The wood material is PREMIUM. The furniture risers are made of the highest quality wood on the market. The furniture risers are built to hold up to 2,000 pounds. Plastic risers are fragile and less durable than built to last. It's on. The most foul is. These wood risers can be used with most home furniture legs and can fit securely on bed frame legs, couch legs, folding table legs, cabinet legs, and more. Their sofa risers come with a pack of felt pads to protect your floor from scratches and dents, and they are also safe on wood and ceramic floorings. The perfect weight level. Extra storage space is added to allow easy robot vacuum cleaning underneath. Premium furniture risers give additional elevation to low sitting furniture to a safer and more comfortable height level. levating worktables reduces backaches and pain. The design is experimental. The wooden riser is designed to complement any style. These risers are a great match for wood furniture and wood floors. Prime Woodcraft appliance leg risers are perfect for home and office use. If you want to prevent damage to your furniture, these wood risers are a good solution.
👤Exactly as described. Solid wood. Well done. I usually don't leave reviews for simple stuff like this, but when Amazon has third rate stuff in this segment I'm happy to add a positive review to help the guy who made these sell a few more.
👤The colors on the wood stains are very different.
👤Exactly what I wanted to raise the height of my desk.
👤They arrived quickly and are perfect for what I needed. I would have bought the taller set if they had been available in 1.5 inch.
👤Our sofa was lifted by these little sofa leg furniture risers. You don't feel like you're sinking into the couch. The sofa legs were well made and fit perfectly. The color wasn't consistent so I gave 4 instead of 5. Two wood were lighter in color than the rest. The skirting hides the color flaw and we put the discolored ones to the back if they weren't noticeable. If the legs were not showing, it would be more of a problem.
👤I love my desk but it doesn't have much leg room. I've been thinking about getting furniture risers but wasn't sure what kind until I read a review on here from someone who used this item for their desk and was pleased with the results. This product gives me an extra inch of leg room. They are bigger than I thought, but they get the job done so I can't complain. Very strong.
👤I was given an antique cabinet that was perfect for our sitting room and it was located over the heating/AC vent. The heat is on in the Northeast as the cold weather begins to descend. Even though the risers don't match the cabinet, it still performs the function I was looking for, because it is 1 inch up off the floor. A felt pad is included on the bottom of the risers to protect the floors and make it easier to move. I am very pleased with this product.
👤I used to elevate my sofa. They blend in with the legs on my sofa. It is made of very solid wood. My sofa is on a carpet so the risers are not on a level surface. The sofa slides a bit when you sit on it. I hope the sofa won't fall off the risers. I think it would happen with the risers on the carpeted surface.
👤I had to remove the bent out of shape front castors of my leather armchair. It's surprising that a chair with no back legs can be very uncomfortable because of the drop in height of the front legs. You would find yourself sliding forward to the edge of your seat. I tried these wood risers instead of replacing them with other castors. They made seating in my armchair more enjoyable by doing the trick immediately. The risers increase the height of the legs. In a perfect world, they would have bee higher, but I have no complaints as they were advertised as such. Many other brands of risers are either ugly or expensive. These were perfect in every way.
The size is 3.3X 3.3 Inch. The internal increase is 2.75 inch. The total height is 3.9 inches. Adding storage space under beds and furniture makes cleaning underneath furniture easier. Lifts heavy bedroom, living room, and home office furniture to a better height that provides a safer advantage to the user. There is a set of four. Raises beds, couches, armchairs, desks, sofas, and other heavy stationary furniture height 3.14 inches to assist the sit to stand process and boost ergonomics.
👤The item is so pathetic that it is hard to believe. These blocks of wood have been saw cut, dried glue on the bottom and sides, and stapled to the floor. One of the four is a rhombus with a giant crack in the middle. This is not holding together. I can't take pictures due to a broken phone camera, but I know that this is highway robbery, and you can charge anything more than 4 dollars for this product. This is what I get for not making my own.
