Solid hardwood and hardwood composite are eco-friendly. It is designed for lasting Durability. The mattress sold separately is supported by a slat kit. On the side of the bed that has a trundle, it accepts up to an 8 inch mattress. The weight capacity is 800 lbs. The weight capacity is 800 lbs.
👤The plugs were supposed to be like that.
👤I needed a bed to accommodate myself and my two kids. Our bedroom is small and with a 6 drawer chest in the room it didn't leave much room. We all fit so well in our beds that we don't have to move around during the day when the bed is hidden. It took 30 minutes to put it together. The seller immediately shipped it out to me without charge after I contacted them, despite the description that it did not come with a charging accessory. It works great and I'm glad to be able to charge our devices close to my bed.
The queen bed frame supports a box spring and mattress set. 9 legs and a side-to-side center bar for optimal stability. The steel construction has a sleek black finish. Simple lock-together system for easy assembly. The queen size is 79.5 x 60 x 7 inches. The queen size is 79.5 x 60 x 7 inches.
👤I opened the instruction booklet and it said it supports up to 250 lbs. If you are going to sleep with someone else, you should watch your calories and take turns sleeping.
👤It would be great if it didn't have sharp corners at the end of the bed. It would be perfect if the company fixed this defect.
👤The frame was easy to put together, however, it was too short for the metal headboard that I purchased. My boyfriend was going to drill holes into a metal plate to get it to work, so I left it assembled in my guest bedroom. After assembling the bed frame, my sister asked me what the smell was in the house. We couldn't figure it out for a while and then realized it was from the bed frame. The smell was not noticeable until the frame was out of the box. Chemicals from the paint that was used to coat the bed frame began to release into the house after the frame was warm. I had clothes drying in my guest room and they had a toxic chemical smell in them. I had to wash the load, but it still smelled. The item was no longer in my house after I took the bed frame back up and put it outside. I tried to get the smell out by opening the windows, but it didn't work. I can't believe that Amazon would sell this product. The item is made in China and must be covered with TOXIC paint. This is the worst product I have ever purchased on Amazon. Rebecca is in Georgia.
👤I am very happy with this purchase. I hope it lasts and that we don't break it. Time will tell. There isn't a lot of space between the floor and the frame, but it's enough to tuck the front part of your shoes in. Hope this helps!
👤It was easy to put together. I was so worried that it wouldn't snap in place that I needed a screwdriver and tools. No, no. The steel is strong, the construction is well-made, and it fits my king size bed exactly. I told you that it wouldn't fit, and that it would be bad steel. This is very impressive to me. I think it's a great idea. The box springs off the floor. When our dog, a Jack Russell, got too old to jump up on the bed and everyone knew we all did anything we could to make him comfortable, we put it all off. Even to the point of putting a bed on the floor. He died last year and it was time to order a bed frame. I came up with this one after researching the Amazon offerings. I'm very happy. It came on time. It's a great product. If you fear buying a bed frame, know that it works. The bed has 2 box springs and one mattress.
👤I think I should have read it better. The frame is held together by gravity. The frame doesn't have wheels and the cross members are sitting in slots. If you shake the bed it will move. If I were you, I would spend more to get a better frame.
Fast and easy assembly is possible with the Quick Lock Construction. Increased mattress life is supported by strong steel. The need for a box is eliminated. It allows for under bed storage. There is a worry free 5 year warranty. There is a worry free 5 year warranty.
👤Someone used the phrase "snapped together", not so much. That's not a bad thing. It was a good kit with good hardware that went together with one person. There are a couple of words on materials. There could be sex on this thing. The close proximity of the slats is better than my old box spring, which makes my new latex mattress perform better. My highest rating is 4.
👤Sturdy frame. I have no concerns about stability because I'm a bigger guy. It wasn't hard to put together. The only complaint I have is that the metal surface doesn't have a lip to keep the mattress from sliding. The Tuft & Needle mattress is heavy, but it slides around the frame at the slightest nudging. I was able to fix this by attaching rubber cabinet liner around the outside of the frame and along some of the interior slats. The mattress doesn't slide around as much with a box spring. It would be nice if this was included.
