. I will pass it on after the delivery person warned me. It is heavy. The steel used to support an adult American couple and mattress is not light. The parts are light enough for one person to carry. It is over kill for babies, little children and teenage girls. There were no rollers either. I use felt strips on my hardwood.

👤Excellent choice for mattress. It is easy to assemble in less than 10 minutes. Absolutely recommend this one!

👤I had to assemble it in 15 minutes. Didn't need to look at the instructions. You won't need to do that because it's so easy. The frame is strong and light. It holds my bed and my cat. The bars sit on the inside of the frame and I'm worried about the little spots to break. We will see how it goes, but as of now it is perfect. I highly recommend this.

👤My toes were hit so bad that it was hard to walk. I was worried that the bed frame wouldn't fit my weight. I used three hours to assemble the frame because I was stuck pushing the metals into the right place. It fit perfectly.

👤I could have completed this on my own, because it was so easy to assemble and my roommate and I put it together quickly. I should have paid more attention to the dimensions, but it will fit my needs for the time being. It came in quickly and we don't have any concerns about it.

👤My boyfriend and I are both on the bigger side. It took both of us to build the initial frame, but only one person was needed after that. It feels very sturdy.

👤This is the perfect stress foundation for me. I am very happy with theRITE HEIGHT from the floor. I would change the product for everyone.

5. Linenspa Headboard Brackets Compatible Headboards

Linenspa Headboard Brackets Compatible Headboards

It's easy to anchor a headboard to your bed frame with the help of brackets. These brackets are compatible with all of the headboards. Purchase two sets to complete your bed with a headboard and footboard. All hardware and tools are included in the Linenspa bed frame. The bed frame has a black finish and will not change the look of the base.

Brand: Linenspa

👤The bed frame is not good. You wonder how hard it is to set up a simple bed frame by yourself. Instead of waiting for your roommate to come home to you. It looks easy, you lay everything out. You try to attach the bars, but they collapse in the middle as you try to line up the holes to screw them together, because this company thought it would be awesome to be able to fold your bed frame when you disassemble it. The convenience and time saved from folding your taken apart bed frame is diminished with how long it takes to get it together the first time. You finally get the base together and you think, "That's gotta be the most ridiculous part, no way this bed frame could get any more complicated." You are naive. If you don't have a burly friend to help you with this, you should follow the steps 3 and 4. When you screw the center slats in, your roommate gets home just as you put the bed frame together, and she can hear you putting it together. You think that it is easy to put the slats in and stop living like Jesse Pinkman, but you don't know that there is still 40 minutes to go. The first piece of furniture to enter. Great. You have done the bare minimum and maximum of what you are expected to do. The next one is going to have to get in. Too much force. It was like that when I said my palms were bruised the next day. Is it because you are weak? You are weak, but that is not the reason you can't get the slat in. The bed frame is wide. Your roommate is angry with you. She is willing to help. The two of you have tried for a long time. You use your strength and your brain. You use physics. One of you is trying to push the bed frame out of the other's way as they sit on the floor across from each other. It works with a single slat. You try more. And waste time. The reason the slats are too long to fit in the bed frame is because the center support slats that need to be screwed in first are shorter than the regular support slats. Go back a step and remove the center slats. The center supports need to be re-screwed. All is well. You put your mattress on the bed frame. The bed frame is too narrow for a full mattress. Life is meaningless. Thank you for coming to my talk. 3 stars wouldn't buy again, but not mad enough to make a fuss. Maybe you thought 3 was too generous after reading that review. Don't screw the center slats in before you put the rest in.

👤We ordered a queen size. Excellent quality! The frame is strong. No noise! Does not make noise. The mattress wanted to slide off the frame. We put 2 strips of rubber grip pads between the frame and the mattress. Does not move now! Love the storage underneath! The price and frame are great. The perfect dust ruffle was ordered on Amazon. There is a picture of a dust ruffle attached.