👤I wanted to raise my nightstand since it was too short. I didn't want to destroy the wood. These bed raisers are pretty good. They are a piece of wood painted white. I can't complain since I was looking for something like that. I attached some velcro to my nightstand and it worked well. The felt pads were added to protect the floors. It was pretty good.
👤I received three risers and my bed only needs them.
👤I was surprised by the quality of these and how well they worked for my platform bed frame. I was expecting ikea quality and got a lot heavier wood. I needed a small boost so I could store things under my bed but not lose the platform style and these worked perfectly for a bed frame without legs, they were easy to rest the frame on and large enough that I don't need to secure the frame further. The wood bed risers were a perfect match for all the other wood and metal room decor. Would recommend!
👤The unfinished risers were ordered by me. I painted them with a spray primer and paint combo to match my nightstand, which I needed to raise up a few inches. I used gorilla glue to glue the nightstand to the base. I put them down and let them set for 24 hours. I removed the rubber feet at the bottom of the nightstand before I glue the risers in order to create a flat surface. I was careful not to put too much pressure on the risers so that they wouldn't pop off when I turned the nightstand back over. Everything turned out perfect. It looks better now than it did when it came from RH. If you don't glue them, you will end up with a wiggle problem.
👤The above picture shows a block that holds my incomplete couch. I should've looked for the tiny riser in the description. It's only a few inches tall. I bought this item because my elderly parents can't sit on my couch because it's so low. I don't hold it against the product since the dimensions are listed. If you only need a small amount of lift under your furniture, this product is solid and I would recommend it.
👤This was bought for a bed frame. I needed to raise the bed a few inches without messing with the frame. I was going to cut some wood and screw it on. I wouldn't be able to add anything on the bottom of the bed. I bought these and they did the job. It looks very sturdy and will last a long time. I recommend buying furniture feet or protectors that will not scratch your flooring. If the furniture moves, they have a chance of sliding out, so I recommend attaching them to it. I have no issues with the mines I screwed in.
The height of the furniture risers is 1.2 inches to assist the sit to stand process and boost ergonomics. The design is made of Carbon steel and non-woven fabric. Protect floors and carbon steel bed lifts. It makes cleaning underneath furniture easier because of the additional height and storage space. It's easy to use, just peel off the back cover of the risers and stick on the furniture legs. 4Pack Furniture Risers are high in height and width. There is a 100% crack free warranty on Amazon. Other risers crack easily in spite of assurances and that has become the highest rated complaint of consumers but Ezprotekt risers offer 100% warranty against cracking and have been tested to hold over 5,000 pounds per leg.
👤The item description states that it is 1 1/2 inches. These are only over 1 1/2 inches, so not sure which Chinese math was used to measure them. It is possible that the felt pad and adhesion pad will compress in very short order, which will leave you with one INCH of rise. I needed 1.5 inches of rise to measure my chair. These seem to be made well enough, but how difficult is it to measure them and then clearly describe them?
👤Good quality. Nice look. Very strong. I needed to lift a TV table so my robot vacuum could get under it. There is a piece of metal with felt on one side and a sticky pad on the other. These work are perfect for my living room and would be sturdy for a lot of heaver items. The legs of the table won't slide around because of the sticky pads on the risers. I felt the sticky area on the tops after mounting the table on the risers. That way dog hair and dirt won't be visible on the top surface. I will order again after I am very pleased with these.
👤This isn't too heavy. It doesn't interfere with the trundle so it doesn't stick out. It was quick and painless to deliver. The color is a shade lighter than my kids bed, but it doesn't stand out. That was good.
👤We ordered a very expensive bar-table and beach scene. It is very heavy. I ordered it to be the same height. I measured a small wine cabinet and wine cooler to fit under it. The wine cabinet and cooler no longer fit because of the metal bar that ran under it. I ordered the risers in hopes that they would make a difference. Everything fit after we attached them. The plan was saved by them.
