The frame can be Withstand heavy weight and pressure. 13 inches off the floor maximizes your bedroom space. Stubbing your toes on the bed can be dangerous. Dura metal provides solid support for you and mattress. Easy to install, fold and unfold the frame in minutes. There was no need for a box spring.
👤The first bed frame I received was useless because the legs couldn't lock into place on one end. I was sent a replacement by customer support after I reached out. The legs of the second one were not strong enough to lock into place, which made it impossible to use. I received this message after reaching out to support again, and we apologize for the hassle. If you want to return the item, please contact Amazon.com. Amazon.com has a 30-day return policy. It is not a matter of whether the product is the right fit for me or not, it is a matter of your product quality being poor and not being able to guarantee that the product that arrives is not faulty. Don't blame your customers. This goes against the core values of the company. Get the problem fixed. I don't recommend this product for anyone because you will get a bad product and the replacement will be bad, and support will tell you that it's not the right product for you.
👤I bought this frame for my guest room and I was amazed by the quality. If you need more space, you can fold it and put it away. I was skeptical because there was no review and the price was so cheap, but after looking up their other items, it seemed reliable to give this a try! It is worth the investment and worth the value. I'm looking forward to trying their other products as well. Also the fast shipping. The price is amazing for the quality and it is easy to assemble and put away. Highly recommend this!
👤I was very excited to start sleeping on my new package. I notice that one of the legs is not even with the others. Update on my previous review. The thin rods on the frame are not perfect. Some of them are bent over. My mattress bottom is wrinkled. I don't know if it is damaged. I would suggest the distributor and creator of this bed frame to include a sturdy bottom support or plywood like material to "sandwich" between the frame and mattress to avoid other harm to the consumer's matress.
👤The queen was bought to be used as a guest bed with a blow up mattress. The replacement was sent out immediately after it did not arrive. It's just like a fold-out table and it could not have been simpler to assemble. The package is about 40 lbs but the 2 pieces feel lighter at 20 lbs each. They are the perfect size to fit under the clothes rod in my closet. I bought a queen mattress a year later. I put a barrier between the mattress and the frame with some corrugated boxes. So far, so good. A little over a year after I purchased. I put the frame away for a party and assembled it again, but one of the spring loaded buttons in one leg wouldn't open. I received a reply from customer service that the leg is covered under the limited warranty and they will send me a replacement leg. Great customer service.
Good sleep and a strong frame with steel slat structure. Match standard size twin full queen king size mattress with no box spring needed. 14 inch high platform bed frames with 12 inch of ample under bed storage. Non-SLIP: Plugs to avoid noice protect the floor. It's easy asSEMBLE. 5 year warranty guarantee, no tools required, easy to assemble. It's easy asSEMBLE. 5 year warranty guarantee, no tools required, easy to assemble.
👤My disabled daughter is prone to flop down on her bed several times a day. The frame seems to be holding up well. It works for us because the mattress doesn't slide around. It arrived earlier than expected. It's all good.
👤It took a while, but it's sturdy. Husband weights 320 and no issues.
👤My daughter has had this bed for a month and it is all good. It is easy to assemble. She wouldn't hurt her toes if I added black noodles to the bed. I got them at the plumbing section of the home depot and fastened them with black zip ties so they blend in with the bed color. If you don't like the look of the bed skirt, it will cover up the noodles.
👤I don't understand why people think this is hard to put together. I didn't have any trouble at all. The legs will rip off your toes. I wrapped pool noodles around the legs. Very happy with it.
👤The frame was easy to assemble but not all of the slats were on it. I had to space out the missing parts because I didn't realize they were there.
👤We replaced a wooden bed with a steel one. Our previous bed had drawers but we decided we wanted traditional underbed storage so this bed is a win/win.
👤I put it together myself. I love it!
👤Despite the complaints of the bed being "squeaky", they recommend power tools to get the bolts on really tight. To prevent squeaking, tighten only enough to put it together and realign as needed. I did mine by hand, and I don't have any issues with squeaking. The frame is larger than the queen mattress. I bought a grip pad to make sure I didn't slide while I bought the mattress. The instructions were torn because they were shoved to one end of the box and had a couple of holes. Assembly instructions were not bad. I put it together myself. The package of screws should have the letters on it as well. You have to look at which one is which and refer to the area of the box on the instruction sheet. It is recommended that you have someone assemble it with you. My big and only complaint. If you don't buy anything for the corners, you will be scrapping your leg and it will break. It's a good thing.
