Raises beds, couches, armchairs, desks, sofas, and other heavy stationary furniture height 3 inches to assist the sit to stand process and boost ergonomics. Solid carbon steel and the bottom of non-woven fabric are used to make Protect Your Hard Surfaces. Furniture movement can damage hard floor surfaces. The risers protect your floors from scratches and marring. Adding additional height and storage space under beds and furniture makes cleaning underneath furniture easier for robot vacuums. Self-Adhesive bed risers are easy to use, just peel off the back cover of the risers and stick on the furniture legs. The 4Pack Furniture Risers have a length of 2.4 inches and a width of 2.4 inches. They work closely with the manufacturer to make sure their product is up to quality standards. If you don't like the product, you can email them and they will give you a full refund or a replacement for free.
👤I use Better Homes & Gardens 8 cube organizers for record cabinets. The cabinets are from Walmart and come with a metal base and legs. BH&G did not add middle legs to support these pieces. The middle of the record cabinet was starting to bow due to the weight of the vinyl. I ordered them. The metal base and legs were placed under the cabinet. The middle risers and six total took care of the bowed cabinets by adding support. These things look great. My vinyl is very appreciative of the support.
👤They are made of sturdy metal. They don't want to scratch the floor. Needed to raise a side table to use with stools. Sturdy and stylish.
👤They were used to raise my over-the-toilet shelves. It worked out great.
👤These are small lifts that will allow you to add a soundbar in front but not block the remote control sensor. HACK!
👤Sturdy and discreet! Lifts my table and does what I paid for it.
👤Sturdy and should hold up. They are giving me more than 2 1/2 inches lift that I needed so I can put totes under my bed, using them with the plastic lifters I have.
👤I like that they felt on the bottom for sliding on a hard surface and the sticky top for adhering to the couch legs.
👤I used these to elevate my cat tree, so I could place it over the AC/heat vent, and it worked perfectly. It's high enough to let air circulate and not make the cat tree unbalanced. The cat tree will not just slide off of it, so the glue on the side helps me feel secure.
The set includes anti-slip foam pads for the top and rubber pads for the bottom of the risers. Each of the 8 risers has an elevation of up to 2 inches and is capable of lifting 10,000 lbs. The bed risers are made from the highest quality plastic and can hold up the heaviest of weights. Storage space is provided by elevating the bed with a stacking option and anti-slip padding. The risers can be used for a variety of lifting purposes, such as raising furniture, desks, sofas, beds, etc., and it provides storage space while protecting your furniture and floor.
👤I don't have time for this.
👤The bottom and top of the risers are padded. That is not true. The set of 8 risers only have 4 foam pads for the top and 4 for the bottom. A complete set of 8 of each.
👤I wanted to raise my bed up to a level that I could store bins underneath. I have a bed with wheels. The risers are very sturdy, but if you stack them higher they will become unstable, since they do not grade out at the bottom. I put them under the wheels on my bed. The description says you can set the wide wheels in the grooves at the top of the block, but it's not true. I put the sheets back on when the bed fell over. I don't use these for raising a bed more than 2 blocks high, and even if you do, you need to take the wheels off to make sure they are secure. I plan to keep them since they are so sturdy, but I will use them for something else since they don't have people moving around on it.
👤These are great for raising the furniture, but buyer beware. There is only enough non-slip pads for four risers in the package that I purchased. This doesn't make sense to me. I would have bought another brand if Iyar had known this. At the time I purchased these, they had enough pads for all eight risers. What happens? Extra pads for the ones that need them and nothing. I need to find replacement pads.
👤They came in an 8 pack. I used 4 to raise my sofa and 4 to put it under the bed to create an inclined sleeping surface as a prevention measure. Can't say enough good things that sleep to treat gdr. I would have preferred wood, but these fit the fat sofa legs, I feel safer with the bed frame legs sitting at the top of the recesses. The middle legs of the bed frame are supported by the 1" Fasonla risers. I'm giving 4 stars because it's too early to know if they are thick and study enough to hold up over time, not because I've noticed any problems in those areas. Being able to vacuum under the sofa is great.
👤I planned to use all of them on their own, but they work great and I wanted to use two for the headboard and two for the little support pegs in the middle of the bed. Four foam pads were provided. It wasn't a big deal. fine It was odd. I would order them again.