👤A bare floor probably makes a difference in the experience of the product. The risers are working on the floor. I waited to review to see if the plastic would break, but it hasn't happened yet. The carpeted floor is helping to prevent my metal bed frame from sliding off, but the glue is helping to keep my bed frame from sliding off. I didn't think about how the risers might sink into the carpet when I got the shorter set. They've given me an allowance to slide more things under the bed, but I probably should have purchased a taller set.
👤They look better in pictures than in real life. I thought they had tape on them to protect them from being scratched in shipping. That's just how it looks. It looks like I have rolls of tape around my footstool. I don't think I'm in to. Not my vibe. Scottish, Scotch, not so much. You can't see them because I pushed them back on the bench.
👤I bought these for our recliners to stop the Roomba from getting stuck. They do what they are supposed to do. A+.
👤I bought this to lift up my desk's Ikea table so I could add lights to it. Works well. You just have to remove the soft padding and add some rubber tape to keep the table from moving.
If you have a question after purchasing or need installing/using guide, please click "ASK SELLER" and they will be happy to assist you. There are stirrups to fit all of the hair. With improved ergonomics, strength, and durability, they have launched 5.5 inch wide jumbo risers for large legs with only 3 raised walls, allowing you to slide a leg onto the rise. This riser is compatible with all types of furniture. The patent pending oversized furniture riser comes with a rubber bottom and leather pad to protect the legs from slipping. Lifts over 6,000 LBs per leg are easy to raise couches. The design has a 6in diameter of the top stack and can fit up to 5.5" legs. It won't crack like other risers if you stack up to 6 inches. To increase the elevation, the chair risers are designed with stacking engineering to securely stack the heavy-duty riser on the additional riser to safely handle the weight. Quality products that are registered and trustworthy. Thousands of happy customers trust and review the home products brand. They listen to your needs and concerns to develop and design the products. They go beyond the call of duty to make you happy with their customer service. Quality products that are registered and trustworthy. Thousands of happy customers trust and review the home products brand. They listen to your needs and concerns to develop and design the products. They go beyond the call of duty to make you happy with their customer service.
👤These pictures don't show how much higher the risers make the sofa. It is better than before. It has been difficult for me to get up from the sofa because of my Fibromyalgia. This little bit helps a lot. Very pleased with the quality. The sofa has been pretty good so far. $30 is the best I've spent in a long time.
👤I'm 80 years old. Put the risers under the couch so it's easier to get up and answer the doorbell quicker. What a great purchase!
👤It's perfect to add some height to our bed frame. Our frame has a beam across the bottom and the tree sided edges were helpful. Our bed does not move and feels very sturdy. The rubbermaid boxes can be slid in the under the bed.
👤They would have saved me from months of trouble if I had known about them sooner. I had a hip replacement and had difficulty getting up from my chair. I didn't want to get rid of it. Finding a higher chair is difficult. It is more comfortable because I can sit in and get up from there. I like the rubber bottom on these. They don't slide on the floor. They are not heavy. The smaller set is for my loveseat. Great product.
👤This was what we needed. We moved the old sofa to the basement so our daughters could hang out with their friends. When we get a little water in the basement, it's necessary to put it up on risers. Standard risers were not good because the legs were thick. The big ones are perfect.
👤I got fat and old so my rocker recliner got too low. The risers look gaudy, but raised me. I am more level with my knees so getting in and out is easier. The legs of the rocker fit better with this version that is on one side of the top. The rubber pad on the bottom is very sturdy and the top has a bit of leather to prevent sliding. I recommend them. It was easy to install if you had someone to tip or lift the rocker. Whatever furniture is available. I had to lift and slide it on my own.
👤There is an AC vent under the drawer that sits low to the floor. We had to work with what we had since there was no other choice. The ac was not getting into the room because of the vent divertor. I decided to give these furniture lifters a try because I knew Amazon had something that would work. I have a lot of furniture and we had to lift it and put it on the furniture lifters. We're going into the bedroom after that. Thank you Amazon for carrying this product.