Product dimensions are 75" L x 54" W x 14" H. It is designed for people who weigh up to 250 pounds. The platform bed frame has a supportive foundation for a mattress. There was no box spring needed. The frame is easy to store and move in tight spaces with the folding mechanism. Extra under-the-bed storage space with a vertical clearance of 13 inches is provided. Extra under-the-bed storage space with a vertical clearance of 13 inches is provided.
👤The basics platform of Amazon is doing it's job but has a design flaw. The edges of the rods should be covered with a smooth surface. I put my new mattress on this platform. It ripped off my new mattress at all the sharp edges, voiding my warranty. If you place smooth cloth over the platform to save your mattress, please think of this scenario. I also bought a mattress cover. I placed the mattress to see if it fits. It ripped off my mattress.
👤I was surprised that the bed frame was as cheap as it was, but I am pleasantly surprised that it is holding up. I bought this to go with my new King sized memory foam mattress, I am 120 lbs and my boyfriend is 170 lbs, and we have had no problems with our sleep. I have not experienced any creaking in the bed or the frame. I was able to carry it by myself down the stairs to the bedroom because it was a bit heavy. My younger brother helped me set it up. He helped me pull the thing out of the box and cut some zip ties, but I could have done it myself. It is very easy to pull out the box and unfold the frame, you just need to snap some corners together. If this helped you, please give it a thumbs up, I am trying to get better at writing reviews.
👤I have a deep cut on my thumb when I pulled the bed frame out of the box, there is a sharp metal jutting from the rounded corner where you grab it to pull it out. More people can get serious injuries from this if the product is not better. I wanted to post a picture of my thumb but decided against it because Amazon might not post my review.
👤I've never said this before, but Amazon finally got something right with one of their products. I was expecting short posts after reading reviews. It took me more time to get the package in my house and unpack than it did to assemble the frame and make my bed. It was simple to unfold four auto-locking legs and then use two bolts and two odd little spacers to secure the frame pieces together. I was able to throw my box spring. The bed is tall. Without a box spring, the top of my mattress is above the window I sleep next to. I suppose I could get out a measuring tape, but it would take a lot of effort. Ignore the fact that this only supports sleepers up to 240 pounds. That should have been more than 2200 pounds. I am a fat boy and this thing doesn't move or groan.
👤It's easy to set up but there are two issues to be aware of. My full size mattress slipped because there was no lip to hold it in place. My queen size is heavy and has a soft bottom. The side legs are only half an inch and you'll kick them into bed if you do that nightly. I wrapped the legs in bubble wrap. I still kick them, but it doesn't hurt. I made corner "collars" that are the size and shape of the plastic corner protectors found on standard box springs to keep the full size mattress in place. The platform bed had holes for the headboard. If the manufacturer included foam tubes and snap on plastic collars, they would get five stars. They get three. I get the other two.
The design is stylish and classy. The perfect bed frame is the centerpiece of your bedroom. The frame is made of Sturdy metal and includes secured metal slats and additional metal side rails and center legs. Does not require a foundation. The bed height is 73. Storage can be used beneath the bed. It is easy to assemble. There are multiple sizes of gold and black. King dimensions are 82.50”L x 78”w x 73”h. The weight limit is 500 lbs. King dimensions are 82.50”L x 78”w x 73”h. The weight limit is 500 lbs.
👤I bought this bed for myself and my partner. It was frustrating for the two of us who have worked in mechanics shops. Bolts kept stripping. We thought it was a feature to keep people from over tightening. I felt a bar under me when I climbed in. It was one of the main support bars. I went to sleep after I forced myself to forget about it. My hips were unnaturally low and I woke in the morning immensely uncomfortable. Customer service replaced parts when I contacted them. I flipped up the matress and found four of the major support bars bent over. The support had collapsed around everything else. The bed was mangled one night. They told me a couple of times that they could replace parts but couldn't do anything else. They made a frustrating situation worse by not being willing to talk, but perhaps if a single part was the problem that would have been acceptable. I have never been so disappointed by a product. The pictures don't do it justice, the two vertacle bars us the middle, the head and foot connecting horizontal ones were also drastically bent, the all the support slats were curved like a giant rib cage.