👤I did not read carefully. The listing says 4 pads and 8 risers. That doesn't make sense. I can't use half of the risers because I bought two packs. I don't want to protect half of my floor. Everything is great.
👤I bought this for two reasons. An older model roomba would wedge itself in the curve of the sofa and get compressed in the carpet and not have enough strength to get out. I thought a taller sofa might be nicer. If it were just at the right height, I would not have to put my knees above the waist. The solution seemed easy, but maybe not the best. I thought replacement legs would be the best, but they are hard to come by. I decided to try these out and so far they seem to work out well and address both of the problems. -- It's quite tall because of the 4 sets of 2 Pieces. It's easier to get up and down from the sofa when you're tall. The Roomba is no longer stuck under the sofa. This will be a set of four, either stacked or one piece with four pieces that would be useless without a lot of effort. There is still a small amount of wobble in the double stack configuration. I have found that foam works better than rubber. The support lines can bite into the carpet more and give less play. I feel these add more height and address the Roomba getting stuck, which makes it easier to get up and down from the sofa. They are a viable solution. The sofa already had 5 inch legs, so replacement legs might have been a better solution. I would have needed to find legs that were hard to find, but would probably look better and have zero play in them if made right. I plan to keep using this option because it was cheaper and easier.
Buy with confidence was designed and manufactured by the company. The trusted source for stylish furniture. For every budget and taste. This product can be used for most of the bed frames. The size is 5.8in, 7.8in, and9.8in, with an adjustment from 8.6 to 8.6. Simple assembly. The package has 2 furniture legs and 4 screws. The furniture legs need to be raised. It is easy for beginners to put it into service. There are two furniture legs with a load capacity of about 300 kilogrammes. The furniture legs are made of iron, which has a high load-bearing capacity, even after many years of use. There is a glue pad at the bottom of the leg. There is a satisfactory warranty and service. If you find the product damaged or missing, please contact their customer service center. They will give you the best solution. Saving money on bed repairs and mattress replacements can be accomplished by using the bed frame support legs. The design is a cost effective way to maintain your expensive bed frame.
👤The quality is not good. As the bolts and nuts are tightened, the brace portions weaken. There were only three spots welded around the entire top portion of the support leg to hold the bottom portion of the brace. I tightened the bolt/nut assembly after one weld cracked apart. I recommend finding another solution. I would like to get my money back through Amazon.
👤It was just terrible. There are very few bed supports that are thin enough for this to work on, and low quality, measurements aren't correct.
👤I have had this bed legs for over a year and they have not shown any signs of wear or bending while holding my old mattress and wooden frame. It works well on carpets, but not on wood floors. I'm going to be honest. My mattress is probably older than 8 years and I've over 200 pounds. All that weight is pushing the frame to it's limits. It creaked all the time before the supports. I think it saved my frame and took a lot of weight off the wood.
👤They were easy to install. The bed used to have three support posts. I added six more support posts to our bed. The bed feels better and we are sleeping better.
👤The supports were easy to use and have been able to maintain a stable bed. The support is too narrow to go around the bed's and tighten securely in place.
👤The Center Frame Slat Support Leg holds the mattress well and holds its support when you are laying in bed. No gripes. I am satisfied.
👤I had to buy a new bed because my one was missing. It worked well.
👤The legs that came with the bed were replaced with these. It took a few tries to get them tight. I had them for about a month and a half. I am plus size and these support my weight.
The bed lifts risers include heavy duty bed risers and friendly customer service. The product dimensions are 5.1" * 5.1" The customer is the starting point for each of their designs. Heavy duty furniture bed risers. The furniture risers are made from recycled and non-toxic materials so they are perfect for your home or office. The heavy duty bed risers can support up to 3000 lbs when used in 6 sets, and the black bed risers can be made more sturdy with a three-dimensional design. The bed risers are compatible with most furniture and can be used for Twin, Twin XL, Full, Queen, King and Cal King size beds. Extra storage space is created. The furniture risers will raise your bed frame by 5 inches, which will allow you to organize your products or make it easier to clean. Please make sure your furniture legs are not more than 2.70" because the extra 5" high riser opening size is 3-1/8" deep.