👤I like these but they are expensive. These are very strong and support my bed. I bought 12 to get the height I needed. There was a foot base on both sides of the Headboard. I left the hollow sides to support the foot of the headboard when I turned two of the feet to face each other. It worked out perfectly. I would have made my own for half the price if I had the time. When you work in healthcare, you just go with it. I can't have the dogs on the bed with me.
Raises beds, couches, armchairs, desks, sofas, and other heavy stationary furniture height 2 inches to assist the sit to stand process and boost ergonomics. The design is made of Carbon steel and non-woven fabric. Protect floors and carbon steel bed lifts. It makes cleaning underneath furniture easier because of the additional height and storage space. It's easy to use, just peel off the back cover of the risers and stick on the furniture legs. The 4Pack Furniture Risers have a width of 3.15 inches and a height of 2 inches. There is a 100% crack free warranty on Amazon. Other risers crack easily in spite of assurances and that has become the highest rated complaint of consumers but Ezprotekt risers offer 100% warranty against cracking and have been tested to hold over 5,000 pounds per leg.
👤I have a large sectional couch with 8 plastic, flat bottom feet that are oddly wide and triangularly shaped. This made finding compatible risers difficult, but I'm happy with how they turned out. Make sure you thoroughly clean and dry the bottom of your furniture's feet before applying the strongest and most secure attachment. If you want the felt bottoms to be firmly planted, you can add something rubber to them.
👤My bed has 6 support legs so I had to purchase two packages. The risers came from under the bed legs after the glue loosened. I have to remove all of my furniture from my bed. The storage space they provided was lost.
👤These are amazing. I put them on by myself and you can have a helpers if you want.
👤I looked for risers that were round and added 2 inches to the table's legs. They are hard to find. My table legs are round, and most risers are square. I was thankful to find these because I felt like I might lose my toe. The risers are not cheap. The bottom is felted and the top is protected until ready to use. The sticky side was strong and held its shape quickly. My table is heavy. I was able to get it back into position with the felted bottoms. I would recommend this product to anyone, it's easy to use and looks good.
👤I was not sure if they would work because they stick onto the legs of the furniture. The paper was very sticky when we pealed it off. They are very stable and easy to put on the couches. The look is good, the legs are good, and the height is perfect.
👤The horseshoe design of the table legs made it necessary for me to use 6 risers. The fit was perfect and the support was excellent. The table is very sturdy and the risers blend nicely with the table legs. It was still worth it since these are great, but I wish the option to buy 2-packs or 4-packs was available.
👤A great tool to raise furniture. I needed to raise my table after buying a new office chair. I put two of them on my table. The video has a lot of information.
👤We had to lift a large cabinet up to make it a more usable piece for serving a holiday dinner buffet. The extra 2” in height really made a difference. The blocks held the weight with ease and were a perfect match.
👤I raised my sofa bed. It's made a difference. They arrived on time and were advertised. The biggest challenge was lifting the sofa. I used my car scissors jack to lift each side. It worked out well.
The furniture risers raise beds, couches, armchairs, desks, sofas, and other heavy stationary furniture height 2 inches to assist the sit to stand process and boost ergonomics. The design is made of Carbon steel and non-woven fabric. Protect floors and carbon steel bed lifts. It makes cleaning underneath furniture easier because of the additional height and storage space. It's easy to use, just peel off the back cover of the risers and stick on the furniture legs. The 4Pack Furniture Risers have a diameter of 2.5 inches and a height of 2 inches. There is a 100% crack free warranty on Amazon. Other risers crack easily in spite of assurances and that has become the highest rated complaint of consumers but Ezprotekt risers offer 100% warranty against cracking and have been tested to hold over 5,000 pounds per leg.
👤I bought the other plastic raiser first, but found the Plastic riser were mostly designed for the bed and sofa. The Steel riser is perfect for me because I want to raise my L-Shape desk. The small size makes it look out of place, and it is made with steel so it can hold more weight. The desk doesn't need to worry about the smaller leg.