👤I wanted to give four stars for the assembly, but I couldn't because the bed frame is so beautiful. It's what I wanted. The frame is sturdy and the color is deep gold, which will match anything. The footboard and headboard are pretty. It's not easy to do alone since it's a big frame, but it's straightforward if you have a friend for the assembly. The assembly was not nice, and a couple things that were annoying were the chrome screws and the gold bed frame. I broke a screwdriver trying to get the canopy bars to connect with the screws. I got the size 4 screws at the store. It took me more time to get the stickers off of the bed frame than it did to put it together. They were almost fused together. I used half a bottle of goo-gone on one of the big ones. I am so happy with my shiny new bed frame, can't wait to get drapes for it, these are nitpicky, but overall I am happy with it.
👤I love it! Everything was in the box when I put it together. I might replace the screws that connect the center beam to the head and foot board, but other than that, I'm happy!
👤I love my bed. It was difficult to put together and took a bit of time, but it was worth it for the price. I wanted to pull my hair out so I could put it together. I pushed on it to see how strong it would be and it didn't budge. It doesn't make any noises when I get in or out. I don't expect the paint to chip off the poles. I recommend it to you.
👤The bed is not strong for a child or teen. The center broke in three weeks and had to be replaced. Not for heavy people. It's just about 6 feet tall and is a good size. I think you get what you pay for with the price. I'm guessing it won't last long. The frame needs improvement. I'm ok with the bed as it is cute, but I wish it was taller and better built.
If you prefer a clean, simplistic look in the bedroom, it doesn't mean you have to sacrifice durability; the steel Trisha platform bed supports your mattress without stealing focus. 7-inch platform height is perfect for taller mattresses or for those who prefer their bed lower to the ground; twin size supports a maximum weight capacity of 350 lbs, while all other sizes can support up to 700 lbs. Reliable wood slats are designed to support and extend the life of your latex, memory foam or spring mattress without the need for a box spring. It is easy to assemble, all parts, tools, and instructions are shipped straight to your door in one efficiently packed box, and set-up takes less than an hour with a friend's help. The mattress is sold separately. The mattress is sold separately.
👤If you have a lot of tools, easy assembly takes about 30 min. The geometry was perfect, and it was surprisingly made. Instructions were easy to understand and the packaging was protected.
👤I have had it for almost 2 years and no problems. Frame has been able to store many boxes underneath with no problem. If you have a robotic vacuum and oversized top sheets, you'll need to pick the corners of the comforter/sheets from the floor so the Roomba doesn't get stuck. So far, so good! A great bed frame. It allows our little 10 lbs pomeranian to jump on and off the bed as she pleases throughout the night, and it eliminates our worry of her falling off the bed. Our bed frame is a low platform one and allows our Roomba under it. The assembly took less than an hour and included unpacking and cleaning up packaging. All parts have step numbers on them and are easy to assemble. If the bed frame doesn't hold up our weight, we may need to update the mattress with a new one.
👤The frame makes a squeaking sound when it's been a month. The bed will cause squeaks, non-stop squeaks, but so far there are no squeaks during sleep or moderate movements. I don't understand why the bed is squeaking since it has never been under more than 200 lbs. This is not half of the bed frame's maximum capacity. The bed has never been jumped on or abused and I assembled it correctly, it's simple as can be. I decided to keep the bed and try to repair it. I'll use Loctite Thread Locker to reset the bolts. I might use candle wax to coat the surface area in each of the corners where the frame bolts together and at the same time there is a 2 inch metal overlap of the interlocking frame pieces. The rubber washers could help prevent the bolt's head from squeaking. I'm prepared to replace the bolts with self-tapping screw-in bolts for a tighter fit. The last resort would be to have the frame welded into one piece and do away with the bolts. I believe I'll get a quiet bed, which is what my old wood-framed box spring bed provided when it was elevated by hidden concrete blocks instead of using a conventional bed frame, and I always attach my bed head board to the wall to prevent it from squeaking. I like a platform bed without a box spring, and I found out about it with this steel bed frame. It gives a lot of support. I'm going to try to make it work, but I can't recommend this frame because of its moderate squeaks.