6. Zinus Platform Headboard Support Espresso

Zinus Platform Headboard Support Espresso

Natural wood grain detail meets impressive structure in this solid wood foundation in an antique espresso finish that is every bit as remarkable as its clean-lined, durable framework. No box spring is needed because the wood slats are reliable and closely spacing. A thick and sturdy solid wood frame is constructed with steel interior framework for longevity and can support up to 700 lbs in the twin size. All parts, tools and instructions are shipped straight to your door in one efficiently packed box for simple set-up that takes less than an hour with a friend's help. The mattress is sold separately.

Brand: Zinus

👤The beams broke. The beams are made of smaller pieces of wood.

👤Don't buy! The platform doesn't meet the requirements of many bedding manufacturers. The slats are more than 3 inches apart. The product doesn't meet its intended purpose and according to the manufacturer of my mattress and a large retail chain in New England the product doesn't adequately support a mattress without additional support and it's use will void your warranty. I spent a lot of time researching to find the right product and from the picture it looked like the slats were close enough, but they are not. It is well made, contrary to some reviews. The people who complain about the center posts bending are most likely moving the bed without lifting it. The worst part of it all is that Zinus's customer support is the worst. I asked if they could send me without charge or even charge me for additional slats. After a month of phone calls where I was told they would send slats, I finally got an out right refusal to send me or sell extra slats. Amazon should investigate this on their own and pull the product or advise buyers that they will need to do additional work on this product once they receive it to bring it to minimum standards. There is an update. See the response from the customer service company. They are horrible. Their answer was either ignorant or a lie. You are the judge. They were given a chance to respond to their claim before I wrote this. The measurement you see is correct because the system is very controlled and can not be messed with. I would not be writing this if it was 3. The angle of the picture makes a difference. The distance between each slats contact point is just over three feet, but this photo shows that their claim is incorrect.

👤The slats on this unit are attached to each other on a strip of velcro. I contacted Zinus to make sure I could buy more slats to keep the frame together. I am buying a very heavy latex mattress and it is recommended. I was told that I could purchase additional slats. I invested in the frame and latex mattress based on that guarantee. I was told I could buy them from an outside source, such as slats. Lowes, Home Depot, or your local hardware store. Say what? The slats are made from1/4" thick solid wood with a tape that affixes to the bed frame. Local stores don't sell these. It is possible to cut down a small piece of plywood. They told me that it would be illegal to sell them to me as they don't have a price for them. They should be sent to me for free as they broke their promise. After several emails and dropping the CEO's name, another rep apologized and offered to send them for free. That was great news, until I received them. The new slats were shorter than the old ones. They wouldn't span the width of the bed. They fall out if you see the picture. I can't believe they have a poor quality control system. Customer service will no longer acknowledge me after I asked for a response twice. If you want to take your chances with properly manufactured slats, this may be for you. I would not recommend this company's products or customer service.

7. Zinus Platform Mattress Foundation Headboard

Zinus Platform Mattress Foundation Headboard

Steel and Plywood are durable. There is support for the modern bedroom. The Mia Platform Bed Frame checks all the boxes for lovers of clean lines, simple silhouettes and long-term reliability. The foundation is made entirely of steel and can support many years of Snoozing, twin size supports a maximum weight capacity of 350 lbs, while all other sizes can support up to 700 lbs. slats are 3 inches apart and have no need for a box spring to support latex, memory foam or spring mattress. All parts, tools and instructions are shipped straight to your door in one efficiently packed box for simple set-up that takes less than an hour. The mattress is sold separately.

Brand: Zinus

👤Do you have a nephew in school? A daughter who watches too much TV is considering getting a date. Someone who's sworn off of men forever? Is it possible that a romantic partner would prefer his/her bedroom activities to be as gentle as possible? I have a bed frame for you. For the rest of us, consider a different path. There is a pic related.