👤The furniture lifters count on the glue to stick them to the furniture. I was wary of using the included tape. I drilled holes and bought lag bolts to attach the metal extenders to the wooden feet on the couch. The modification works well. I am confident that they will fit on the couch, and fortunately, they do. They provide a comfortable rise. I highly recommend them, but am hesitant to suggest that they would work as well, using the glue that is included.
👤They should have been smaller to match the legs of the accent chair. They were sold as an add-on. I put them on the bottom of my chair. It looks like my chair is made of wood. I didn't like it. I searched for the smallest ones and thought they would work. They are great for a bed, but not for a chair with exposed legs. Sorry.
👤They are being used on bookshelves to raise them off the floor. The air vent under it would not be blocked. I dragged it rather than lifting it off the floor, as it popped off. It hadn't been on for a while and the glue hadn't fully worked. I put it back on and have not had any problems since.
👤I was able to raise this small desk thanks to the risers. Replacing the desk was not an option for this family. It's easy and cheap to fix.
👤I have a cocktail ottoman that has high legs. I liked it. It was too high to use. I replaced the legs with these and they were perfect. We have no problem moving the ottoman because it isAdhered fine, easy to use, and we have no problem with it. I am happy to have found these.
👤I liked the way they blended in with our loveseat skirt, but they wobbled and we could not keep our loveseat from tipping over when they did not adhere to metal slides on ends of the tapered legs. These are only good for square shaped legs without metal slides. It was difficult to adjust. Not good for us.
👤I put them under a bed. I was worried they would move when I moved the bed, but they stayed put. The minute you put the bed leg back down on them, they will not goin' nowhere. Excellent glue. Excellent buy. They don't stick out like a sore thumb. I have a wood bed with a shade of walnuts and oak on it.
👤Strong support. The areas that need to stick are what can tear the paper.
Quality products that are registered and trustworthy. Thousands of happy customers have reviewed them and they are a trusted brand. They listened to your needs and concerns to develop and design the products. They go beyond the call of duty to make you happy with their exceptional customer service. Provides support to slide outs when extended. The height can be adjusted from 19-inches to 47-inches. Unique features include a fit top, space saving handle and tethering pin. The construction is made of strong, rust-resistant steel. Each supports up to 5,000 lbs. There are two supports included. There are two supports included. There are two supports included.
👤Great idea, but not really. During the rain storm, we had a leak from the slide because the RV had settled and the jacks didn't work. They pushed up on the slide too much and caused the water to pool against the slide and cause the leak. If you are in rainy conditions, you have to keep an eye on the RV. He took them off because he was so angry.
👤When we bought a camper with a slide, I was concerned about how well it would hold up against the weight of my fiancée and I, so I figured we would try these. I have used them many times and I really like them. They are easy to install under the slide. If you are camping in a place with a soft ground, I recommend putting a piece of wood under them to give the base a bigger footprint. I keep pieces of 2x12 in my possession and they seem to work well.
👤We bought these to help preserve the condition and operation of the 12-foot slide-out on a used travel trailer, but were told they probably didn't need them for the amount of time we use them. It's easy to use and provide additional support to the slide-out and the overall trailer. We can use the sofa and dinette areas in the slide-out without worry about their weight-bearing capacity or trailer movement. It looks like a good quality stands. Very happy with the purchase.
👤The whole 5th wheel is helped by them. It's easy to use and set up, but be careful how you handle them because the inside can slide out and land on toes. I'm very conscious about the weight I add to the camper and would like it to be lighter, but if that was the case they would be less sturdy and reliable, so it's not a big concern.
👤Needed something to support the slideouts. The product did the trick. It's easy to install. These supports could benefit from some design improvements. You have to "crank forever" to extend for higher applications. The plate at the top is not flat as shown in the picture. Getting them positioned under the rails can be a challenge. I have two sets that I installed a while ago.