It is suitable for most of your bed frames. The bed frame support legs construction allows you to add essential support to bed slats or bed frame, protecting your bed and mattress from sagging and damage. The bed frame has holes, so it's easy to install. If the bed frame has no holes, tighten the screws on the bed frame with bed frame legs and auxiliary plate. The bed rail support for wooden bed are made with high-quality steel to prevent rust and corrosion, Leg bottom PVC pad are non-slip and wear resistant, and it has better grip. The bed frame has 2 legs that can be adjusted from 5.1 to 9.6 inches. The design is a cost effective way to maintain your expensive bed base. Saving money on bed repairs and mattress replacements can be accomplished by using the bed frame support legs. The design is a cost effective way to maintain your expensive bed base. Saving money on bed repairs and mattress replacements can be accomplished by using the bed frame support legs.
👤It's easy to install. It's easy to understand directions. It's easy to place hight along rails. I use them as extrahead center and foot support for my mattress frame slates. The two slate frames are held together in the middle by an attached piece of furniture.
👤If it is attached to a flat surface, it will work, but if it is attached to a frame that is round, it won't work. One of the legs was broken, but they sent me a pair of legs right away. I was able to send them back.
👤El colchn est firme y se siente. Muy tiles, con nuevas patas puedo mover la cama.
👤Simple, does what is advertised.
Their Bed Lifts are the strongest on AMAZON due to their new sturdy design. It fits up to a 2.75 inch bed post. Their bed and furniture risers will not scratch or Dent your hardwood floors. Please measure your bedpost before ordering because it has a maximum diameter of 2.75 inches. The Bed Lift System can create additional under bed storage. The Heavy Furniture Lifter is ideal for furniture. Modular design. There are 4 pieces for clearance under the bed. It's great for small bedrooms, Dorm Rooms or Wherever space is at a premium. Also can be used as chair risers. The set includes four risers, which can be used alone or stacked with the additional 5 inch risers. The bed leg or Caster can be secured into the bed riser. There is a LIFETIME GUARANTEE. The Bed Risers are the best Amazon has to offer. Their products are guaranteed to hold up to 2000 lbs. Their products are 100% safe.
👤I put them under the bed because the frame has rollers. I was worried that they would slip or roll off, but the border around the edges prevented that. Extra height is really good. I could put storage bins under the bed.
👤These are great. The "wheel pit" would be helpful to keep the bed frame from shifting. It was great and did what I needed it to do.
👤We decided to get a better quality mattress than the one that came with the trundle bed. The mattress was slightly higher than the original one, so I had to raise the daybed up a couple of inches so that we could fit the trundle under it. The Duracasa Bed Risers did that. The trundle bed is easy to move under the daybed.
👤Lifted the love seat and couch. It's perfect height for Roomba access. It's no longer necessary to lay on the floor. Sturdy and not noticeable. It should fit any size furniture legs.
👤This is what I was looking for to raise my self-esteem. If it came in a different color, I would be happy. I spray painted them white. I put double sided tape around the top of my bathroom to make sure it held up and I moved it around to make sure it didn't wiggle. I have a toddler and they came in handy so much that my brother in-law wants to buy some for his bed.
👤Everything about these isn't flashy, but it's done right. The base is wider than the top to provide good stability from the movement of the head, the design of the reinforcement suggests they can live up to their weight rating, and will last a long time. The leg of the bed, desk, etc. will be kept because of the recessed area on the top. From sliding down. You'd think every manufacturer would do it this way, but just look at how many other products have an insufficiently raised upper edge. I've used mine to raise my desk two inches, with a longish spine, this allows me to sit more upright, helping with posture and reducing back pain.
👤I ordered the DuraCasa bed risers because I have a new leather sofa that was very low to the ground, and it was difficult to get up. Do not shift in place and they fit perfectly. It is very easy to move the furniture around, there are no marks on the floor, and it is as if they were a part of the furniture. If. I would buy them again for another piece of furniture in an instant.
👤Finally risers that don't break in the center. The last set was made so cheaply that I started collapsing in the center. A 2 year old is jumping on the bed. The bed doesn't wiggle on them because they raise it up for perfect storage.
