Best Platform Bed Center Slat Support Leg

Support 6 Jul 2022 10+ Comments Open

1. Zinus Compack Spring Mattress Risers

Zinus Compack Spring Mattress Risers

Support and stability with 9 legs. There is plenty of under bed storage space. Easy assembly. It was a hassle free. The construction has an easy locking system. It is easy to adjust for Twin, Full, and. The queen size is large. It is easy to adjust for Twin, Full, and. The queen size is large.

Brand: Zinus

👤It was assembled yesterday. You can layout the pieces before you see the assembly order. I knew the bolts needed to be tight from the start because of the noise in other reviews. For queen, loosen the bolt and extend it all the way. When installing wing nuts and bolts, use the Allen wrench and hold the wing nut with pliers. I had to give box spring a small push to get it in on one side. It fit perfectly. The cats think the extra head space is great. Will update if there is a negative outcome.

👤It was super impressed. I was confused when I saw the box outside. There was no way a queen sized bed frame could fit in a small box. It was. The way the pieces unfold and lock together to form the frame is very clever. The components are very sturdy and the legs are bolted into place to ensure stability. The frame was very rigid and took only minutes to assemble. The box spring is above the level of the bolts if the "anti-slip" pieces are used. I was a little concerned about whether or not the box spring would fit between the rails, based on the reviews I'd read. It was perfect. The C2 is a bit on the short side, but the 12" legs worked out perfectly for me. I can confirm that a 45# dog can easily get under the storage and I would recommend it to a friend.

👤The side rails to the daughter's bed broke when we PCS'd from Texas to Georgia. Last week, I realized we could just attach the head board to the metal frame and fix it, instead of getting a new bed. I wanted a 12in frame that would allow for under storage.

👤It is easy to assemble, but not sturdy and doesn't stay in place very well. The boxspring shifts off the bed frame when I try to get on it. I'm not sure why there are pieces included to prevent that from happening. I would recommend paying more for a better product. The frame is barely in place during adult activities. Is supposed to hold over 2,000 lbs, but can barely hold two adults having fun. I tried reaching out to this company but have been given the run around for the last week and no one is responding to me. I wish I never bought from this company. If I could, it would be 0 stars. The customer service was not satisfactory.

👤It is lightweight, but does its job. I don't hear any squeaking when I move around on the bed. I am a queen size. Some reviewers said this wouldn't be wide enough for a queen. I had a problem with the screws already positioned at the "queen" marked holes. Even if the product comes with the screws in the right place, you still have to remove the wing nut from the bottom and re-tighten the wingnuts to fully extend the metal bars. Hopefully it helps some people. The instructions didn't explain this part at all, and I can definitely understand the confusion.

2. Lusata Hardware Attachment Double Bracket

Lusata Hardware Attachment Double Bracket

PostBed brackets are intended to be a replacement for damaged post brackets and are suitable for new bed construction. The package has 2 pieces Double Hook Slot Brackets with lengths of 3.88" (98.6mm) and 1.07" (29.8mm) The brackets are made of 13 gauge iron and have stoving varnish for rust resistance. Measure the working data of the parts you need to replace and read the detailed data of the second diagram. 2 pieces Bed Post Double Hook Slot. 2 pieces Bed Post Double Hook Slot.

Brand: Lusata

👤The support brackets are made of steel. It was a great value for the price paid. Pre drilled holes for use.

👤I was worried because they were so small, but they work well.

👤We had to figure out what size to buy because there were no bolts. We had to drill the bed and brackets.

👤Does what it needs to do.

👤They fit in my bed posts.

👤It is easy to install and it has great quality and customer service.

3. Olee Sleep Non Slip Support OLR18BF04F

Olee Sleep Non Slip Support OLR18BF04F

The slats are heavy duty. Does not require a box spring. The product dimensions are 76.1” L x 55.1” W x 18” H. The weight was 46.4 lbs. The frame is put over the mattress to prevent it from slipping. It's necessary for assembly to be required. The required hardware and tools are included. Fast furniture delivery and a limited manufacturer warranty. The dimensions for the mattress/box spring are 74.5 x 53.5 inches. The slats are 16.25 inches under the bed clearance. 5-year manufacturer warranty. 5-year manufacturer warranty.