👤It is easy to use and deploy. Even though the jacks are adjusted, the distance from the grade to where they fit under the slide out is shorter. I couldn't find a happy medium. I had to dig a hole deep enough to set a piece of 2X6 in the hole to compensate for the lack of room to install them at grade level, so if you're parked on a slab hopefully there will be enough vertical space to place these. I was hoping to get more stabilization when using these. The slide out is tight and steady, but the rest of the coach is not as stable as it could be. They are light and work well. They are a must have.
The ShoulderDolly doesn't make you stronger than you are without it. Back protection and steel toe shoes are always recommended. If you have physical limitations, do not use. The Shoulder Dolly Installation Guide can be found below. Aran 20 inch Gas Struts. If your project lid is between 85 and 110 pounds, this 100LB gas strut set is stable. The A and B lengths of the gas spring shocks are 19.7 and 11.300mm, respectively. C16-08084. The gas props are 20inch. If you want to install the replacement struts by hand, do not, it will only cause them to be compressed after installation. Aranca C1608054 The customer will use them on the tonneau cover, heavy camper shell roof, tv cabinet door, trailer window, compartment door, floor hatch, truck cover, bar shed window, heavy custom build lid, etc. If you have a question after purchasing or need installing/using guide, please click "ASK SELLER" and they will be happy to assist you. If you have a question after purchasing or need installing/using guide, please click "ASK SELLER" and they will be happy to assist you.
👤They were used for under bed storage. I built a frame out of oak to replace the flimsy OSB the RV manufacturer used. The bed was a little too heavy to hold up with the added weight of framing. We ordered 100lb struts because the factory used 80lb. There is just enough lift to open. They work well. Had to wait a few days for delivery, but saved a lot of money by trying to find the right ones at the parts store. Would buy again.
👤I wanted to write a review. I ordered the 120lb struts but was worried they wouldn't be strong enough to hold up the bed in my RV because I added a heavy memory foam top. I sent an email to the Ariana store about which pair of struts to use after I saw they also sell the 120lb and 150lb struts. The store immediately sent an email to me telling me to contact them if the 120lb struts don't work and they will send the 150lb struts to me asap. They have the gold standard for customer service. I was reassured that they would fix it for me even though I didn't need it. I am very impressed. They care about their customers and will go out of their way to make sure you are happy.
👤These are made to order. I will use them for all of my builds.
👤I had to order different sets. The first set was not strong enough, even if we attached them. Arana did not return the cost. The second set was 200 lbs for the two. It took us a long time to get them to open the lid. The door is around 100 lbs. It travels more than 90 degrees. The lid is heavy because of the asphalt shingles. Arana and Mina were great companies to work with. Mina responded to all of my messages very quickly.
👤100 lbs was not enough for what I needed. They work well, but are a bit stiff. I have a heavy fiberglass cover. These lifts have no effort. I think I'll save the 85 lbs for the cover and use the 98 lbs for the shed windows, it's a little difficult to shut.
👤I replaced the ones in my car's rear door. My door definitely opens and stays open now that it's slightly too much force. I measured what my door pistons are at the moment and then I calculated the force with leverage in mind. I was surprised they did not have nuts. I had enough of the nut that was needed. Put riveted doors in. I wish the ends were not plastic as they seem a little fragile while they pry the clips. The customer service was great, and I guess it should be fine since the force is always a push against the metal parts and the clips only really stop a pulling off force. I am not sure if I would be comfortable with the plastic ends if it was an application where someone would try to overextend them. If they are plastic, someone could easily push something hard, break them, and then fall on someone. It's amazing for the money, but I have a feeling that they may be a little more than 100 lbs of force. I almost took my entire body weight to compress one. Don't do this without taking off the ends.
It's suitable for coffee table, tea table, telescopic coffee table. Heavy duty steel construction, Hardened steel gears. This winch is constructed with high quality Steel wire rope and is solidly constructed with a safety pawl. Flexible design for adjustment is what the design is about. Excellent Load Lifting Facility is designed to provide a mooring hook with a safety haz. The small portable size won't take up much space when used. The two-way ratchet is equipped with a safety pawl. It's ideal for lifting heavy objects, drag boats, or volleyball net. The comfort grip reduces hand fatigue and the handle length makes cranking easier. The comfort grip reduces hand fatigue and the handle length makes cranking easier.