👤The bed is good for the price. The frame is lightweight and has a clean look. I am really pleased. The wooden slats were held in place with the help of the Velcro tape. The wooden slats are lined with sticky tape to help keep your mattress in place. 30 minutes was the time it took to unpack and assemble. The instructions were easy to follow and the parts were clearly labeled. The fabrication was a bit off. The support posts under the center beam were removed 1/3” from the floor once the frame was assembled, causing the beam to bow slightly once weight was set onto the frame. The side beams and footer didn't align well on all four corners, which put additional tension on the bolts. I tried to get the bolt in with the allen wrench, but it was too weak. There are better beds out there. Not at this price.
Sturdy and durable steel. If you want to upgrade your bed frame and box spring, you can do so with this simple-to-build and easy-to-maneuver mattress foundation. The design is made of durable steel and has multiple points of contact with the floor and plastic caps to protect it. All sizes of mattress can be rest on top of the steel slatted platform, but narrow twin, twin and twin XL sizes can support up to 750 lbs. It takes less than an hour to setup with all the tools, parts and instructions packed into one Compack shipping box. The mattress is sold separately.
👤I used brackets to hold my mattress in place. Attached is a picture.
👤The welds on the middle section have separated in 3 different places. Poor quality of frame really disappointed me. The company did not respond to warranty requests by February of this year. There are a lot of comments to the negative reviews of the company stating that there is a 5 year warrant and email and phone number. I have not received a response from the company to my original review. The customer support email address does not respond to email when the 800 number goes straight to voicemail.
👤I love this bed frame. The mattress sliding was one of the reviews I saw. I added hot glue to the slats to give them some grip, instead of putting the mattress on them. Works well.
👤I bought this for my nephew. His mom called me last night and said the frame broke. The description makes these seem to be impervious. I asked my sister how it broke, and she said he sat on one end to put on his shoes and it broke. My nephew is a teen who is around 120 lbs, so he wasn't the issue. The beds are covered for 5 years if the damage was caused by faulty manufacturing. Will wait to see what happens. If the bed frame is not replaced, will be very disappointed. Will update with my case later. There is an update. ZINUS agreed to replace the bed frame after sending them an email with purchase invoice and pictures of where it broke. The bed frame arrived today. I am very satisfied with their service. I will not buy a new bed frame from them again. Thanks ZINUS!
👤This was purchased in the spring of 2016 It was great for a while, but at the end of 2016 it started to fall apart. I don't have sex in the bed, I just hang out or sleep in it, and I don't jump or flop on it. The bars started to fall off of the little metal lips. There was nothing to hold up the bars after they snapped off. I have had to duct tape it several times. It is sinking in the middle. I will have to tape it up once a week at a bar. The bed frame is not good. I would rather sleep on the floor.
👤The bed frame is ok for basic use. There are 2 negative comments I have. You can feel the steel rod when you sit on the bed, because the frame is 6 inches wide. I bought a foam mattress. When the weight is distributed, it's ok to lie flat. I am going to put a support on it. If you are not careful, the corner will hit your leg. My leg was injured. This reminds me to put something down. It is easy to assemble, does not rattle, supports my weight and serves my basic needs, I just added a board from Lowes that costs $7. It is better now.
Steel is strong and durable. Go Minimalist - Less is more, especially with this modern and structural sound foundation that gives both strength and understated sophistication to your bedroom, two qualities that never go out of style. 13 inches of underbed space is perfect for storing extra odds and ends on a 14 inch platform. Reliable metal slats are designed to support and extend the life of your latex, memory foam or spring mattress without the need for a box spring. All parts, tools and instructions are shipped straight to your door in one efficiently packed box for simple set-up that takes less than an hour with a friend's help. All sizes can support up to 700 lbs, but the twin size can support up to 350 lbs.
👤I spent money on a defected item because I thought the same thing and was so frustrated. I put the frame on its side and pushed the outer beams inward. I tightened them on its side. Thank goodness! I wrote this review to help other reviewers. I feel like you are frustrated. It will be okay to tighten if you flip it on the side. I docked two stars because of that. The instructions should have said that.