👤This bed is a complete failure. Don't waste your time building it and then sending it back. I have worked at an engineering firm for 12 years and am mechanically inclined. I will tell you that the bed design was a complete failure. The joint pivots allow the whole end of the bed to shimmy about 2 inches back and forth while the legs and feet don't move, because the headboard cross bars only have one bolt each on either end. To see what I am talking about, watch the video. After building this bed, I decided that it was not going to last for my 15 year old and that we should buy a new one. We only used it for a couple of days. When I tried to return the bed, I contacted Zinus. I was hoping they would give me a discount on a different bed frame. I was told to return it through Amazon. I returned the bed and ordered a different bed from Zinus that was designed differently, and so far we have had no issues. The twin bed frame design from this company is a complete failure and they need to stop selling it or redesign it. I am not sure if the larger frame sizes are the same as the twin, but it is definitely not.

👤The product was easy to set up. After only two months of use by a person of 100 lbs., it began to make noise and the center piece of the mattress broke. I contacted the customer service of Zinus to get a replacement part and screw for the bed frame, because I registered for the "warranty" on the product on the website. I have submitted two difference ticket claims, sent them at least 8 times, and not received a single response that was not an automated "we will contact you." I called the customer service number and was told that they couldn't do anything and that I had to wait for the other department to respond to my emails. I can't even get a reply about getting a replacement part. I am very disappointed in the company who doesn't stand behind their products.

👤This is a good bed. I got three of them. Some of the bad reviews come from people who don't like mechanical engineering and don't know how to tighten a bolt without over tighten and striping out the screws. There are a couple of tips that I have. Before you tighten it down, put the whole frame together very tightly. Loctite Red will help the bed frame from backing out and squeaking during extracurricular activities. Don't jump on the bed, it's not a trampoline. If you can't help but jump on the bed, buy a trampoline to sleep on. I hope this helps people. Get yourself a good night's sleep.

8. Olee Sleep Heavy Non Slip Support

Olee Sleep Heavy Non Slip Support

You can maximize space in your bedroom with minimalist style. Steel slats can be used to support a mattress. The mattress has a unique design to keep it from slipping. There is more under bed storage and no box spring required. It is easy to set up with no tools required. The dimensions for the mattress/box spring are 79.5 x 59.5 inches. Under bed clearance is 16.25-inch slats.

Brand: Olee Sleep

👤I read through 17 pages of questions while investigating this on Amazon. I will try to answer the 10 questions that are on the 17 pages so that you don't have to read the answers. We bought the king bed version and are using it with a 13” memory foam mattress. This is the first review. I will update in a month. The shipping weight is 59 pounds. The box is 42” x 21” It was packed well for shipping. They were vague about when it would arrive. We ordered it on Thursday and it arrived on Wednesday, a day earlier than the shipping confirmation said. The assembly is happening The instructions are easy to understand because they are in pictograph form. You don't really need the words when they are written in English. There are six long metal pieces that make up the perimeter of the bed and an eighth one that goes down the middle. The legs open on the three long pieces. The four pieces that make up the top and bottom are bolted together. The instructions are easy to understand. Don't start attaching them until you lay all the pieces out. The instructions say "A1*1" and "A*1" but they don't say "B" and "B1" to indicate there is. If you look closely at the diagram, you will see that the A and B pieces have slots for a headboard, but the B does not. It took my wife and I less than 15 minutes to assemble it. The pieces are not heavy. Lifting the mattress up onto the frame was the hardest part. There are two long bolts and 12 short bolts. The Allen wrench and nut wrench are the only tools required. Everything was easy to attach. The metal slats are snapped into the holders. Four slats have red dots on them. The slots have small tongues on the end that open into small openings. There are 9 metal slats on each side of the bed. Each slat is 12 inch wide on top and 8 inches apart from each other. The top of the slats is below the frame. This provides a lip to hold your mattress in place and it fits our king memory foam mattress very snug so that it won't move. You don't need a box spring if you use a mattress. The frame is 18 inches high, so the mattress and box spring are very high. The top of the 13 inch memory foam mattress is almost 32 inches off the floor. If you have a traditional mattress, you can put it on the slats. If you have a memory foam mattress without a box spring, you should put something in between to keep the foam from squeezing through the slats. You can use a sheet of cardboard, butparticle board, peg board, thin plywood, and anything else will work. If you want to put in something like that, be aware that the inside dimensions of that lip are 75.5” x 79.5” so you need something slightly smaller than that. Cut it in half to fit in your truck or SUV. My wife and I decided not to put anything between the slats and the memory foam. We bought something to go in between when we read the question answers for 1/3 of the memory foam owners. The memory foam leaking between the slats was reported by 1/3 of the people, and so far on the first day we don't think it will be a problem. There are hardwood floors. There are nice hardwood floors in our house. My wife didn't trust the plastic caps on the frame that protect the floor, so she bought rubber squares to put under the feet. The king bed version has 9 feet so you need 9 square rubber pads. You can go without a dust ruffle if you don't put anything under the bed. The metal is artistic. It is black metal with square corners. You should hide the frame if you are going to store things under the bed. The frame is 18 inches high so a traditional dust ruffle is too short. A woman answering a question said she attached fabric panels to the frame with a stick on the Velcro. We plan to do that. It was very quiet once assembled. The bed did not move when I was laying on it and I was over the 300 pound mark. There was a small squeak if I shook back and forth and got on all fours. Most of the question answerers and reviewers said that there is no squeak with heavy people doing the horizontal mambo. The bed is shaking for certain activities and there is a quiet squeak. I don't think anyone would hear it if they were 40 feet away. It was a slight disappointment. It doesn't change my rating since almost any bed would have more of a squeak than this.