👤I bought this item to use with the NY harken hoist to lift my jeep top. I had to build a custom mount to mount to my wall, but once I got that together the lifting and lowering of my top seems much easier. I have to use the safety latch on the hoist to allow the hand winch to lower the load, but it has a reverse function. I don't need the safety on the hoist. I wish I could have moved the handle to the other side because it works perfectly. If you hold the handle while flipping the pawl to lower the load, it will freefall. If you need to walk a distance before hooking up on a stationary item, there is a free option.
👤The purchase and use of this product is the only way to accomplish any task without using a ladder, scaffold or any other help.
👤The female operator enjoys the control. The forward and backward motions are used.
👤I have a 30 gal. Chicken feeders hanging from a tree.
👤It is a machine. It's like a winch.
👤This works great for my zero turn lawnmower.
👤I used this as a tool for the grill. The grill can go up and down to keep the temperature steady.
👤I used this to hoist two kayaks from the rafters, and it worked great. It has a three-way switch that can be used for free-spooling or controlled unwinding. I can simply let the kayaks fall and the handle will spin away and let the kayaks set themselves down. This hand winch is amazing.
👤Apoyo para el trabajo. Al cargar cosas pesadas...
The risers are not suited for recliners and the furniture legs should not be thicker than 2.75" to ensure a stable base for the furniture. Keep hands free. The need for unconstrained arms was recognized by Shoulder Dolly. stabilization, opening doors, and overall balance are all achieved. It is designed to promote and facilitate proper lifting techniques. The ShoulderDolly can lift up to 800 lbs. Proper lifting techniques and use of the body's strongest muscles will help reduce back pain. Decreases strain on hands and arms. Users can move and lift heavy, bulky furniture with ease thanks to the seemingly unlimited adjustability of the strap through the buckle. The adjustability of the webbing through the buckle makes it possible for a single size to fit all. The ShoulderDolly doesn't make you stronger than you are without it. Back protection and steel toe shoes are always recommended. If you have physical limitations, do not use. The Shoulder Dolly Installation Guide can be found below. The ShoulderDolly doesn't make you stronger than you are without it. Back protection and steel toe shoes are always recommended. If you have physical limitations, do not use. The Shoulder Dolly Installation Guide can be found below.
👤We were excited to receive this strap in our warehouse because we occasionally need to move heavy items from 200 to 300 lbs with 2 men up a flight of stairs. Follow the instructions to the letter. Pick up the item. The locking mechanism for the person on top of the stairs slipped as we walked up the stairs. I had to take the harness off to save the guy at the bottom after most of the weight dropped to the person below. It was tried again with the same result. Returned because of safety concern. I am surprised the company has not been sued.
👤I don't know how to read it. They helped us in the moving process, but we almost died using them. The washer slid down the stairs towards my boyfriend, but my harness loosened as he tried to grab it. We were only 2 steps from the top when this happened. The washer would have taken him out if it had fallen. He would have fallen down the stairs, hit the concrete floor and had a washer hit him. It works better on lighter things, but be careful if you use it on things that could kill you. It rubbed out our knecks and left a deep red burn on them. We are bad. Middle aged people are happy to still be alive.
👤We couldn't use these to move anything. I thought the refrigerator was going to hit us as we tried to raise it. The directions are not very clear. The two of us were in a death trap and had to rise a small refrigerator up the front steps to escape. It would be a terrible way to die, strapped together with a 18 sq/ft fridge smashing us both. The neighbors found us dead the next day. The level of anxiety created over these traps was not worth it. Back away from this purchase. Hire a moving company.
