Best Platform Bed Queen Frame 18 Inches

Frame 28 May 2022 10+ Comments Open

1. Platform Mattress Foundation Reinforced Assembly

Platform Mattress Foundation Reinforced Assembly

As a professional seller, Molblly provides aWorry Free 5-year limited warranty and a 30-day refund policy. If you have a question, please contact them. The steel frame design is both stronger and heavier than a similar bed frame. It supports up to 3500 lbs, perfect for people with heavy mattresses. The whole structure is much safer and firm because of the reinforced leg structure and Integrate structure. The frame is non-slip and noise free and has extra bed-legs and steel slats for support. The life expectancy of the mattress is doubled. The bed legs are 18 inches long and can be assembled in minutes without the need for additional tools. Exchange and return service is offered. If you have any questions about the installation instructions. They'll be glad to help you.

Brand: Lotcain

👤The frame was described. The slats are 6 inches apart which is not great for mattresses. The manufacturer of my mattress suggested no more than 3 inches, which will extend the life of your mattress. I put a board on the slats. You have to be careful not to put your toes on the metal legs. I bought a large pool noodle measured cut and sliced it in half so I could slip it on and not have to use my toes anymore. A fix for 99 cents.

👤I bought this to replace a bed that was very stinky. There's so much space under the bed that four large people and one confused cat can fit under it. This bed is really good. I'm giving this 4 stars because of how far apart the slats are, and it caused back issues for my spouse and me. If you buy this bed, you should also buy yourself a set of bunkie boards. Your back will thank you.

👤I thought this was locked into place without tools and screws. I was wrong. It came with all of the tools and parts. This took 35 minutes to set up. I didn't have someone else to help me. There are two more I've never put furniture together by myself. I have a bad back. You can figure it out if you look at the pictures on the instructions. If the rest of the items don't have label stickers on them, why label everything in the picture A-O? I thought it said "easy set-up". The locking bolt and nut on the middle support beam labeled "G" did not fit together well. Hope it doesn't break.

👤I like this frame. It is what I needed for my cottage studio. It gives me a lot of space for storing my baskets, and it is strong.

👤The frame is large, but it is an awesome one. The frame is too long and wide on each side. I will be reaching out to the vendor. No one wants to get hit on a hard piece of metal in the middle of the night.

👤It was easy to assemble. I did it all by myself. You will need help getting it to place of setup, it is very heavy. It is very strudy.

👤Exactly as described. It took him about an hour and a half to put it together. There are pre drilled holes for a headboard but not for a foot board. It's perfect for us because of the Tones of space under for storage. The bed is 18 inches high, but we are thrilled with it, the old kitty can not jump up, but we added a bench at the end of the bed for the cat.

👤The frame is easy to assemble. There is no need for a box spring. I was given more under bed storage. I put an anti slip rug pad under the mattress to stop it from sliding.

2. Platform Mattress Foundation Spring Noise Free

Platform Mattress Foundation Spring Noise Free

The new features allow you to make full space usage under your bed. Solid Construction bed frame has extra strong steel construction,urdy metal support and reinforced screws to make it stable. Installation is easy, it can be done in 20 minutes with the help of handy hardware and instructions. It's noise free. Every leg has anti-scratch gasket to protect the floor and Seamless welding prevents creaking as you toss and turn. The foundation is made from steel and can support up to 3500 lbs, perfect for heavier people or those with heavy mattresses. The mattress can be put on the slates directly, ideal for sleepers looking to break away from a bulky box spring.

Brand: Homus

👤The design is genius, the packaging is neat, and the instructions are easy to follow. After 2 months of light use, frame making noise when moving, and not being loud or annoying, I feel the bed is not going to last. This thing is going to be thrown away, 1 star.

👤The packaging came with a pair of gloves, all the bolts, and a few extras. It is very easy for one person to assemble alone. There is a lot of storage underneath the frame. I can fit a cello, instrument cases, a few skateboards, two luggage's, and a lot of other objects. I thought the 14in of clearance would allow me more. I have a box spring on top of the frame and a mattress on top of the frame, which is perfect for me, because I am 5”9 tall.

👤After about a month of use, the bed starts making a noise. The noise coming from the frame comes from the mattress we use. I decided to buy after reading about increased weight support and no noise. We don't store items under the bed, but we can fit suitcases.