The mattress is sold separately. It is suitable for most of the bed frames. Adding support to your bed and mattress can protect it from damage and sagging. The bed frame has holes, so it's easy to install. If the bed frame has no holes, tighten the screws and attach the bed frame with a brackets and auxiliary plate. The support legs are made with high-quality steel to prevent rust and corrosion, Leg bottom is non-slip and wear resistant, and it has better grip. The complete hardware includes 2pcs height from 7.08" to 13.38", a height support leg, and a supplementary plate. The design is a cost effective way to maintain your expensive bed base. Saving money on bed repairs and mattress replacements can be accomplished by using the bed frame support legs.
👤Did not have instructions. Everything should always have instructions even though it should be self explanatory. They do not extend. I would know if I'm doing something wrong or if it's faulty with instructions.
👤Inexpensive repair for a bed frame. The plastic part was used to support the king bed frame. The mattress was sinking due to a broken part.
👤It is easy to install and support my antique bed with bed hooks at each end. The bed felt unsafe and it was squeaking. I was worried that one of the supports would break. No Squeaks are very sturdy now.
👤It was used on a king bed. These are easy to install but not cheap and will probably last longer than the bed frame.
👤This item works well for what it is intended for. The only problem is that I had to spend more money to get the right hardware.
👤I spent a lot of money on a bed. The support legs were not working well. This caused the water to sink. I was going to replace the entire bed, but I discovered these to try. It was the only problem. Saved us.
👤I couldn't fit the bed frame in the right size.
👤It's easy to install. It was done within minutes. I didn't have to replace the entire frame.
The bed risers can be used to replace the bed caster. The riser set is 3.5 inches high. The risers fit over the bed frame feet. There are no tools needed for installation. Some bed frames may not fit the risers. Measure your bed frame legs and compare them to the bed risers provided. The steel reinforcement ring on each riser is made from heavy-duty plastic.
👤I needed to replace the wheels on my bed frame. One of the six missed quality control because it wasn't hollow like it was supposed to. I tried to get out the extra plastic. I couldn't. I only needed 4 because the two in the center of my bed frame weren't wheels. I like uniform, but now it won't be. I think it is what it is.
👤I only needed four of these because they were added to my full size metal bed frame. I thought it didn't fit because my existing frame legs had a rubber stop at the bottom that prevented it from fitting into the riser. It fit perfectly and gave the bed height after I pulled them out. We wanted to add underbed storage. I haven't gotten those yet but should work. The bed seems to slide on these new feet, but so far it seems sturdy and does the job. It's pretty good for its price.
👤I have an old metal bed frame, so it could have been the problem. I followed the instructions on how to put them on, but they didn't fit. The 4 inch and the 5 inch didn't work for me. I think they would have worked out well if they had.
👤They didn't fit and didn't seem strong enough to hold the queen bed steady. I had to send them back because they didn't work right.
👤The metal bed frame had been replaced with these. The bed was not raised much by these. The original ones were replaced.
👤The plastic wheels were broken on one side of my frame. These worked well to get my frame back to normal. I had to rip off the plastic retainers for the plastic wheels and align the risers to force the plastic remnants into the legs.
👤I have a couch with legs that are a little low. I've tried other risers but they are ugly. These are very small and were perfect for raising my couch that has French legs.
👤When we lost the wheels to our bed frame in our last move, I decided to try these, as we didn't need to move the bed or the wheels, and they were attached very easily and without a problem! I see it to be very strong on my king bed frame.
👤The description makes them seem universal. They did not attach the legs of my bed. The posts are the same size. There needs to be a smaller piece that fits both.
👤The extra pegs may be useful eventually. They look nice. The bed frame has a gold end. It doesn't have padding for the floor, so be sure to have some.
👤The product was nice. The company was great about returning them because they didn't fit our frame. They were sturdy and nice. Good value.
👤The material that supports the bed and slides easily on the wooden floor is very stable, as opposed to the disintegrating coasters that ruined my floor. I would have liked to switch earlier.