👤It was very easy to put together. I like the Allen wrench because I'm not as strong as my husband. I was able to get a grip on it thanks to the Allen wrenches. It works perfectly in my platform bed. So far, so good!
👤The platform bed frame was the reason I got it. When I turned over mid-sleep, the sound woke me up. I needed something to get away without using the box spring, and this did the job. It was easy to put together and took about 20 minutes. I don't know if I'm crazy or not, but I've slept like a rock since I bought this, and I have no pains when I wake up. I'm not sure if the bed frame is making a difference or not, so I'm not going to question it. I was worried about the max weight, but I was not. I'm 350 lbs. It holds me in good stead. I believe that the max weight is 500, but I feel like it can hold a little more. I am very happy with this purchase.
👤This is a great bed frame. They thought through the assembly and it looks nice. About the assembly. The screwhole has a number next to it and you have to match the two that have the number 1 on them to get the screw. The screws are turned with the help of the allen wrenches, spare screws, and a few other things. You go to the ones that have 2 on them. You put the slats in after number 11. You can't see the numbers after you're done. It might be difficult to get some of them to go in if you tighten the screws before the slats. I did it by myself in 20 minutes, and I was moving a lot. I was impressed with the ease of the process. The frame is sturdy and good looking. It's a good height, I put a mattress directly on it, and it ended up at the height of my old setup. It's from the floor to the top of the mattress. It has a clearance from the floor to the bottom of the frame that is enough to fit a 70qt storage container underneath. I bought this frame with the intent of buying a 4-pack of those, and it worked out just as I had hoped. I'm really happy with this frame. You won't be disappointed if you give it a go.
You can maximize space in your bedroom with minimalist style. Steel slats can be used to support a mattress. The mattress has a unique design to keep it from slipping. There is more under bed storage and no box spring required. It is easy to set up with no tools required. The dimensions for the mattress/box spring are 79.5 x 59.5 inches. Under bed clearance is 16.25-inch slats.
👤I read through 17 pages of questions while investigating this on Amazon. I will try to answer the 10 questions that are on the 17 pages so that you don't have to read the answers. We bought the king bed version and are using it with a 13” memory foam mattress. This is the first review. I will update in a month. The shipping weight is 59 pounds. The box is 42” x 21” It was packed well for shipping. They were vague about when it would arrive. We ordered it on Thursday and it arrived on Wednesday, a day earlier than the shipping confirmation said. The assembly is happening The instructions are easy to understand because they are in pictograph form. You don't really need the words when they are written in English. There are six long metal pieces that make up the perimeter of the bed and an eighth one that goes down the middle. The legs open on the three long pieces. The four pieces that make up the top and bottom are bolted together. The instructions are easy to understand. Don't start attaching them until you lay all the pieces out. The instructions say "A1*1" and "A*1" but they don't say "B" and "B1" to indicate there is. If you look closely at the diagram, you will see that the A and B pieces have slots for a headboard, but the B does not. It took my wife and I less than 15 minutes to assemble it. The pieces are not heavy. Lifting the mattress up onto the frame was the hardest part. There are two long bolts and 12 short bolts. The Allen wrench and nut wrench are the only tools required. Everything was easy to attach. The metal slats are snapped into the holders. Four slats have red dots on them. The slots have small tongues on the end that open into small openings. There are 9 metal slats on each side of the bed. Each slat is 12 inch wide on top and 8 inches apart from each other. The top of the slats is below the frame. This provides a lip to hold your mattress in place and it fits our king memory foam mattress very snug so that it won't move. You don't need a box spring if you use a mattress. The frame is 18 inches high, so the mattress and box spring are very high. The top of the 13 inch memory foam mattress is almost 32 inches off the floor. If you have a traditional mattress, you can put it on the slats. If you have a memory foam mattress without a box spring, you should put something in between to keep the foam from squeezing through the slats. You can use a sheet of cardboard, butparticle board, peg board, thin plywood, and anything else will work. If you want to put in something