9. Homestyles Naples Headboard Footboard Matching

Homestyles Naples Headboard Footboard Matching

The Naples queen bed is made of poplar hardwood and engineered wood and has an Off white finish. Assembly with bolts is required. The product dimensions are 87” L x 64.75” W x 52” H. The mattress is not included. Comes with a clear coat finish to help protect against wear and tear from normal use. Ships in several boxes. Ships in several boxes.

Brand: Home Styles

👤I am very upset by the images and description of this bed. This bed is not white, it is cream, off white, antique, not sure what to say, but not white. I took advantage of the financing on the large order and will either have to paint a brand new piece of furniture or deal with the mess that will be caused by returning it. Completely false advertising and very edited photos. Attached is a photo with daylight bulbs and white walls.

👤The bed is beautiful. The pictures don't do it justice. My daughter needed a new bed to replace her twin bed. I searched for something that would match her furniture. The bed is listed as white, but it's actually more of a cream color, which is exactly what I was looking for. I wanted to make sure people were aware.

👤The bed was a nice guest bed for about a year, but one day the side rail cracked and the bed fell down, breaking two support legs as well. The bed is described as being more sturdy than it is, but many of the substantive parts are not hardwood or reinforced, which is not acceptable for a nearly $400 bed. The sides were warned about by other reviews. I contacted the company to inquire about getting replacement parts, but after nearly a week of back and forth, they finally said that they don't sell replacement parts, and neither do any suppliers, so if any piece of the bed breaks beyond a month, you can get a new one. We will either fix the bed or replace it. I will not buy this brand again.

👤We had high hopes for this bed. There were many problems. The first was that it was supposed to be in three separate boxes. Amazon says it comes in one box. Two boxes were given to us. The side rails were missing. Try to explain that to the customer service rep in another country. The front of the headboard had a large piece of it chipping out. The picture and description show that it is a yellowy-cream color. We returned it once we got the number of boxes.

👤My granddaughter's bedroom is at our house. It was delivered in three large boxes. I realized immediately that I would be doing some assembly. It was a very simple process with great directions and everything was engineered to fit perfectly. I had the entire bed frame assembled and 888-282-0465 was 888-282-0465. I am very happy with the purchase and would not buy from this seller again. It looks great, is strong and sturdy, and enhances the look of the room.