👤It is easy to assemble. Two people make it easier to help hold the ends of steel rods. My new foam mattress in a box is not exactly the same size as the one I purchased. I have to push the mattress back into place every day because it is not held tightly by the bed frame. I hit my shins a number of times when I returned to bed after dark, since the frame was a bit larger than the mattress.

👤I am satisfied with the platform frame I purchased. It is hollow and the slats are more on the aluminum side. I hope the slats don't bend and that the squeaking doesn't happen, because it causes concern for the people who are on the healthier side. It appears to be tight right now. I hope that I am not worrying in vain because I like this frame. I put this together in 25 minutes and it was easy.

👤I did it in under an hour, it was easy to assemble and I am 62 years old. It is everything it says it is. The quality of the frame is strong and not cheap. I was skeptical when I read that it could hold up to 2000 lbs., but after assembling it, I have no doubts. If we need another seller in the future, I will look at this one.

👤The bed is very sturdy and easy to put together. We are both large and tall, so it feels like we are adequate to handle our combined weight with a couple of kids. Solid, no squeaking!

👤It was very easy to unbox. Line things up with the easy video instructions. I made a few mistakes by rushing the job and assuming I had the right screws. Do it in the order that it is done in the video. If you take 10 minutes to prepare yourself well, you can save 45 minutes. I used a mallet to help me with the last part. If you are strong, you might need a mallet, but a 50 year old woman like me was happy to have one. I had a $100 dollar frame with wood slats that broke after 5 years, the frame was too light, and the mattress always slid around without non-slip thingies. The bed frame solved all of that. I really like it. One reviewer showed a photo of the wooden one that cracked, I looked at the other ones that were supposed to unfold and be easy to assemble. I made a decision on this one. I like the clean lines and space under the bed.

3. Platform Anti Slip Strengthen Mattress Foundation

Platform Anti Slip Strengthen Mattress Foundation

Their function and advantage is that you can enjoy your time on their bed frame. The COMASACH products have a strong frame and sturdy steel slat structure. Twin Size(inches): L74.5"W37.5"H18", For mattress size L75"W38". The bed frame package is 40.2 inches in diameter. The bed frame with steel slat support and steel tube is thicker than other products and supports up to 3500 lbs. It is easy to set up with all the tools and the metal bed frame, which has a long life cycle and is easy to clean. There is enough space under the bed to store debris, which is convenient for cleaning, and makes the room cleaner. It is easy to choose the room style that can be matched. It is easy to choose the room style that can be matched.

Brand: Comasach

👤I think the weight ratings they list are derived from thin air, but I can say that this will hold two real full size adults, will support some relatively enthusiastic extra-curricular activities, and is easy to put together. It is high enough to hold items underneath.

👤The bed frame is very sturdy. The assembly was going along well until we realized we were missing some nuts and screws. We ended up going to the home depot and buying what we needed.

👤The set was easy to assemble and my husband thought it was a universal kit for different models. My husband is a big guy and my kids all pile on the bed to talk and there are no noises or snaps to indicate stress on the frame. Overall happy with the purchase.

👤There is a manufacturing defect. The package has a manufacturing defect. The metal slats that go across the cup are welded in place. There isn't a way to turn them right side up.

👤It's Sturdy, but doesn't like getting on and off the bed. We want to put some plywood over the slats because the supports aren't close enough.

👤It was easy to put together. I was very happy with my purchase.

👤Our bed has wood split on it. I was concerned about the strength of the wood frame. I bought a metal frame that fits inside my wood frame and it's very sturdy and looks like a wood bed. There is no movement in this frame. This was assembled in 30 minutes. I could have only used our mattress because the slats are close to the box spring. We have been sleeping on this bed for three weeks.

👤I don't enjoy writing a negative review on a product that is well-designed, but the manufacturer dropped the ball when it came to producing a quality product. In the screw hole in two separate areas, there is a tiny fragment of metal which prevents the bolt from being screwed where it is designed. I tried a power drill to knock off the pieces, but it didn't work. The bolts jutting out in the "finished" pictures are not securing the frame pieces to the other frame pieces. Two small pieces of metal can disrupt assembly. I'm getting a small file to smooth out the metal. Maybe steel. I was given the option to return the item for an exchange or a refund, but I didn't want to disassemble it, put the pieces in a box, and then take it to the store.