like that, be aware that the inside dimensions of that lip are 75.5” x 79.5” so you need something slightly smaller than that. Cut it in half to fit in your truck or SUV. My wife and I decided not to put anything between the slats and the memory foam. We bought something to go in between when we read the question answers for 1/3 of the memory foam owners. The memory foam leaking between the slats was reported by 1/3 of the people, and so far on the first day we don't think it will be a problem. There are hardwood floors. There are nice hardwood floors in our house. My wife didn't trust the plastic caps on the frame that protect the floor, so she bought rubber squares to put under the feet. The king bed version has 9 feet so you need 9 square rubber pads. You can go without a dust ruffle if you don't put anything under the bed. The metal is artistic. It is black metal with square corners. You should hide the frame if you are going to store things under the bed. The frame is 18 inches high so a traditional dust ruffle is too short. A woman answering a question said she attached fabric panels to the frame with a stick on the Velcro. We plan to do that. It was very quiet once assembled. The bed did not move when I was laying on it and I was over the 300 pound mark. There was a small squeak if I shook back and forth and got on all fours. Most of the question answerers and reviewers said that there is no squeak with heavy people doing the horizontal mambo. The bed is shaking for certain activities and there is a quiet squeak. I don't think anyone would hear it if they were 40 feet away. It was a slight disappointment. It doesn't change my rating since almost any bed would have more of a squeak than this.
The metal queen bed frame has excellent support for the queen box spring and mattress. The center bar structure is stable and durable for long time use. Easy assembly. The design is easy to put up in 10 minutes. The queen mattress foundation frame has 6 inches of under bed storage. The small parcel is lightweight and convenient for doors and stairs. The small parcel is lightweight and convenient for doors and stairs.
👤There are a lot of options when looking for a bed frame. I would encourage you to follow through with the purchase if you are on the fence about it. The frame is easy to assemble. There are no tools needed for setup. These are steel beams that can handle a lot of weight. We decided to give this one a try because we had gone through two bed frames that we had bought from the original vendor and they had both broken on us, so we decided to give this one a try. We often have 2 or more people at a dinner party so we need sturdy furniture that can host our groups. We give this product two thumbs up.
👤I had a limited budget after we moved. I wanted the spare bed off the floor. I have a box spring and a mattress, so I couldn't get anything too far off the ground. The item was in a small box and had minimal pieces. I read reviews before buying so I know what to expect. I would echo those concerns. Parts A and B were not labeled, there were two sets of C and D parts, and only one of them was labeled. The feet/supports are easy to figure out. The instructions only say to pay attention to the direction. That's it. I didn't need to look at the instructions once I figured out what direction the parts should go. The feet/supports need to be screwed in place evenly throughout the middle of the frame as you can adjust them inward or outward. The box spring slides along the frame because I didn't make sure it was the right width. Since there are no additional supports that would prevent the mattress from sinking down in between the supports, you'll want to have a box spring for this frame. Overall, satisfied with the purchase. We will see how it holds up after some guests sleep on it.
👤What can I say about this frame? We spent the most money on a frame. We paid a lot for the other frames to break and bend when you make love. This one is really sturdy. I love that it has 9 legs. It is easy to move it around your room. I didn't read the instructions correctly and it took me 1 1/2 to put it together. Guys don't like reading instructions. A great buy. There is an update. 2/28/28. The first day we got it, we were still holding strong. The frame is keeping us from sleeping on the floor because of the broken box spring. If you want a good frame and want to stop spending money, you need to use this one. It holds my wife, her mom, her daughter and her daughter's little son, which is about 1,300 lbs.
👤The old frame had bent wheels, so we replaced it with this frame. It took 3 of us to put it together. The instructions were not easy to understand. We did it. We have a king mattress on top of our twin box springs. It works well. We were able to attach our bed to it. We have a heavy bed. The frame is strong. We are happy. We would recommend.