👤It is heavy, comes in three boxes and there is at least 20 feet of packing materials, but on the front of the headboard there is a small area that is not painted, so if you are looking for stark white don't believe that. I am going to the hardware store to get some wood to cut two more slats for the bed because I am about to put it together. I am 5'2 130 and don't think the slats will hold my mattress and box. If you have a heavy mattress, you might want to keep this in mind. The foam mattress has only three slats. I couldn't get the same bed in my town for less than 699.00, but I think it was a good deal. The color is not as white as you might think.

10. Signature Design Ashley Contemporary Platform

Signature Design Ashley Contemporary Platform

The queen throne bedform. The queen platform bed is a smart choice for a minimalist bedroom retreat. The platform bed is made of engineered wood/ engineered veneer with natural wood tone finish over replicated oak grain, with footboard, rails and platform. The platform design doesn't require a foundation or box spring, and it's versatile, so it's perfect for your master bedroom, the kids room or a guest room. The queen size corset is available. This platform bed is perfect for a king or queen and can be added with your choice of mattress and sleep like royalty. Simple instructions are required for assembly. 2 people are recommended; memory foam and innerspring mattresses are sold separately.

Brand: Signature Design By Ashley

👤I did an inventory of parts. The nuts were missing for assembly. They refused to help me and I had to contact Amazon. I told her that Amazon did not manufacture it. She said they can't help. Do not buy from her. A US based company does not provide support for their product. Thumbs DOWN for her.

👤The box was very heavy. It was bad enough that the screws included were bent, broken and stripped, but what's worse is that the stabilizer bars are 2 inches shy of reaching across the bed. How do they expect anyone to sleep? One would find themselves on the floor. This is the worst quality control I've ever seen, and I've seen some bad things. Don't even think about buying this product.

👤The mattress support system is a disaster, but the frame went together well. The design is very poor, it is impossible for one person to do it alone, and the screws that came with the support legs don't fit the nuts. We went to the hardware store to get new screws, but the nut in one of the supports was crooked and the third screw didn't fit. We had to jury-rig it with materials on hand, and the support posts were a little wobbly. They will hold the mattress up, but will probably make the bed move. There is a If we ever have to move, this bed will be a pain. Do not recommend this product.

👤My daughter put it together in less than two hours. It is the right height for me because it is sturdy, solid and does not squeak. Yes, there is a but. If you can pass the assembly directions, you will have one solid platform bed, but they were all in a single bag and there was no written explanation. I love it!

👤After only 2 weeks of use, the bed is not very comfortable. Even after the bolts were tightened again. It is not very sturdy because it moves when you sit or lay on it.

👤I was excited to set up the frame because it seemed like the wood was high quality. I realized they had sent me a queen size frame instead of the full one when I was setting up the 4 sides together. I would bite the bullet and make it work. I had been sleeping on the floor for a week after moving into a new place. I tried to assemble the center support beams, but the screws they provided didn't fit in. The screws wouldn't line up with the support beams, so they were useless.

👤We bought two of this bed. The first bed was easy to assemble, but we had to put some supports on it. The metal pieces didn't line up, so the bolt couldn't be screwed into the hole it was supposed to be in. We had to drill a large hole in the top of the piece to get the bolt to go straight up and down. We had to buy extra screws to finish putting the bed together after the issue was fixed. The second bed had a broken corner and supports that did not line up for the bolts to fit in and be bolted down. We're making it work, but unfortunately would not recommend this bed to potential buyers as they will be frustrated wasting their money on a product that will not come as expected.

11. FSTAR Headboard Strengthen Foundation Noise Free

FSTAR Headboard Strengthen Foundation Noise Free

The box spring replacement size is 77. There is a one-year limited warranty on the X 36" X 34.8". It's best to choose a twin bed frame with a headboard that can provide a good night's sleep. The products have a strong frame and sturdy steel slat structure. The metal bed frame can hold up to 500 lbs of heavy-duty and no Box Spring is needed. You can easy to assemble in 20 minutes by following the instructions. If you have a question about installation, they will reply with details. It is easy to clean the room because there is enough space under the bed to store debris. The dimensions are described. The detail size of the bed frame is L77.2 x W35.6 x H 12.72. The bed height is 11.12"