Brand: Olee Sleep

👤I read through 17 pages of questions while investigating this on Amazon. I will try to answer the 10 questions that are on the 17 pages so that you don't have to read the answers. We bought the king bed version and are using it with a 13” memory foam mattress. This is the first review. I will update in a month. The shipping weight is 59 pounds. The box is 42” x 21” It was packed well for shipping. They were vague about when it would arrive. We ordered it on Thursday and it arrived on Wednesday, a day earlier than the shipping confirmation said. The assembly is happening The instructions are easy to understand because they are in pictograph form. You don't really need the words when they are written in English. There are six long metal pieces that make up the perimeter of the bed and an eighth one that goes down the middle. The legs open on the three long pieces. The four pieces that make up the top and bottom are bolted together. The instructions are easy to understand. Don't start attaching them until you lay all the pieces out. The instructions say "A1*1" and "A*1" but they don't say "B" and "B1" to indicate there is. If you look closely at the diagram, you will see that the A and B pieces have slots for a headboard, but the B does not. It took my wife and I less than 15 minutes to assemble it. The pieces are not heavy. Lifting the mattress up onto the frame was the hardest part. There are two long bolts and 12 short bolts. The Allen wrench and nut wrench are the only tools required. Everything was easy to attach. The metal slats are snapped into the holders. Four slats have red dots on them. The slots have small tongues on the end that open into small openings. There are 9 metal slats on each side of the bed. Each slat is 12 inch wide on top and 8 inches apart from each other. The top of the slats is below the frame. This provides a lip to hold your mattress in place and it fits our king memory foam mattress very snug so that it won't move. You don't need a box spring if you use a mattress. The frame is 18 inches high, so the mattress and box spring are very high. The top of the 13 inch memory foam mattress is almost 32 inches off the floor. If you have a traditional mattress, you can put it on the slats. If you have a memory foam mattress without a box spring, you should put something in between to keep the foam from squeezing through the slats. You can use a sheet of cardboard, butparticle board, peg board, thin plywood, and anything else will work. If you want to put in something like that, be aware that the inside dimensions of that lip are 75.5” x 79.5” so you need something slightly smaller than that. Cut it in half to fit in your truck or SUV. My wife and I decided not to put anything between the slats and the memory foam. We bought something to go in between when we read the question answers for 1/3 of the memory foam owners. The memory foam leaking between the slats was reported by 1/3 of the people, and so far on the first day we don't think it will be a problem. There are hardwood floors. There are nice hardwood floors in our house. My wife didn't trust the plastic caps on the frame that protect the floor, so she bought rubber squares to put under the feet. The king bed version has 9 feet so you need 9 square rubber pads. You can go without a dust ruffle if you don't put anything under the bed. The metal is artistic. It is black metal with square corners. You should hide the frame if you are going to store things under the bed. The frame is 18 inches high so a traditional dust ruffle is too short. A woman answering a question said she attached fabric panels to the frame with a stick on the Velcro. We plan to do that. It was very quiet once assembled. The bed did not move when I was laying on it and I was over the 300 pound mark. There was a small squeak if I shook back and forth and got on all fours. Most of the question answerers and reviewers said that there is no squeak with heavy people doing the horizontal mambo. The bed is shaking for certain activities and there is a quiet squeak. I don't think anyone would hear it if they were 40 feet away. It was a slight disappointment. It doesn't change my rating since almost any bed would have more of a squeak than this.

4. Mombinus Assembly Mattress Foundation Reinforced

Mombinus Assembly Mattress Foundation Reinforced

It's easy asSEMBLE. 5 year warranty on clear marks on parts. The queen bed frame provides excellent support for your box springs and foam mattresses, but you need to buy them separately. The bed platform queen supports up to 3500 lbs, and is made of 9 metal support legs. Extra tools are not needed. The frame queen can be assembled in 10 minutes. You can change the style of the queen bed as you please. A small parcel is convenient for doors and stairs. It is easy and portable. The classic black paint bed frame queen size is minimalist and perfect for other furniture.