👤I have had a bed frame for a while now. I think it's excellent for the price point. I've been attaching workout equipment to it and sleeping on it, just putting it through its paces. It's very strong. I was worried that it would be a metal frame. There's enough room for things to be put away. It's pretty simple and awesome. It's the perfect height off the ground, that's a bonus. This is the type of bed frame that I would like to have.

4. Platform Mattress Foundation Headboard Footboard

Platform Mattress Foundation Headboard Footboard

Their service has a 2 year warranty and 100% service satisfaction. If you have a question about the metal bed platform, please contact them. Reliable metal slats are designed to support and extend the life of your latex, memory foam or spring mattress without the need for a box spring. All-in-one mattress support frame foundation with built-in headboard and footboard. The standard Spring mattress is great for memory foam and latex. It's easy to store enough storage space off the floor. You could put some boxes under the bed to keep your stuff organized. Good quality metal frame, strong steel tubing construction, and full-length guardrails. A safe design with 6 legs contacting the floor. There are dimensions. The detail size of the twin size bed frame is 77.2" x 35.6" x 12.8" The under bed is taller than the rest of the room. You can easily assemble in 30 minutes with the help of the instructions in Easy to Assemble. If you have a question about installation, they will reply with details. The best crowd for average weight people is 220 lbs. A great gift for a dorm room. bedding, comforter, sheets, pillows, and box spring are not included.

Brand: Gime

👤Yes! This is the best purchase I have made in a long time. I was expecting a Walmart level bed frame, but it was beautiful. The assembly was very easy. That never happens. My 8 year old was able to assemble himself. The bolts and washers were in a box that had a big bag in it, and there were 2 more bags with the parts labeled. Next level thinking! I bought the cheapest bed frame I could find, and I expected to receive some crappy stuff with terrible instructions and missing parts. I was surprised or happy. I also ordered one in white. Might get a few more to gift.

👤Just put it together. The metal frame makes it easy for the mattress to slide around. Since this is for a 4 year old, we have a guard up that will hold it in place. It's great for small places. The 8 inch mattress is shown. There are pictures to show storage space.

👤You will put it together if you don't know Jesus. The bed frame is the worst. The legs that are underneath the bed won't tighten so you will have to be careful. My 15 year old daughter put it together for my 8 year old son and it took less than an hour after she figured out she had to change the frames. It's 7a and 7b. It is amazing when it is put together. It's not made for jumping on the bed, but it should hold up well. He has enough space under his bed to store his toys. Hopefully it will hold up.

👤My mom gave my kids a twin bed frame as a gift. We were both worried that it would be flimsy. They are strong. Assembly was easy. Once you get past the instructions. The first bed was assembled in 40 minutes. It would have been quicker but it took a bit to get used to. 2 of us got the job done at a steady pace, which would have been slower if there was only one of us. The second frame was put together in 30 minutes. We didn't need instructions for the second round after assembling the first one. Some of the metal slates/bars that support the mattress came at the little tabs. This was slightly annoying but nothing that a hammer couldn't do. Everything is assembled with a key. It's nice for that. Since it's a small room, we can store things underneath the beds, which is nice. Purchase a non slip/ anti skid thing to place under the mattress, like the ones you place under rugs. The mattress slides on metal bars, but we can fix it with one of those. I think the packaging is terrible. All the metal parts are put into a box. There is zero racquetball or chess. The smaller box was thrashed around in the larger box, which explains why some parts were warped/bent. Both beds arrive in mangled boxes because the box couldn't handle all the pounding. The boxes were ripped open and one had a huge tear. Improve your packaging! I took one star away because of that. It's a great bed if you don't get a damaged one. Especially for children.

5. Zinus Lorelei Platforma Metal Platform

Zinus Lorelei Platforma Metal Platform

The metal frame looks great on its own or as part of a pair in your guest room or kids' bedroom, with its sleek and compact silhouette. Under bed theft. The under bed space on this platform is perfect for storing extra odds and ends. Reliable metal slats are designed to support and extend the life of your latex, memory foam or spring mattress without the need for a box spring. It takes less than 30 minutes to assemble with all the parts, tools and instructions in one efficiently packed box. The mattress is sold separately and supports a maximum weight capacity of 350 lbs. The mattress is sold separately and supports a maximum weight capacity of 350 lbs.