👤This review is very difficult for me. The straps were used to move the piano. I think it weighed a good 600 lbs. I don't think we could have moved it without these straps, but they almost killed us. We are both capable of pressing a lot of weight. Walking across the room was very difficult. I don't know how we pulled that off. The strap held up well. The harness cut into our shoulders, but held up well. Even with 600 lbs on it, there was no slippage even when the strap was locked. My only complaint is that they claim to be able to easily lift and move heavy objects. If you're lifting a major, you need to be incredibly, strong, and if you have a bad back, don't dream of using these. That is what being said... There is a piano in our house.
👤We have 4 girls. My oldest daughter is in high school and we don't have help moving stuff. We are moving from New York to North Carolina this year and this product is going to make a big difference. I highly recommend this. I hope the review helps.
The 8 piece risers, ranging from 3 to 8 inches in height, add a new level of comfort to your life. The risers are wide and deep enough to hold furniture legs. When combined, the three height options of up to 3 Inches, 5 Inches and 8 Inches have the greatest bedpost distance, and the bed risers can be stacked together to conserve space. The bed leg fits securely into the recess cup and is convenient to use on any bed. They can support a total of up to 1,300 lbs. and are made of heavy-duty plastic, which can stand the weight of the heaviest furniture in your home or office. If a proper fit is being delivered, make sure to use bed risers together. The risers are not suited for recliners and the furniture legs should not be thicker than 2.75" to ensure a stable base for the furniture. The risers are not suited for recliners and the furniture legs should not be thicker than 2.75" to ensure a stable base for the furniture.
👤We moved from 2200 square feet house to 1200 square feet apartment. We ran out of space to put things in. They allow the bed to fit a lot of stuff under it. We purchased 3 sets. We were able to fit 2 huge totes and tons of boxes under our bed that wasn't able to fit anywhere else, and I was able to use these to lift our pack and play. I have no fear that these will not support. These are easy to use and have two height options. I have to do a run hop to get to my bed, but these are worth every penny. We have more space to fit all of our belongings, instead of having to get a storage container. This product is very good. Please let Amazon know if you found this helpful. Thanks!
👤Only used for a couple of weeks. I sat on the foot of the bed and boom broke through. Since I ordered the risers before the bed was delivered, I was out of the 30 day return window, which probably wouldn't make a difference as their return policy states it must be unused and undamaged. I bought two sets but am hesitant to use the rest. What a waste of money. You get what you pay for.
👤The smaller risers in this box are great for raising my desk up a few inches, but I thought the box had 8 risers, which is what the product name says. Instead, it comes with four risers of a small size and four of a larger size, which makes it four risers, not eight. I have a desk with eight legs and I cannot use just one box to elevate it. The product name should be changed to make it clear that what you are getting is only four legs of a furniture item. It isn't eight risers, no matter how you spin it. There are four risers and three different size options. I have an issue with these being oddly bulky. Unless your table or bed has large legs, you're going to be left with cube feet.
👤The legs are raised under the bed by using two of these. I had read that it would help with my problem. It definitely does!
👤My daughter's dorm room was given the extra storage by these risers. The bed is stable.
👤I usually read the negative reviews first. I decided to chance it. I ordered two sets of bed risers that were rated at 1300 lbs, so I had plenty of wiggle room on the weight capacity. I was glad I ordered two sets because I had two center feet to support. I tried the smaller ones. They were too high and the 4 inch adapters were a perfect fit. When I sit down next to the bed, it hits me above the knees because it is just 24 feet off the floor. I have used them since February and they are easy to use and slide on the floor when I need to make the bed. They have a good base that holds your bed at the right height for a comfortable night's sleep.
Platform bed lift mechanism 12v products from Prime Woodcraft. In this article about platform bed lift mechanism 12v you can see why people choose the product. Acdibca and Ezprotekt are also good brands to look for when you are finding platform bed lift mechanism 12v.
Prime Woodcraft, Acdibca and Ezprotekt are some of the best brands that chosen by people for platform bed lift mechanism 12v. Find the detail in this article. Iprimio, Eaz Lift and Arana are also brands that their products are worth to check.