Raises beds, couches, armchairs, desks, sofas, and other heavy stationary furniture height 1.2 inches to assist the sit to stand process and boost ergonomics. The design is made of Carbon steel and non-woven fabric. Protect floors and carbon steel bed lifts. It makes cleaning underneath furniture easier because of the additional height and storage space. It's easy to use, just peel off the back cover of the risers and stick on the furniture legs. The 4Pack Furniture Risers have a width of 2.36 inches and a height of 1.2 inches. There is a 100% crack free warranty on Amazon. Other risers crack easily in spite of assurances and that has become the highest rated complaint of consumers but Ezprotekt risers offer 100% warranty against cracking and have been tested to hold over 5,000 pounds per leg.
👤The item description states that it is 1 1/2 inches. These are only over 1 1/2 inches, so not sure which Chinese math was used to measure them. It is possible that the felt pad and adhesion pad will compress in very short order, which will leave you with one INCH of rise. I needed 1.5 inches of rise to measure my chair. These seem to be made well enough, but how difficult is it to measure them and then clearly describe them?
👤Good quality. Nice look. Very strong. I needed to lift a TV table so my robot vacuum could get under it. There is a piece of metal with felt on one side and a sticky pad on the other. These work are perfect for my living room and would be sturdy for a lot of heaver items. The legs of the table won't slide around because of the sticky pads on the risers. I felt the sticky area on the tops after mounting the table on the risers. That way dog hair and dirt won't be visible on the top surface. I will order again after I am very pleased with these.
👤This isn't too heavy. It doesn't interfere with the trundle so it doesn't stick out. It was quick and painless to deliver. The color is a shade lighter than my kids bed, but it doesn't stand out. That was good.
👤We ordered a very expensive bar-table and beach scene. It is very heavy. I ordered it to be the same height. I measured a small wine cabinet and wine cooler to fit under it. The wine cabinet and cooler no longer fit because of the metal bar that ran under it. I ordered the risers in hopes that they would make a difference. Everything fit after we attached them. The plan was saved by them.
👤A bare floor probably makes a difference in the experience of the product. The risers are working on the floor. I waited to review to see if the plastic would break, but it hasn't happened yet. The carpeted floor is helping to prevent my metal bed frame from sliding off, but the glue is helping to keep my bed frame from sliding off. I didn't think about how the risers might sink into the carpet when I got the shorter set. They've given me an allowance to slide more things under the bed, but I probably should have purchased a taller set.
👤They look better in pictures than in real life. I thought they had tape on them to protect them from being scratched in shipping. That's just how it looks. It looks like I have rolls of tape around my footstool. I don't think I'm in to. Not my vibe. Scottish, Scotch, not so much. You can't see them because I pushed them back on the bench.
👤I bought these for our recliners to stop the Roomba from getting stuck. They do what they are supposed to do. A+.
👤I bought this to lift up my desk's Ikea table so I could add lights to it. Works well. You just have to remove the soft padding and add some rubber tape to keep the table from moving.
Extra 3 high is the dimensions of furniture risers. The external size is 3.3 inch. 3 * 3 * 0.6 inch is the internal size. Bed lifters fit into raising up desks, chairs, sofas, couches, tables, cabinets and beds. The problem of raising the foot of rectangular legs can be solved by it. Square bed risers are made of plastic and won't scratch floors. It can handle furniture up to 2200 lbs. Furniture can be lifted to 3 inch, 6 inch or even higher with the option of being adjusted. Bed lifts risers give you more space for storage, they are also better for the elderly because they reduce the burden on the legs and waist.
👤The product is good, but I wish the grooves were deeper so the wheels would have sunk in more securely. It was difficult to get the legs situated by myself without the wheels on the other side rolling off. I had to move them a few times. It will be easier if you have help. I bought a taller frame instead of using it. I was worried that I might cause one or two of the legs to roll off because of my experience setting it up. I used it for 4 months and it never rolled off. I couldn't stop worrying about falling. I decided that I didn't need a good night's rest. It's not a product issue. I wouldn't have had an issue if the grooves were deeper. I think it is 50% for me. I think it's a good product, so don't give it a bad review.
👤I am a heavy set person, so I was leery about how well these "legs" would hold up to my weight and the weight of my foam mattress. So far, so good! You will not be able to move your bed unless you first remove the 6 packages that are needed for a queen size bed. I would recommend these to other buyers because they allowed me the under-the-bed storage I needed.