Brand: Zinus

👤Here's what you're doing wrong if you think the slats are too short. When you put the middle bars in, don't push one end all the way up against the bed frame and then screw it in on one side. It won't fit the other side if you do that. The middle bars should be in the center of the frame. It won't look or feel like it's sturdy yet, but it will after you put the screws. Put your screws in on both ends and screw them in just enough. Take turns on one side and on the other side. The middle bars will fit just fine if the screws' threads are pulled tight. The other slats will reach across once the middle bars are tight. I was about to call customer service when I realized what I had done. I hope this helps someone else out.

👤I'm a huge islander. The bed frame supports me. I assume the frame likes me because I haven't received any restraining orders. It received 4 stars instead of 5 because of this. It was easy to put together, except for some of the work that was less than standard and required new holes to be drilled. Every single person in my family knocked their shins on it after we put this together. It's funny if you're the first person.

👤My budget is limited because I'm a college student. There are only a few things to say about this bed. The price was within my range. It was easy to build and took less than an hour to build. My mattress fit perfectly. It's minimalist design allows for plenty of storage space beneath it. Highly recommend!

👤I love how cheap it is. The metal is strong. It was easy to set up. If you can read or look around the bars you can see that some of the bars aren't reaching, that's surprising to me. You just have to read the instructions. Trust me. The frame is great. I have a mattress and box spring. I prefer a box spring, you don't need one. The bed frame is strong. I have had 4 cousins that weigh more than 120 pounds each, and a dog that weighs 175. The bed is strong. The bed has a lot of space under it. This bed is recommended all around.

👤It was easy to put together. Don't tighten everything before you get it put together, take your time. Don't strong arm it so tight you can't get it out of your head. The device that comes with it is very generous. Thank you for the tool. The box was easy to open. I put the bed together quickly. I put it together after I was hurt and sick. The average person will take about an hour and a half. If you have helped, you will probably get it done quicker. The stickers are easy to pull off, and the black is solid. If I have to move, I'm tempted to leave them on. It's easy to move. You can store stuff under your bed if the height is good. I don't recommend that. If you live in a small room, you will. 2 or 3 people can sit on the bed, and it won't break. The average weight is 100-150 pounds. I would recommend this product to my friends and family. It's nice not to have a box spring. The bed is not low. I was afraid of that. If you have bad knees, you want a slightly higher bed. This is fine for most people. I had to change the rating to three stars because the bed keeps slipping off the frame if you put the tire bed against a wall on the long side. I have to adjust to it all the time.

6. SmartBase Mattress Foundation Replacement Headboard

SmartBase Mattress Foundation Replacement Headboard

The Super Heavy Duty SmartBase is the only bed frame that can support more than 8 times the weight of a traditional platform bed and is ideal for cosleeping families and plus-sized individuals. No box spring is needed, as the platform is made with sturdy steel that replaces your box spring, allowing you to rest your latex, memory foam or spring mattress directly on top. Storage room for extra odds and ends is provided by the total of 12.8 inches of clearance space under the frame. All sizes can support up to 4400 lbs, and the box requires no tools for assembly. If you want to add a personal touch to your SmartBase bed frame, you can use the simple-to-use headboard brackets. The 14 inch SmartBase is not compatible with 10, 12, 16 or 18 inch versions. Heavy duty steel brackets are used to attach a headboard and footboard to your SmartBase. Assembly can be done in a few minutes with all the bolts and tools included. Assembly can be done in a few minutes with all the bolts and tools included.

Brand: Zinus

👤The foundation mattress that was advertised did not come with the headstand.

7. LX 18SN06 V1406 UP Support Deluxe

LX 18SN06 V1406 UP Support Deluxe

The Standard Bed Frame had 2 legs added in the middle in order to upgrade the support for your mattress. Its height is 18 inches tall. Plastic Floor protectors are applied at the bottom of the legs, there are no scratches on the floor, and plastic protectors on the top of the legs prevent bumping into sharp corners. The mattress is encased by a 5mm deep frame and Metal slats have double-sided tape to keep it from sliding. When you turn and throw in sleeping, the plastic cover on the slats does not make noise. You have enough space under the bed for your storage. Please remove the upper strip from the Slats. Please remove the upper strip from the Slats.