If you prefer a clean, simplistic look in the bedroom, it doesn't mean you have to sacrifice durability; the steel Trisha platform bed supports your mattress without stealing focus. 7-inch platform height is perfect for taller mattresses or for those who prefer their bed lower to the ground; twin size supports a maximum weight capacity of 350 lbs, while all other sizes can support up to 700 lbs. Reliable wood slats are designed to support and extend the life of your latex, memory foam or spring mattress without the need for a box spring. It is easy to assemble, all parts, tools, and instructions are shipped straight to your door in one efficiently packed box, and set-up takes less than an hour with a friend's help. The mattress is sold separately. The mattress is sold separately.
👤If you have a lot of tools, easy assembly takes about 30 min. The geometry was perfect, and it was surprisingly made. Instructions were easy to understand and the packaging was protected.
👤I have had it for almost 2 years and no problems. Frame has been able to store many boxes underneath with no problem. If you have a robotic vacuum and oversized top sheets, you'll need to pick the corners of the comforter/sheets from the floor so the Roomba doesn't get stuck. So far, so good! A great bed frame. It allows our little 10 lbs pomeranian to jump on and off the bed as she pleases throughout the night, and it eliminates our worry of her falling off the bed. Our bed frame is a low platform one and allows our Roomba under it. The assembly took less than an hour and included unpacking and cleaning up packaging. All parts have step numbers on them and are easy to assemble. If the bed frame doesn't hold up our weight, we may need to update the mattress with a new one.
👤The frame makes a squeaking sound when it's been a month. The bed will cause squeaks, non-stop squeaks, but so far there are no squeaks during sleep or moderate movements. I don't understand why the bed is squeaking since it has never been under more than 200 lbs. This is not half of the bed frame's maximum capacity. The bed has never been jumped on or abused and I assembled it correctly, it's simple as can be. I decided to keep the bed and try to repair it. I'll use Loctite Thread Locker to reset the bolts. I might use candle wax to coat the surface area in each of the corners where the frame bolts together and at the same time there is a 2 inch metal overlap of the interlocking frame pieces. The rubber washers could help prevent the bolt's head from squeaking. I'm prepared to replace the bolts with self-tapping screw-in bolts for a tighter fit. The last resort would be to have the frame welded into one piece and do away with the bolts. I believe I'll get a quiet bed, which is what my old wood-framed box spring bed provided when it was elevated by hidden concrete blocks instead of using a conventional bed frame, and I always attach my bed head board to the wall to prevent it from squeaking. I like a platform bed without a box spring, and I found out about it with this steel bed frame. It gives a lot of support. I'm going to try to make it work, but I can't recommend this frame because of its moderate squeaks.
👤The bed is good for the price. The frame is lightweight and has a clean look. I am really pleased. The wooden slats were held in place with the help of the Velcro tape. The wooden slats are lined with sticky tape to help keep your mattress in place. 30 minutes was the time it took to unpack and assemble. The instructions were easy to follow and the parts were clearly labeled. The fabrication was a bit off. The support posts under the center beam were removed 1/3” from the floor once the frame was assembled, causing the beam to bow slightly once weight was set onto the frame. The side beams and footer didn't align well on all four corners, which put additional tension on the bolts. I tried to get the bolt in with the allen wrench, but it was too weak. There are better beds out there. Not at this price.
The dimensions are 85 inches L x 63 inches W x 42.50 inches H. There is a practical bedding option with a storage compartment underneath. It's a perfect space-saving function. A stylish tuft design is featured in the modern design. Both Grey Linen and Black are available. The gas lift mechanism makes it easy to lift. Ships in several boxes.