Brand: Mombinus

👤The legs went under and bent when I leaned on the side of my bed.

5. Furniture Support Adjustable Platform Replacement

Furniture Support Adjustable Platform Replacement

The 14 inch tall mattress foundation has plenty of underneath storage space. There is a 12 inch height clearance. There is a worry free 5 year warranty. This product can be used for most of the bed frames. The adjusted size is 7.8in. Simple assembly. The package has 2 furniture legs and 2 screws. The furniture legs need to be raised. It is easy for beginners to put it into service. There are two furniture legs with a load capacity of about 300 kilogrammes. The furniture legs are made of iron, which has a high load-bearing capacity, even after many years of use. There is a glue pad at the bottom of the leg. Saving money on bed repairs and mattress replacements can be accomplished by using the bed frame support legs. The design is a cost effective way to maintain your expensive bed base. There is a satisfactory warranty and service. If you find the product damaged or missing, please contact their customer service center. They will give you the best solution.

Brand: Kusrup

👤I'm 175 lbs and my husband is 250 lbs. The wood support legs that broke due to the slipping on my laminate flooring were replaced with these. I bought a rug and coasters for the feet of my bed to help keep it in place. When my husband and I had sex once, the damage was really noticeable. We checked the legs and they were so crooked that the screws for the feet were warped and one foot was missing. Since our wood ones broke and scared us at 6 o'clock in the morning, we checked on them about once a week to see how they were holding up. We had to adjust them twice before to tighten them, as they would become loose and I had to drill new holes in the slats to fit the original ones. I'm pretty sure that the reason they would get loose was because of that, but I still think it would be more full-proof with the additional hardware. I think I could give this 4 or 5 stars if I had carpet flooring, but since these didn't hold out on a laminate floor, I can only give it 3. I have had them for less than a month.

👤I used these to replace the wooden legs on my bed frame. They are strong and solid. These would hold up to Hedonism Rick's rippin and a tearin, rippin and a tearin.

👤The wood splitting in the wooden support beams was one of the issues I had with the bed set. I replaced one of the broken wooden beams with this and it worked perfectly. Measure the hole that the screw needs to go into. The legs won't attach if the hole isn't the right size.

👤The bed was left in the middle. The main outer legs were shorter than the 8 legs on the inside. I added an inch to the middle frame after ordering 8 of these legs. The problem was fixed and the bed feels stronger. I had to drill some legs bolts because they were a bigger diameter than my other legs. I think it is well spent to buy 8 of these. Very happy with them.

👤I bought a king size bed several years ago and finally got it set up for the first time. The frame supports were missing. This was the closest I could find. The height can be adjusted to match the ones that came with the bed. It works perfectly.

👤All my bed support legs rest on cheap silicone sponges. The drill had to be used to widen the holes on the bunkie board, but it was easy.

👤Was a great buy. Measure your legs to make sure you get the right height for your bed. This is a good value at a fair price, and it does the job.

👤I needed the legs to support my bed frame. It was easy to install. Provide the best support.

6. Amazon Basics 9 Leg Support Frame

Amazon Basics 9 Leg Support Frame

The queen bed frame supports a box spring and mattress set. 9 legs and a side-to-side center bar for optimal stability. The steel construction has a sleek black finish. Simple lock-together system for easy assembly. The queen size is 79.5 x 60 x 7 inches. The queen size is 79.5 x 60 x 7 inches.

Brand: Amazon Basics

👤I opened the instruction booklet and it said it supports up to 250 lbs. If you are going to sleep with someone else, you should watch your calories and take turns sleeping.

👤It would be great if it didn't have sharp corners at the end of the bed. It would be perfect if the company fixed this defect.