Brand: V&lx

👤This bed is very cheap. It's tall enough to hold a lot of stuff. My boyfriend was assembling the frame. I used a piece of plywood from Home Depot for my previous bed and a thin mattress, which I used for this bed, and I feel comfortable. I don't know if I would feel the slats without the piece of wood. The bed is sturdy. I haven't moved around in it yet, but I'm pretty sure it's sturdy.

👤I bought this 4 months ago. I feel like I've owned this for a long time. I was able to do it by myself and it was easy. Get a boxspring first. I have a recurring problem with the bars popping out of place because the plastic bit holding the bar broke and the bar itself has a good curve to it, because a wooden plank is something to give extra support. I'm 200 lbs so if you're buying this for a kid or lighter, you might not have the same issue. Expect a lot of creaking after a few weeks. If you live in an apartment with other peopl, don't use this for a while, it can't handle two people if the bars are not bent. I'm a heavy sleeper and single so this doesn't affect me much. This is an amazing bed that can be used for storage. I'm able to put anything I don't need in a box and not have to worry. It's a good height. If you get a box spring or a way to reinforce the bars, this would be a good cheap bed frame. I broke the bed. Maybe you don't buy this.

👤It is easy to assemble, but it is not easy to move after you put it together, and it tends to bow if you do move it. It can't be moved across the ground because the legs will bend. It is tall so you can fit a lot under it. If you try to move the mattress after sleeping on it, the sticky grips will rip it off, but they are single use. Doesn't make noises.

👤It's very easy to assemble and sturdy. I like this frame. I just bought a king to upgrade from a queen version. It stores a lot. The space saver trick is great. This frame is very good.

👤The frame was only used for a couple months. It is very high from the ground, so there is plenty of room for extra storage and for our dog to hang out. We tried spray painting it but it didn't come out as we wanted it to, but we think it's still better than the black. Sometimes we feel like the mattress might collapse, but it hasn't yet, it feels secure on top, and the textured slots hold it well. It works as advertised.

👤I'm very happy with my purchase! I was able to store a lot of bins under this bed. I have a memory foam mattress that works well. Even after adding a bedskirt, my mattress can slide. The frame is more important than the mattress. I think this was a great choice. The amount of under bed storage for this price was a win.

8. Olee Sleep Platform Mattress Foundation

Olee Sleep Platform Mattress Foundation

The metal bed frame is strong and sturdy. The dimensions are 79.5 x 75.5 x 14 inches. All hardware, tools, and instructions are included in Quick and Simple Assembly. The wooden slats have tape on them. 13 inch under bed storage space is space efficient.

Brand: Olee Sleep

👤The frame is perfect for my room. There are clear instructions. All pieces are labeled. It is easy to assemble. I completed the task on my own. Very strong. There was no movement on the bed. I was able to attach my bed without assistance. I will be buying another one soon for my spare bedroom. The under bed storage height clearance is 12 inches due to the railing and the frame is 14 inches. The 14 inch baskets do not slide under my 12 inch bins.

👤You would think the frame would be strong. Adults are on a king size bed. We were sleeping when the bar snapped in half. Terrible quality. Lasted 2 months. Save money.

👤The wooden slats are so cheap that I was afraid to lean my elbow on one while assembling it, and the bolts are so soft that several were stripped just from using the provided allen wrench.

👤This was the easiest bed I have ever put together. The bed is very sturdy and the parts were quality. The wooden slats were put together using a system of pulleys, so you just rolled them out and put them in the right spot. It was nice to have no screws or nails in place. This was the perfect twin bed for underneath my son's loft bed. When the bed arrived, we were missing one piece. We called the manufacturer and they responded quickly, and the part was at my door in 3 business days. The bed was great, but the customer service received from the manufacturer exceeded my expectations. I was very happy with my purchase. Thanks!

👤The first bed frame we bought was for our house. We have a king. I put it together myself. My daughters room was where this queen was located. It went up quickly. It is important to keep in mind that it is metal. It's important that the corners are 90 degrees to get an easy fit. Once the 90 degrees is met, it slips in easy. Would buy it again. Oh, I did!

👤I put this together myself, I am a 72 year old woman. It was very simple and sturdy. The instructions were easy to follow and the very thing needed was included. Thank you. I love this bed frame.