👤I used to have a bed that went all the way to the floor, but I couldn't put anything under it. It's like I have an extra storage closet now that I've upgraded to this one. Love it. It helped to clear out my actual storage closet to make room for other things. It's a great place to keep my bedding. I was able to put this together in 1 hour and 3 minutes alone, but a second person would have made things easier. The instructions are included so you can see what to expect. It was difficult to add the main frame that holds the bed onto the lifting arms. I did it in a matter of minutes. It was pretty easy. It was easy to follow the instructions. A single person can put this together, but if you have another person there to help, things will be easier. The way they say to do it is to add the legs to the brackets first and then mount them, but I found it much easier to add the "N" brackets first. Doing it this way allowed me to do it myself, instead of having someone else do it for me. Don't lose any of the thunder! This kit only comes with the nuts and bolts you need, not a single extra nut or bolt is included, so be sure to keep your nuts and bolts. If you have a magnetic wrist band, I recommend it. You can keep the nuts and bolts in the case until you're ready to use them. If you wanted to, you could remove the large base boards to get more space. You might see things under the bed. If something is too tall to fit in there, it's an option. Double-sided tape on some of the wooden slats will prevent the mattress from sliding when you lift it. The metal brackets that are supposed to stop the bed from sliding were not working for my mattress. Wrap your mattress in a bed bug cover. This will prevent you from getting bed bugs. They work well. You don't need a box spring on this bed. It has slats that are supposed to replace the box spring so you just place your mattress on top. Before ordering, make sure you have a space for it. It has no problem lifting this mattress. It's more difficult to pull the bed down than it is to lift it. I can add all of my bedding and it still won't lift up. It locks into place when you put it down, so there's no chance of it lifting on its own. I paid $325 for a bed that I thought was an ok deal, but then the price went way up. If it was more than $325, I wouldn't have bought it. I thought it was a little high. Hope this helps someone else. It's a good thing.
👤This bed is great. There is a lot of bolts and nuts, but it is not hard to do. The bed took me about 3 hours to complete. Make sure the gas struts are on the right position as they go one way only in the assembly and make sure they don't screw the 'lock nuts' which are hard to remove once they are in. I am not saying it is a bad thing to have a hard time folding the bed once you open it, but the pressure on the gas struts makes it hard to do. It may be hard for some to apply extra strength when you push the bed back in place. You need two people to fit the mattress holder to the gas assembly. I try to keep it in place by myself but the weight broke the bolt and there is no spare parts. The price was right for this bed. Storage works as described. The bed was soft. It looks good and has some small details. The edges are soft after assembly. There is no counter hold for the gas strut bolt mount. There are no spare parts. The bolts' mounts turn at the same time you are fastening the nut into the bolt and the bolt mount doesn't have a counter hold to grip, making it hard to remove the nuts. I had to use pliers to hold the mount to counter my wrench to remove the nut since I first mounted the gas struts the wrong way.
The dimensions are 63" W x 85" D x 43.5" H. Linen fabric upholstery is soft beige. Wood legs with gold caps. Box Spring is not required. Purchase a complete set of Slats. Assembly hardware was included. The furniture finish is walnuts. The furniture finish is walnuts.
👤The bed is made of wood. The instructions are useless. We were able to assemble it after an hour of trial and error. It held my dad like a champ.
The consecration upholstered bed is a bed set that combines luxurious style with homey comfort for the best of both worlds. It is designed in a neutral color and has tufting. The bed frame is made of engineered wood and has plush upholstery on the rails and footboard. Soft neuralgia: The bed is dressed in a light shade of beige and has a light airy feel to it. It's easy to match with all kinds of decor with the neutral tone. The set includes a headboard, footboard and rails. The box spring and queen size mattress are not included. To locate the rails and footboard, please check the back of the headboard. It's necessary to assemble: Hardware and tools are included. The mattress and foundation are sold separately. Direct from the manufacturing process, the extra care is taken to package, protect and deliver your purchase in a timely manner. Buy with confidence was designed and manufactured by the company. The trusted source for stylish furniture. For every budget and taste. Also, note: The hardware pack is located inside the headboard.
👤It was beautiful when we got it together, but then the legs broke on the one side of the bed and the ones down the middle supporting the mattress. There is not enough support for a king size mattress. I have to get a new bed after only 2 months because of this. I will not recommend anyone or buy again.