👤The frame was easy to put together, however, it was too short for the metal headboard that I purchased. My boyfriend was going to drill holes into a metal plate to get it to work, so I left it assembled in my guest bedroom. After assembling the bed frame, my sister asked me what the smell was in the house. We couldn't figure it out for a while and then realized it was from the bed frame. The smell was not noticeable until the frame was out of the box. Chemicals from the paint that was used to coat the bed frame began to release into the house after the frame was warm. I had clothes drying in my guest room and they had a toxic chemical smell in them. I had to wash the load, but it still smelled. The item was no longer in my house after I took the bed frame back up and put it outside. I tried to get the smell out by opening the windows, but it didn't work. I can't believe that Amazon would sell this product. The item is made in China and must be covered with TOXIC paint. This is the worst product I have ever purchased on Amazon. Rebecca is in Georgia.

👤I am very happy with this purchase. I hope it lasts and that we don't break it. Time will tell. There isn't a lot of space between the floor and the frame, but it's enough to tuck the front part of your shoes in. Hope this helps!

👤It was easy to put together. I was so worried that it wouldn't snap in place that I needed a screwdriver and tools. No, no. The steel is strong, the construction is well-made, and it fits my king size bed exactly. I told you that it wouldn't fit, and that it would be bad steel. This is very impressive to me. I think it's a great idea. The box springs off the floor. When our dog, a Jack Russell, got too old to jump up on the bed and everyone knew we all did anything we could to make him comfortable, we put it all off. Even to the point of putting a bed on the floor. He died last year and it was time to order a bed frame. I came up with this one after researching the Amazon offerings. I'm very happy. It came on time. It's a great product. If you fear buying a bed frame, know that it works. The bed has 2 box springs and one mattress.

👤I think I should have read it better. The frame is held together by gravity. The frame doesn't have wheels and the cross members are sitting in slots. If you shake the bed it will move. If I were you, I would spend more to get a better frame.

7. Adjustable Support Furniture Cabinet Mounting

Adjustable Support Furniture Cabinet Mounting

The wooden slats will bend or break if the weight of the mattress is not supported. The wooden slats on your bed and mattress need to be supported to prevent sagging and damage. You don't need to give up your bed frame or upgrade your mattress to get the central slat support legs. It's suitable for most bed frames. The table legs are adjusted. The original height of the bed legs is 7.08" and the height can be adjusted. Just turn to the right to adjust the height. The bed frame legs should not be adjusted to the maximum size. Furniture legs are easy to install. If the bed frame has holes, you can use a brackets to align the double holes and tighten them. When the bed frame has no holes, use the feet and the bed frame to place the counter-piece in a criss-cross pattern, place the bed frame on top of the counter-piece and tighten it. Bed support legs are made of steel with thick tube walls and are not easy to rust. The furniture legs are made of a non-slip and wear-resistant base, which will not damage or scratch your beautiful floor or carpet, and at the same time can reduce noise. Bed frame legs include 2 furniture legs, 4 screws, 4 nuts and 2 mounting plates. If you discover that the product is damaged or missing parts, please contact them in time and they will provide you with a replacement service. Bed frame legs include 2 furniture legs, 4 screws, 4 nuts and 2 mounting plates. If you discover that the product is damaged or missing parts, please contact them in time and they will provide you with a replacement service.

Brand: Telanks

👤The bolts wouldn't tighten in place without moving so they don't hold securely and they buckled within one night, making it a waste of money.

👤We had to replace our stands. These work well. I haven't had any issues. It's easy to install.

8. Furniture Adjustable Support Platform Replacement

Furniture Adjustable Support Platform Replacement

You should protect your floor. Are you worried about scratches and damages to your hardwood floors? Don't be! The modern bed frame center slat support leg has a smooth plastic glide that ensures proper weight distribution and is perfect for both carpet and hard floors. What are you waiting for? Place your order now and keep your bed slats and mattress like new. If you have a bedstead steel tube that is more than 1.18 inches, this product won't work. If the steel tube is less than 1.18 inches, you must fill it with material. Before buying, please check and measure the legs. The size is 5.8in, 7.8in, and9.8in. Saving money on bed repairs and mattress replacements can be accomplished by using the bed frame support legs. The design is a cost effective way to maintain your expensive bed base. The material is plastic and metal.