👤Do not buy this item. You can read my entire review. It looks like it would be a great bed. The cross bars need to be about 1/2 inch longer. You have to be very careful if they fall out, and then you have no support. My son is 15 years old. The bars are going to come out of the bed every time. I put a sheet on and a bar came out. The bar can't be put back into place after the end piece came out. The bottom of the metal frame had one of the end pieces out when I opened the package. It was wrapped in a different part than the one it was supposed to be. I don't believe it happened during shipping because it was bent when I opened it. The end piece wasn't even with the piece it went to. It was easy to put together, I did it myself. I think my 6 year old could have put it together. I wonder how it will hold up when my 15 year old sleeps on it. Update... I suspected that the bars don't hold up after 3 months. I have to get a new bed because it is falling apart. Another update... We got a bed. Put it up the next day. September 5th is a whole 4 months later. The entire bed is falling apart. My son is scared to sit on it.
👤This is a great bed. There are a few minor problems with this, but it's a good idea and we have no fears of it holding together. I use a king size of memory foam. The slick top makes it hard to put a bedskirt over the mattress if it is not too heavy. Multiple supports in the middle make it more difficult to organize longer boxes and I would prefer it was just a bit higher. It works, but it is not as functional as I would like. Assembly takes a while, and the tools are poor. If you have an impact driver with an allen head, be careful not to strip the screws as they can mis thread or over Torque.
👤The bed frame is easy to put together because I am good at it. I never got to try the bed frame because it was too short. I ordered a Full and it's clear that I received some correct pieces. I put in a request for support almost 24 hours ago and haven't heard back. I'm not sure when I'll hear back, but I have unusable chunks of metal taking up a large part of my bedroom, and my goal of building my bed frame yesterday is long gone. If I can prepare it in a week, I'll be lucky. Disappointing. Don't buy from this brand. One piece being short is a mistake, more than half the pieces not fitting is a pattern.
72" W x 84" L x 15" H. The foundation can be used as a foundation or platform bed frame. A steel frame with wood slats. The slats are held together with a cover to prevent shifting. The quality is better than the low cost platform beds. The legs transform the platform bed to a mattress foundation.
👤Terrible. The entire bed frame became twisted and broken after we slept on it for 3 nights. The support in the center of the frame was bent away from the rest of the bed. I don't suggest this frame to people over 100 lbs. A child would not be able to sleep in this. It isn't made to support adults or couples. Spend your money somewhere else.
👤The middle support of the box was completely bent and all the welds had snapped, as soon as I opened the box. There were multiple rips on the fabric. The bed's brackets are bent. The areas where the legs are welded in where the tabs are broken are where the legs can't be put on. This bed was the biggest piece of junk I have ever bought. Don't buy this! They were very disappointed that they would ship this out or the way it was handled.
👤When I moved out of a King size bed, I got two really good Twin XL latex mattresses. The frame is on all four sides so you don't have to arrange the beds in a certain way. I put it together in about an hour. I ordered a second one to match as I can put them in the same room when needed or they can sell them off as a set when I fall off my perch. They are sturdy and practical. I love it! I enjoy it every night.
👤It was tried to make it easy to assemble. Didn't do the same for the center frame. It looks decent. There were two screw holes in the center support that had to be re-drilled. It was 10 times harder to put it together because the metal brackets were bent. Nothing was disturbed. The "wood frame" is only a few boards covered in fabric. I bought a frame that doesn't fit a twin mattress. Hangs off the side. The entire frame is cheap. I am very disappointed with this frame. The asking price is not worth it. I would have been less upset about this purchase if I'd paid more for the quality and build of this frame. I heard a board crack as I got up to start my day. I would give this product a zero rating.
👤We bought this bed in June of last year. It was easy to assemble. There were little creaks and things that made noise when you got out of the bed by August. The issue has persisted despite the fact that we had the king size frame. We are both at least 215 lbs and this still has been an issue. It looks great, easy to assemble, but it seems like it wears down quickly. It's not a great value if we just got a bad one.
👤This seemed to be true. You think it will be strong while you assemble it. After the second night, we were both on the bed and rocking back and forth. The noises started on the third night. It was an old bed when you were there. I think this would be a great option for a twin bed or even a bed you keep in the corner of a room to cut down on sway but with our California king in the middle of the room, this is a nightmare.