👤I had been looking at this bed for a while. I was told it would be 8 weeks before it would ship, after I ordered it from a local furniture company. I found it on Amazon for $20 more and it would be delivered to my door in 2 days. The box was in good condition, but there were some issues with it. It was well packed and there was no damage. It took me about two hours to set it up. The instructions are not good, but with some common sense, you can do it. I've had it for a couple months now and it's great!
👤It was easy to setup. The support for the box spring and mattress is not good. The bed collapsed when the right rail broke as my boyfriend sat at the end. I had to buy a metal frame after removing the wood rails. The price is at a local furniture store. If you are wondering if a queen metal support frame will fit, it does!
👤Just bought it. It's a solid piece of furniture. It is easy to assemble. The fabric is of good quality. The side rail is held together with a metal plate rather than a long piece like in the picture. It works well with our bases. The bed is tall. When it's delivered, all the pieces are inside the headboard. The bad reviews claim that this isn't a platform bed. A platform bed means it is lower to the ground. You need a box spring or bunkie board to put your mattress on. You need a box spring before you buy it. They need platform beds. People's stupidity is to blame for a lot of unfair reviews.
👤There is a gap between the mattress and the bed. I bought a queen box spring and mattress, but it doesn't fit.
👤This was a much better deal than the one at the store. It came in a few days rather than months. Everything was inside the headboard. My 20 year old said it was easy for him to do. I don't like the fact that the vacuum can't go under the bed. It looks nice in his room. A tall headboard. He put it together and it smelled like the whole house for a week. Like so bad. I think it's the glue or something based on my research, because it was alarming when I first smelled it in our rebuilt home. Surely there is some other kind of glue that can be used to assemble furniture that doesn't smell like that, a cross between something is dead and something is on fire. I would have given it 1 star if I had known about it, so I was threatening to drag it to the burn pile for a few days. He loves the smell after 2 bottles of febreeze and a fan. The bed rails that the box spring sits on are very low so I would recommend a full size box spring rather than a low profile one like he bought. Check out the 12 inch version. A good purchase, aside from the smell.
The dimensions are: W x D x H. The frame is brushed bronze. Metal slats are durable. Does not need a box spring. The design is modern and classic. The design is modern and classic. The frame is brushed bronze.
👤I only gave it 4 stars because I had to call and get a new one. It was damaged in the box. The box was in poor condition. The bed is up. I put it together myself. I am 54 years old. The directions were easy to follow. The nuts and bolts were clearly marked. It is strong. You won't see much of the bed if you use a mattress and boxspring. I decided to use the mattress. There are a few pictures.
👤Flimsier than expected, but should be fine for sleepovers. The cats don't like it because it doesn't have a padded back or arm rests for them to sleep on, but we refuse to count their votes until they start chipping in.
👤The bed has been a nightmare. The assembly was ok, but the metal was soft as the screws were being inserted. The price was right and it looked great. It only got worse after a couple months. After a few weeks, with things to keep the bed from moving, one of the center legs started to bend, and the bed had to be moved. I think they are at a slightly different hight than the rest of the bed. This bed was used by one person only for sleeping. There were no bed moving actions happening. The end caps are seemingly secured by nothing as they are bending and falling off. I secured them and had no left over. They're secured with a weak screw and soft metal. I don't hang anything from them, so it's either me bumping it or it happening naturally. The 30 year old hotel brass bed on wheels I have at our cabin makes more noise than this bed. The things are so loud. I tried to tighten things. I tried to loosen things. I tried it. It was an absolutely miserable experience. Sometimes one of us will roll and wake the other up because of the creaking of the bed, because my partner is back. Man, its terrible.
👤I decided to order this bed after reading some reviews. I'm happy I did. The frame is very sturdy and easy to put together. The bed holds over 350 pounds with us. The bed does not need a box spring. I didn't want to get rid of mine just for that reason, so we have it on the bed as well. It's a nice height and exactly where I like my mattress, but it raises the height.