Brand: Kusrup

👤Ignore the 1 star review first. I don't know what they mean by lighting. The center support legs on a bed frame can be replaced with a set of two legs. The replacement center support legs for our queen bed frame are very sturdy. They were easy to install. I just needed a wrench and a screwdriver to replace the ones I took off. It's easy! Each leg has a broad base and is a sturdy square leg. The video shows the difference between the junk support legs that came with the bed and the sturdy new ones listed here. Measure your old support legs to make sure they fit your bed frame. Measure the height of the leg. There are different sizes in this listing. It's important to order the right size for the replacement. Instructions to be included in packaging is the only thing that could improve. I looked at the pictures on Amazon. It might be so simple that none are needed.

👤I had to lower the bed. I bought a set to check them out. They were perfect. I ordered a 2nd set because I needed 4 support legs. There was a bolt missing in the 2nd set. I gave it a 4 rating because of that.

👤It is not the right part.

👤The legs tilt when you move the frame left to right.

9. Adjustable Furniture Platform Mattresses Replacements

Adjustable Furniture Platform Mattresses Replacements

The bed furniture legs can be adjusted to 13 inches. The large size helps prevent damage to the floor. Don't worry about the damage to your floors. You can save money on bed repairs. The construction of the Support Leg for Bed Frame allows you to add essential support to wooden slats or bed frame, protecting your bed and mattress from sagging and damage. You don't need to give up the bed frame or down grade your mattress. Also, note: The product only has support legs and is only shown where to attach. The material is made from aluminum alloy and will not rust, and Leg bottom PVC pads are non-slip and wear resistant, so they will last a long time. The Steel Furniture Foot is meant to be attached to the slats of your bed frame in order to prevent sagging, bow, or cracking. Without proper center support, the weight of the mattress will bow or crack the wooden slats, causing them to slide,squeak while you try to sleep. The feel of the mattress can affect your spine in many ways. 2pcs supplementary plate and 2pcs Height Center Support Leg are included. There were no extra trips to the Hardware Store. 2pcs supplementary plate and 2pcs Height Center Support Leg are included. There were no extra trips to the Hardware Store.

Brand: Brookeville

👤Needed to drill and bolt on the frame. Didn't work on the edge of the angle. The bed frame is very hard and will work hard when drilled. Sharpen bits with a steep angle on the backside. The hole is a pilot hole.

👤100% satisfecha, gracias!

10. Adjustable Height Support Cabinet Replacement

Adjustable Height Support Cabinet Replacement

It is suitable for most of your bed frames. The bed frame support legs construction allows you to add essential support to bed slats or bed frame, protecting your bed and mattress from sagging and damage. The bed frame has holes, so it's easy to install. If the bed frame has no holes, tighten the screws on the bed frame with bed frame legs and auxiliary plate. The bed rail support for wooden bed are made with high-quality steel to prevent rust and corrosion, Leg bottom PVC pad are non-slip and wear resistant, and it has better grip. The bed frame has 2 legs that can be adjusted from 5.1 to 9.6 inches. The design is a cost effective way to maintain your expensive bed base. Saving money on bed repairs and mattress replacements can be accomplished by using the bed frame support legs. The design is a cost effective way to maintain your expensive bed base. Saving money on bed repairs and mattress replacements can be accomplished by using the bed frame support legs.

Brand: Ruiru Bro

👤It's easy to install. It's easy to understand directions. It's easy to place hight along rails. I use them as extrahead center and foot support for my mattress frame slates. The two slate frames are held together in the middle by an attached piece of furniture.

👤If it is attached to a flat surface, it will work, but if it is attached to a frame that is round, it won't work. One of the legs was broken, but they sent me a pair of legs right away. I was able to send them back.

👤El colchn est firme y se siente. Muy tiles, con nuevas patas puedo mover la cama.

👤Simple, does what is advertised.