👤They were sturdy enough for a bed, but not strong enough for a trundle bed. When you sit down on the bed or get up from it, the weight on the risers can shift, tipping them over.
👤I wanted to raise my bed. The bed is a rail. These are the only ones that have a bed rail slot. They work well and are strong. I can put items under the bed now.
👤Needed to make our bed bigger. The blocks were what we needed. It was good quality and easy to install. Very strong. Fast service and a fair price. Thank you Amazon.
👤I bought a similar product to support a table, but every time the table moved, the legs would tip off the risers and everything on the table would end up on the floor. I found the risers to be everything the others were not, based on other reviews. The manufacturer put a lot of thought into the design and they are perfect. They are different in that they have a guard around all four sides and a grooves in the top platform that holds the legs in place. The table is stable because of the bottom pads.
👤These things are awesome. I really like them. There's strong, sturdy and stable. You can stack them to reach the height you want.
👤I bought this product to raise my dorm bed to fit a fridge underneath. It is sturdy and has accurate measurements. I have had them for over two months and have not had a problem.
Raises beds, couches, armchairs, desks, sofas, and other heavy stationary furniture height 2 inches to assist the sit to stand process and boost ergonomics. The design is made of Carbon steel and non-woven fabric. Protect floors and carbon steel bed lifts. It makes cleaning underneath furniture easier because of the additional height and storage space. It's easy to use, just peel off the back cover of the risers and stick on the furniture legs. The 4Pack Furniture Risers have a width of 3.15 inches and a height of 2 inches. There is a 100% crack free warranty on Amazon. Other risers crack easily in spite of assurances and that has become the highest rated complaint of consumers but Ezprotekt risers offer 100% warranty against cracking and have been tested to hold over 5,000 pounds per leg.
👤I have a large sectional couch with 8 plastic, flat bottom feet that are oddly wide and triangularly shaped. This made finding compatible risers difficult, but I'm happy with how they turned out. Make sure you thoroughly clean and dry the bottom of your furniture's feet before applying the strongest and most secure attachment. If you want the felt bottoms to be firmly planted, you can add something rubber to them.
👤My bed has 6 support legs so I had to purchase two packages. The risers came from under the bed legs after the glue loosened. I have to remove all of my furniture from my bed. The storage space they provided was lost.
👤These are amazing. I put them on by myself and you can have a helpers if you want.
👤I looked for risers that were round and added 2 inches to the table's legs. They are hard to find. My table legs are round, and most risers are square. I was thankful to find these because I felt like I might lose my toe. The risers are not cheap. The bottom is felted and the top is protected until ready to use. The sticky side was strong and held its shape quickly. My table is heavy. I was able to get it back into position with the felted bottoms. I would recommend this product to anyone, it's easy to use and looks good.
👤I was not sure if they would work because they stick onto the legs of the furniture. The paper was very sticky when we pealed it off. They are very stable and easy to put on the couches. The look is good, the legs are good, and the height is perfect.
👤The horseshoe design of the table legs made it necessary for me to use 6 risers. The fit was perfect and the support was excellent. The table is very sturdy and the risers blend nicely with the table legs. It was still worth it since these are great, but I wish the option to buy 2-packs or 4-packs was available.
👤A great tool to raise furniture. I needed to raise my table after buying a new office chair. I put two of them on my table. The video has a lot of information.
👤We had to lift a large cabinet up to make it a more usable piece for serving a holiday dinner buffet. The extra 2” in height really made a difference. The blocks held the weight with ease and were a perfect match.
👤I raised my sofa bed. It's made a difference. They arrived on time and were advertised. The biggest challenge was lifting the sofa. I used my car scissors jack to lift each side. It worked out well.
Bed risers for platform bed frame with no legs products from Ezprotekt. In this article about bed risers for platform bed frame with no legs you can see why people choose the product. Utopia Bedding and N+a are also good brands to look for when you are finding bed risers for platform bed frame with no legs.
Ezprotekt, Utopia Bedding and N+a are some of the best brands that chosen by people for bed risers for platform bed frame with no legs. Find the detail in this article. Whynonap, Ruiru Bro and Duracasa are also brands that their products are worth to check.