👤I was not sure if this bed was right for me. I was considering buying a bed at Walmart. I didn't. I'm happy. The Walmart bed was not as strong as this one. I was amazed at how easy it was to assemble. I shook it, bounced on it and did a few more stress tests and it was still strong as a rock. I'm a male who is over 200 lbs. The screws went in a little tight. I can't complain because they went in. My only advice is to buy this bed. The side rails should be tightened before you install the cross bars. Place the cross bars in one at a time if you screw them in. I learned the hard way and they were fine with it. I tightened the screws with the plastic lock tabs and called it a day. I like the bed and I think it will last a long time.
The fabric upholstery has a steel framework. Good looks and conflagration style. The Shalini makes a stunningly chic addition to your bedroom and is made of sturdy construction and diamond pattern stitching. The Twin size supports a maximum weight capacity of 350 pounds, while all other sizes can support up to 700 pounds. slats are not required for a box spring, and they can be used for both twin and full sizes. Everything you need is packed into a single box and shipped straight to your door, and all the parts, tools and instructions are located in the compartment of the headboard for easy assembly in under an hour. The mattress is sold separately. The furniture finish is wooden slats. There is a bed frame inside.
👤This is the second bed frame I have purchased. I bought this bed after reading all of the positive reviews. The website said it could take five days to receive it. I got it in two. I had a hard time getting this huge box up the stairs in my apartment building, but I did manage to get it up 5 flights of stairs. The bed is sturdy and the wooden plank are held in place by the straps. The bed can hold some weight. My partner is 6'7 I'm 5'6 159. It holds up. Assembly was easy because of the instructions. My bed is not big enough for a lot of under bed space. I was pleased with the look, feel and quality. I moved my bed so that you could see the size. I have a full size mattress set that does not require a box spring. You took the time to read my review. I hope you found it useful.
👤The bed frame was easy to set up, but I found out the headboard was not bug free. This has been a problem for other customers and I wish I'd read more of the reviews. I'm currently sleeping on my couch as I wait for the treatments to come so I can get back to sleep. I think it is a nice bed frame and headboard, but not worth the risk of getting bed bugs or paying for an exterminator.
👤Don't do it! There is more to the frame than you can see. The last reviews I saw about the bedbug were a year ago. I assumed the seller fixed it. I ordered the bed frame and loved it for a while, but then I started getting itchy bumps and my hands were on fire from all the bites. Don't do it because it hurts so bad. I used bedbug killers and spray but didn't work. I've spent 40 on drugs, vitamins, and creams trying to heal the itching and it's only a short-term fix. I thought I could roast them off the bed by using a UV light. That hasn't worked. The issue of the bed is still there because of all the reviews a year ago. They are telling you not to do it. Its not worth it!
👤The bed is a good value. It was easy to put together. The time was 45 minutes. All pieces fit together. The Allen wrench was included. There were no other tools needed. The instructions were sufficient. Not great but good. The bed is strong. The mattress is perfect. It is not a fancy bed. The pictures depict the product. You should adjust your expectations. It has been almost a year since there have been any issues. I'm 6' 3 and it supports me very well. There was no creaking or noise. It is also very stable. It stays put on the floor. I didn't use the strips on the slats. The mattress stays in place. I would do it again. A friend of mine bought the queen size version a couple of months ago and is happy with it. I have the same experience so far. The parts are kept inside the headboard during shipping. To see it, be sure to open it. This feature is great for moving. The king size mattresses are 76 x 80. If you are short on one side, you should rotation your mattress 90 degrees. It is very quiet during those private moments. At 33 months, there is an update. I was starting to hear some creaking. All Allen bolts were tightened back up. The fabric on the bed is holding up.
Platform bed frame queen size with storage beige products from Atlantic Furniture. In this article about platform bed frame queen size with storage beige you can see why people choose the product. Amazon Basics and Zinus are also good brands to look for when you are finding platform bed frame queen size with storage beige.
Atlantic Furniture, Amazon Basics and Zinus are some of the best brands that chosen by people for platform bed frame queen size with storage beige. Find the detail in this article. Olee Sleep, Zizin and Dhp are also brands that their products are worth to check.