Brand: Fstar

👤The width of this item is very odd. It's about 35 inches narrower than a twin mattress and 30 inches wider than a cot-sized mattress. I put the overhang over there because I usually put stuffed animals along the wall in the corner. The mattress could be centered if one sits carefully. The mattress is fine because there are no corner holders. It is a little odd. The bed was assembled today. I did it myself. It was easy to assemble. The hardware came in a pre-sorted pack and included an extra piece. The only tool needed to complete the assembly was the included allen wrench. The instructions were clear, but at a few points I wasn't detail-oriented and used the wrong bolt. That's on me, not the product. It's ready to sleep on. There was no movement or creaking when I sat on it. I didn't move very much. I am overweight and don't want to take chances with my health. I have a 12-inch mattress, and that is not what this frame was meant for. Half of it is over the footboard. I think a 6-inch mattress would be the best for that look. The wooden decoration portion of the bed is a little too close to the top of the mattress. The storage capability is good. The entire underbed is available to put things in because the bed has no leg at the center.

👤I am a larger woman and I was a bit worried about buying this bed. The bed arrived on time but the box was damaged. I didn't think much of the pieces. I had to start over because I rushed and didn't pay attention to the instructions, it took me about an hour to put everything together. If you are putting this thing together by yourself, take it slowly. I heard the leg snap after I put everything together and moved the bed. It was broken enough to cause problems in the future. I had to send the old bed back to the store to have it replaced because I couldn't get the leg replaced. The delivery for the replacement was delayed because of the winter storms, but I still used it. I was able to sleep on this bed even though I broke my leg. I give this bed frame a 5 out of 5 because it is sturdy.

👤I was concerned about getting a bed frame because of the reviews not being as detailed. This frame is gorgeous. It is easy to assemble, my bed does not slide and it is even quiet. It is a perfect amount of storage under the bed and not bulky. I would recommend this bed frame to anyone. This frame is terrible. I have no luck contacting the seller. The bars have bent and it rattles. I have lost two support beams because of bending. I would like to return it. I am not happy with it. I am getting worse sleep than before.

👤The bed would get 5 stars if the headboard didn't come bent. It's very difficult to put together if you have two people. The bed is not easy to assemble. Trying to figure out how to get a hold of customer service. The bed is great once it is assembled. It is very sturdy and resistant to squeaks. Customer service was contacted. I was told that the factory couldn't send me a replacement. I would have to return the whole frame. I wasn't going to do that because it took 2 hours to assemble and the only problem was the headboard. Re-boxing and taking something heavy to the store is a whole other issue. I need it to stay together as it is for my grandma with balance issues. I had the option of taking a soft hammer and hitting the frame back into shape. This medal is not going to bend with a soft hammer. I will not spend more money to fix an item. The resolution was a $10 refund. Thank you? The bed is still functional and it's just a cosmetic issue. I paid for it and would have liked to get what I paid for. The customer service was good but at the end of the day I received a broken item. This is the reason I am so nervous to order off Amazon.

Summary

What is the best product for platform bed queen size with headboard wood?

Platform bed queen size with headboard wood products from Amazon Basics. In this article about platform bed queen size with headboard wood you can see why people choose the product. Vasagle and Olee Sleep are also good brands to look for when you are finding platform bed queen size with headboard wood.

What are the best brands for platform bed queen size with headboard wood?

Amazon Basics, Vasagle and Olee Sleep are some of the best brands that chosen by people for platform bed queen size with headboard wood. Find the detail in this article. Linenspa, Zinus and Home Styles are also brands that their products are worth to check.

You May Like

Share Your Story

Your name:
Choose product to comment:
Write your review:
By submitting this review, you are agree that:
  • Your review is based on fact, honest, polite and not harmful to anyone or any brands.
  • We have full right to show or not-to-show your review after moderation.
  • No spamm please :)
Disclaimer
We might earn comission for your shopping via our links, it doesn't cost you extra. This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com