Fast and easy assembly is possible with the Quick Lock Construction. Increased mattress life is supported by strong steel. The need for a box is eliminated. It allows for under bed storage. There is a worry free 5 year warranty. There is a worry free 5 year warranty.
👤Someone used the phrase "snapped together", not so much. That's not a bad thing. It was a good kit with good hardware that went together with one person. There are a couple of words on materials. There could be sex on this thing. The close proximity of the slats is better than my old box spring, which makes my new latex mattress perform better. My highest rating is 4.
👤Sturdy frame. I have no concerns about stability because I'm a bigger guy. It wasn't hard to put together. The only complaint I have is that the metal surface doesn't have a lip to keep the mattress from sliding. The Tuft & Needle mattress is heavy, but it slides around the frame at the slightest nudging. I was able to fix this by attaching rubber cabinet liner around the outside of the frame and along some of the interior slats. The mattress doesn't slide around as much with a box spring. It would be nice if this was included.
👤It was very easy to put together. I like the Allen wrench because I'm not as strong as my husband. I was able to get a grip on it thanks to the Allen wrenches. It works perfectly in my platform bed. So far, so good!
👤The platform bed frame was the reason I got it. When I turned over mid-sleep, the sound woke me up. I needed something to get away without using the box spring, and this did the job. It was easy to put together and took about 20 minutes. I don't know if I'm crazy or not, but I've slept like a rock since I bought this, and I have no pains when I wake up. I'm not sure if the bed frame is making a difference or not, so I'm not going to question it. I was worried about the max weight, but I was not. I'm 350 lbs. It holds me in good stead. I believe that the max weight is 500, but I feel like it can hold a little more. I am very happy with this purchase.
👤This is a great bed frame. They thought through the assembly and it looks nice. About the assembly. The screwhole has a number next to it and you have to match the two that have the number 1 on them to get the screw. The screws are turned with the help of the allen wrenches, spare screws, and a few other things. You go to the ones that have 2 on them. You put the slats in after number 11. You can't see the numbers after you're done. It might be difficult to get some of them to go in if you tighten the screws before the slats. I did it by myself in 20 minutes, and I was moving a lot. I was impressed with the ease of the process. The frame is sturdy and good looking. It's a good height, I put a mattress directly on it, and it ended up at the height of my old setup. It's from the floor to the top of the mattress. It has a clearance from the floor to the bottom of the frame that is enough to fit a 70qt storage container underneath. I bought this frame with the intent of buying a 4-pack of those, and it worked out just as I had hoped. I'm really happy with this frame. You won't be disappointed if you give it a go.
It's easy to assemble a supportive foundation for a mattress. No tools are required to assemble the bed frame and box spring. Every mattress type is supported by the platform metal bed frame. Not included are mattress, box spring, and bedding. Good services and high quality bed frame are always offered. Good services and high quality bed frame are always offered.
👤The product was good. The bed is very cute. Some reviewers had mentioned that some of the bars had been dinged and/or paint chips. Unless you are against a wall or in the corner of a room, the mattress is very easy to slide on. The mattress doesn't slide in a bed frame because the rails that hold it are not inverted. This was something I hadn't seen other reviewers mention, so I learned the hard way. This was a common topic in the questions. I will try an anti-skid mat to see if it helps.
👤I am a student and I move frequently. I don't want to spend a lot of money. I don't want to sleep on the floor. This is a compromise. It looks like a nice frame once it is assembled and a mattress is on it. It is not true to size, but it is a very tight fit. Several pieces came noticeably rusted, with the paint peeling off in places. Poorly made parts made construction a chore. There are enough supports that I don't see a problem, but for heavier customers or couples, this is a cause for safety concerns. I am content with the purchase, if not happy. I think it will do the job for a short time, but it's not a good idea for anyone looking to invest in a good quality bed frame. It is best for students or people expecting to move again within a year or two.
👤My toddler will love this bed because it's big girl bed. It works well with our scheme. It is small and not overwhelming for a small space, but high enough off the ground for great underbed storage. The bed was easy to assemble. The instructions were clear and concise. The slats were the hardest part. I found that starting to install them from the head/foot/fixed center of the bed was the easiest way to go. I found that if I pulled the bed rail just slightly, it helped to install the slats. I covered the slat with a towel and a hammer swing to get it into place, because I had trouble getting it into one of the holes.