👤Excellent quality and sturdy. It was easy to put together. It was very easy to put it together. I am very happy with this purchase and I highly recommend it.

👤I don't think the manufacturer's fault is that each end of the metal frame gets warped or damaged during shipping, but their packing could have prevented it. It is easy to install if you know what to do. I give it a 4 star because of the price.

9. Zinus Compack Adjustable Spring Mattress

Zinus Compack Adjustable Spring Mattress

There is a center bar and 9 legs. Steel construction. For use with Box Spring and Mattresses sets only. The leg design is for safety. Simple, strong, and quiet. Simple, strong, and quiet.

Brand: Zinus

👤It is easy to assemble. The box arrived in good condition and the frame inside was wrapped in plastic wraps with zip ties. The assembly of the frame took about ten minutes. I didn't need any tools at all. The step-by-step directions were easy to understand and displayed a number system to assemble the frame. It's very easy to put it together. The large round legs add stability to the frame. The distance from the floor to the bottom of my box spring was roughly 6.5". I wanted a frame that didn't raise my bed too high off the floor and this frame is perfect. The frame is very sturdy and very affordable. If you're on a budget and looking for a really strong frame, I highly recommend this one.

👤There were no missing or bent pieces when the product was shipped. If you want to order the California King sized frame, you should spend more money somewhere else. The box-springs that support the mattress can't fit with the brackets at the foot of the bed. There are no borders for the head of the frame, but there are borders for the foot of the bed. We had to remove one corner so we could put the box-springs under the mattress. There is only one thing on the frame. The mattress is big and heavy, so there isn't much movement. It gets the job done if you don't care. I recommend having some kind of support. The design of the mattress allows it to lose some of its support when sleeping. We did not return it. We still use it. The frame would be replaced if we had a better budget.

👤I went to screw the last leg and it came off. The screw on the leg broke easily. I can't believe that the screw that holds the bed frame to the leg can break. I saw that Zinus responded to the reviews with a customer service email. I got an automated reply saying they will get back to me after I sent them an email. It was weeks ago.

👤Solid bed frame. The corners are rounded rather than the metal frames that take a toe off. It's nice and solid, which is important because my husband and I were piling 500 lbs on this frame at night. The frame takes up less room than the old sleigh bed, and there are no creaks. It's easy to set up, and if we upgrade to a king in the future, we can still use this frame. I appreciated how clean the frame was. Rounded legs for the victory.

👤Just a few comments, so far so good. We wanted to use it in other rooms or give it to friends and family so we decided to purchase a bigger frame so that we could use it in other rooms. We are leaning towards keeping it. The middle leg on the sides will get your foot if you are not used to it, so we are probably going to cut the legs a few inches to get the height down to what we had before. We currently have towels wrapped around them, but are looking for something that looks better, or at least temporary, until we get used to that leg being there. I don't think it took 10 minutes to setup. The Vant leather panels will be used as a headboard treatment.

10. Best Price Mattress Metal Platform

Best Price Mattress Metal Platform

No box spring is needed for the platform bed. Heavy duty steel is used in the construction of this durable and noise-free construction. There are additional legs and a center bar. The under bed storage space has a vertical clearance of 16. Easy assembly with no tools required. Easy assembly with no tools required.

Brand: Best Price Mattress

👤It has been about six weeks since I put this bed up. The directions went to the point. I put this bed together by myself after listening to music. I am happy so far. My kids will jump on it. I have a boyfriend who is 270 lbs. No issues!

👤On Friday, I got my order on time and started to assemble the frame. You don't want to happen when you are two steps from being done. One of the parts was so short it was impossible to fit a screw into it. I was offered a replacement. I was upset and rejected it. You have to pack the dam again and take it to the office as if you have nothing else to do. I've bought structures to assemble many times in the past. Good luck.

👤Garbage. I waited a week for it to arrive and all corners are bent and the legs are broken.

👤Don't be alarmed. It looks like it is on the picture. It is not. I am average weight and it's squeaking loud while I am on it. I'm already regretting this purchase.

👤I've had this for a month or so and it's been great. I put it together myself. The setup took about an hour. The instructions were easy to understand and the pieces were in perfect condition. During adult activities, the bed is very quiet. I have a memory foam mattress and I've found that the bars are too close together, I'm going to purchase a bunkie board or something to go in between the mattress and the frame for added support. I don't want it to get worse because it's sagging between the bars. It seems to hold its weight. I have a combined weight of 410 lbs and a memory foam mattress.