11. Zinus Platforma Mattress Foundation Optional

Zinus Platforma Mattress Foundation Optional

If you prefer a clean, simplistic look in the bedroom, it doesn't mean you have to sacrifice durability; the steel Trisha platform bed supports your mattress without stealing focus. 7-inch platform height is perfect for taller mattresses or for those who prefer their bed lower to the ground; twin size supports a maximum weight capacity of 350 lbs, while all other sizes can support up to 700 lbs. Reliable wood slats are designed to support and extend the life of your latex, memory foam or spring mattress without the need for a box spring. It is easy to assemble, all parts, tools, and instructions are shipped straight to your door in one efficiently packed box, and set-up takes less than an hour with a friend's help. The mattress is sold separately. The mattress is sold separately.

Brand: Zinus

👤If you have a lot of tools, easy assembly takes about 30 min. The geometry was perfect, and it was surprisingly made. Instructions were easy to understand and the packaging was protected.

👤I have had it for almost 2 years and no problems. Frame has been able to store many boxes underneath with no problem. If you have a robotic vacuum and oversized top sheets, you'll need to pick the corners of the comforter/sheets from the floor so the Roomba doesn't get stuck. So far, so good! A great bed frame. It allows our little 10 lbs pomeranian to jump on and off the bed as she pleases throughout the night, and it eliminates our worry of her falling off the bed. Our bed frame is a low platform one and allows our Roomba under it. The assembly took less than an hour and included unpacking and cleaning up packaging. All parts have step numbers on them and are easy to assemble. If the bed frame doesn't hold up our weight, we may need to update the mattress with a new one.

👤The frame makes a squeaking sound when it's been a month. The bed will cause squeaks, non-stop squeaks, but so far there are no squeaks during sleep or moderate movements. I don't understand why the bed is squeaking since it has never been under more than 200 lbs. This is not half of the bed frame's maximum capacity. The bed has never been jumped on or abused and I assembled it correctly, it's simple as can be. I decided to keep the bed and try to repair it. I'll use Loctite Thread Locker to reset the bolts. I might use candle wax to coat the surface area in each of the corners where the frame bolts together and at the same time there is a 2 inch metal overlap of the interlocking frame pieces. The rubber washers could help prevent the bolt's head from squeaking. I'm prepared to replace the bolts with self-tapping screw-in bolts for a tighter fit. The last resort would be to have the frame welded into one piece and do away with the bolts. I believe I'll get a quiet bed, which is what my old wood-framed box spring bed provided when it was elevated by hidden concrete blocks instead of using a conventional bed frame, and I always attach my bed head board to the wall to prevent it from squeaking. I like a platform bed without a box spring, and I found out about it with this steel bed frame. It gives a lot of support. I'm going to try to make it work, but I can't recommend this frame because of its moderate squeaks.

👤The bed is good for the price. The frame is lightweight and has a clean look. I am really pleased. The wooden slats were held in place with the help of the Velcro tape. The wooden slats are lined with sticky tape to help keep your mattress in place. 30 minutes was the time it took to unpack and assemble. The instructions were easy to follow and the parts were clearly labeled. The fabrication was a bit off. The support posts under the center beam were removed 1/3” from the floor once the frame was assembled, causing the beam to bow slightly once weight was set onto the frame. The side beams and footer didn't align well on all four corners, which put additional tension on the bolts. I tried to get the bolt in with the allen wrench, but it was too weak. There are better beds out there. Not at this price.

Summary

What is the best product for platform bed center slat support leg?

Platform bed center slat support leg products from Zinus. In this article about platform bed center slat support leg you can see why people choose the product. Lusata and Olee Sleep are also good brands to look for when you are finding platform bed center slat support leg.

What are the best brands for platform bed center slat support leg?

Zinus, Lusata and Olee Sleep are some of the best brands that chosen by people for platform bed center slat support leg. Find the detail in this article. Mombinus, Kusrup and Amazon Basics are also brands that their products are worth to check.

You May Like

Share Your Story

Your name:
Choose product to comment:
Write your review:
By submitting this review, you are agree that:
  • Your review is based on fact, honest, polite and not harmful to anyone or any brands.
  • We have full right to show or not-to-show your review after moderation.
  • No spamm please :)
Disclaimer
We might earn comission for your shopping via our links, it doesn't cost you extra. This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com