👤Exactly what I was looking for. She liked sleeping in her big girl princess bed. It was easy to put together.
👤I needed a cheap bed for my child. The reviews were good and this one fit the budget. It only took 20 or so minutes to put it together. The included tools were sufficient to complete the job. The instructions were easy to follow. The bed is very sturdy and stable, however it is light. If your child uses a bed as gymnastics equipment or a jungle gym, you should get a wood frame bed. It's a good bed for a kid. I ordered the Linenspa spring mattress to use. I have a legit bed setup for my kid for less than $150. Can't complain.
👤I can't find my original review. My daughter received a bed frame a few months ago. I had originally given it a 1 star rating. It is a 0. The bed is falling apart, it doesn't sit on the floor, and the screws have broken. My daughter is sleeping in her mattress on the floor until we can find a better quality product, because we have disassembled it, three of them in the trash. I will never buy from this company again. The quality of this product is substandard and should not be sold. They should give me a full refund for this pile of junk.
Steel and Plywood are durable. There is support for the modern bedroom. The Mia Platform Bed Frame checks all the boxes for lovers of clean lines, simple silhouettes and long-term reliability. The foundation is made entirely of steel and can support many years of Snoozing, twin size supports a maximum weight capacity of 350 lbs, while all other sizes can support up to 700 lbs. slats are 3 inches apart and have no need for a box spring to support latex, memory foam or spring mattress. All parts, tools and instructions are shipped straight to your door in one efficiently packed box for simple set-up that takes less than an hour. The mattress is sold separately.
👤Do you have a nephew in school? A daughter who watches too much TV is considering getting a date. Someone who's sworn off of men forever? Is it possible that a romantic partner would prefer his/her bedroom activities to be as gentle as possible? I have a bed frame for you. For the rest of us, consider a different path. There is a pic related.
👤This bed is a complete failure. Don't waste your time building it and then sending it back. I have worked at an engineering firm for 12 years and am mechanically inclined. I will tell you that the bed design was a complete failure. The joint pivots allow the whole end of the bed to shimmy about 2 inches back and forth while the legs and feet don't move, because the headboard cross bars only have one bolt each on either end. To see what I am talking about, watch the video. After building this bed, I decided that it was not going to last for my 15 year old and that we should buy a new one. We only used it for a couple of days. When I tried to return the bed, I contacted Zinus. I was hoping they would give me a discount on a different bed frame. I was told to return it through Amazon. I returned the bed and ordered a different bed from Zinus that was designed differently, and so far we have had no issues. The twin bed frame design from this company is a complete failure and they need to stop selling it or redesign it. I am not sure if the larger frame sizes are the same as the twin, but it is definitely not.
👤The product was easy to set up. After only two months of use by a person of 100 lbs., it began to make noise and the center piece of the mattress broke. I contacted the customer service of Zinus to get a replacement part and screw for the bed frame, because I registered for the "warranty" on the product on the website. I have submitted two difference ticket claims, sent them at least 8 times, and not received a single response that was not an automated "we will contact you." I called the customer service number and was told that they couldn't do anything and that I had to wait for the other department to respond to my emails. I can't even get a reply about getting a replacement part. I am very disappointed in the company who doesn't stand behind their products.
👤This is a good bed. I got three of them. Some of the bad reviews come from people who don't like mechanical engineering and don't know how to tighten a bolt without over tighten and striping out the screws. There are a couple of tips that I have. Before you tighten it down, put the whole frame together very tightly. Loctite Red will help the bed frame from backing out and squeaking during extracurricular activities. Don't jump on the bed, it's not a trampoline. If you can't help but jump on the bed, buy a trampoline to sleep on. I hope this helps people. Get yourself a good night's sleep.
Canopy platform bed products from Olee Sleep. In this article about canopy platform bed you can see why people choose the product. Haageep and Amazon Basics are also good brands to look for when you are finding canopy platform bed.
Olee Sleep, Haageep and Amazon Basics are some of the best brands that chosen by people for canopy platform bed. Find the detail in this article. Novogratz, Zinus and Classic Brands are also brands that their products are worth to check.