👤I bought a king. I had to disassemble the old bed before I put this together. My husband did that part for me, and he had all the pieces of the new one ready for me. I used a screwdriver bit in my drill to fit the screws. It took about half an hour to put it together. It was very easy to use the drill, instead of the key tool. This thing is sturdy and our combined weight is over 400 pounds. There was no noise or squeaking. The mattress and box springs fit perfectly. I feel like I bought a quality product.

👤I'm surprised no one else has pointed this out. We put our frame together and laid it on. The slats are so thin that your mattress sinks between them, causing a very bumpy surface on which to sleep. The fact that this is advertised as "no box spring" is a misrepresentation. If they think you can put your mattress directly on it, I would not recommend anyone. It's easy to assemble, and gives good storage underneath, but many other solutions do as well. If the issue is not resolved by a sheet of plywood between the frame and mattress, then it will be returned.

11. URODECOR Headboard Footboard Victorian Foundation

URODECOR Headboard Footboard Victorian Foundation

It's easy asSEMBLE. 5 year warranty guarantee, no tools required, easy to assemble. The bedstead has a fashionable appearance. The retro pedal is in perfect match with other furniture. The four slips of the panel can be used to keep the mattress from moving. The mattress is not provided. The method of welding platform structure and using fix screw is adopted in the design. The rubber strip in the middle of the bed plays a role of buffering and reducing noise, preventing the sound of the steel pole hitting the bed. You have no worries with a five-year warranty and free replacement parts. The package is easy to install and includes all the parts you need. It's very easy to install. Storage space under the frame is 13 inches, which gives you more space for you. There is a maximum support of 660 lbs.

Brand: Nachtimoor

👤I can't beat the price, it's exactly what I was looking for. It took around an hour to set it up. I noticed that some reviews had the bed on a hard floor without a rug, so we put a rug underneath and have not had any issues. I like the dark copper color of the metal.

👤We love this bed so much. It's easy to rearrange the room when I'm studying.

👤The bed is amazing. I am very happy.

👤I have a 9 inch mattress that is perfect for me. It would be too high if I added a box spring. It's great with my 9 inch memory foam mattress. Make sure the bed is tight when you put it together. I'm in love with this bed. This was a great purchase and I am very happy with it. It's very strong. We need furniture that is going to be used daily and that is metal, so we purchased this frame specifically. I wanted it to be easy to take apart and put together. The bed frame is it! It took about an hour to do it by myself. The price for something that looks nice, easy to put together, and built is amazing. You couldn't ask for more. I am very cautious of buying furniture online as our last bed frame failed to hold up even a year, but I am pleasantly surprised at how sturdy this frame is and I am worried about squeaking. If that happens, I'll update my review. I would recommend this to friends if I purchase it again.

👤It was easy to put together the frame. The iron was perfect because I wanted it to have a little contrast in our room which has a lot of wood. If it is on wood, I would suggest putting something under the legs or putting it on carpet.

👤My daughter put this bed together. After sleeping on airbeds since Hurricane Florence, it was wonderful to finally sleep on a normal bed. The metal slats are very strong and easy to install, thanks to the included parts and tools.

👤It was shipped in two days. It was easy to assemble, even without the best instructions. The price is very reasonable. You need a box spring with this bed to make sure the bed sits higher.

Summary

What is the best product for platform bed queen frame 18 inches?

Platform bed queen frame 18 inches products from Lotcain. In this article about platform bed queen frame 18 inches you can see why people choose the product. Homus and Comasach are also good brands to look for when you are finding platform bed queen frame 18 inches.

What are the best brands for platform bed queen frame 18 inches?

Lotcain, Homus and Comasach are some of the best brands that chosen by people for platform bed queen frame 18 inches. Find the detail in this article. Gime, Zinus and V&lx are also brands that their products are worth to check.

You May Like

Share Your Story

Your name:
Choose product to comment:
Write your review:
By submitting this review, you are agree that:
  • Your review is based on fact, honest, polite and not harmful to anyone or any brands.
  • We have full right to show or not-to-show your review after moderation.
  • No spamm please :)
Disclaimer
We might earn comission for your shopping via our links, it doesn't cost you extra. This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com